|
06-01-2008, 03:47 AM
|
#1 |
|
Manual Transmission Club
 
Join Date: May 2008
Location: Grand Junction CO
Posts: 292
|
control arm help
I pulled the control arm bushings off and realized that someone had bottomed out the truck and bent them at the bushing. Is this fixable? I work in a metal shop and can straiten just about anything I guess the real question is should I try?
__________________
79 GMC Sierra Grande, SWB, Heavy Half If I wanted easy I would just buy a NEW truck! |
|
|
|
06-01-2008, 01:16 PM
|
#2 |
|
It Is What It Is,,,,
Join Date: Aug 2006
Location: *The Gun Shine State*Florida*
Posts: 1,765
|
Re: control arm help
Thats a good question. Im no expert on what you want to do. But that steel is pretty thick. Might try see if you could find a set laying around from some one.
__________________
*79 C10 Short Box ST8 6 bang'r * *Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT *__--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............|_(O)_ |___(O) ] FAQ INDEX Thread The Kulture  My Rat Den 
|
|
|
|
|
06-01-2008, 04:49 PM
|
#3 |
|
One day...
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,240
|
Re: control arm help
I got a new (used) set at a you pull it yard, it was around $20 bucks. You may check around it might be cheaper or faster to get another set..
|
|
|
|
|
06-01-2008, 07:02 PM
|
#4 |
|
Manual Transmission Club
Join Date: May 2008
Location: Grand Junction CO
Posts: 292
|
Re: control arm help
I just called my local junk yard and they don’t have them, if they did it would be $35 a piece. The next closest junk yard is like 5 hrs away in either Denver or Salt Lake. New ones are like $109 from Classic Parts. I guess I’ll try to straiten them.
__________________
79 GMC Sierra Grande, SWB, Heavy Half If I wanted easy I would just buy a NEW truck! |
|
|
|
|
06-01-2008, 11:36 PM
|
#5 | |
|
One day...
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,240
|
Re: control arm help
Quote:
|
|
|
|
|
|
06-02-2008, 12:04 AM
|
#6 |
|
Registered User
Join Date: Apr 2008
Location: Pocatello, ID
Posts: 36
|
Re: control arm help
Go to car-part.com. It is a list of salvage yards all over the US and canada with parts menu and search.
|
|
|
|
|
06-02-2008, 04:57 AM
|
#7 | |
|
Manual Transmission Club
Join Date: May 2008
Location: Grand Junction CO
Posts: 292
|
Re: control arm help
Quote:
__________________
79 GMC Sierra Grande, SWB, Heavy Half If I wanted easy I would just buy a NEW truck! |
|
|
|
|
|
06-02-2008, 06:09 AM
|
#8 |
|
Manual Transmission Club
Join Date: May 2008
Location: Grand Junction CO
Posts: 292
|
Re: control arm help
You know what screw it. I’ve been kicking around making my own control arms and think I’ve got my excuse. I figure if I don’t do it now I’ll always wish I had. I have access to a tubing bender, notcher, tig welder hell even a water jet. Any tips on materials or modifications I should make while I'm at it (I’m not lowering or raising it)?
__________________
79 GMC Sierra Grande, SWB, Heavy Half If I wanted easy I would just buy a NEW truck! Last edited by 79gmcsierragrande; 06-02-2008 at 06:10 AM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
