New 6 lug rear end in my 56 GMC

[cadman89]

Originally Posted by Knothead

I would elongate the existing holes(1/2 in. each side) in the pads so it would be on center. Then look at the conversion kits sold by Brothers , CPP . All you really need are U-Bolts and Top Plates. But then shock mounts would become another issue.

I took yesterday off and pulled the rear end out.
Looks like you are correct the inside bolts will be fine and if I drill 2 holes in the old pads and a new centering hole 1/2 " inward on both sides it will bolt right up fine.
I will keep posting pictures of my "Bolt in a late model rear end."















Cadman