Rubbed one out in front of the nieghbors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigbadchev72 · 07-11-2008, 11:27 PM

hahaha I finally buffed it out for the first time since new paint, took out alot of blemishes and water spots

AJs72K5 · 07-11-2008, 11:38 PM

Shiney.

woodymm3 · 07-12-2008, 12:52 AM

are those the right places for all the emblems?
was looking for correct placement for the 350 v8 emblem. was wondering if those were correct?

bigbadchev72 · 07-12-2008, 01:21 AM

no its not, i didnt notice until re-assembly after paint. had holes that needed filled

BLUE THUNDER · 07-12-2008, 03:29 PM

Sweet!!!

msgross · 07-12-2008, 03:43 PM

you could put the "4 wheel drive" emblem in on of those spots, my 68 had it on the front fender spot...

nice truck, looks like you rubbed it till it turned red!

Critter · 07-12-2008, 10:03 PM

Great title! Did the neighbors offer to give you a hand by any chance?

bigbadchev72 · 07-12-2008, 10:47 PM

Quote:

Originally Posted by Critter

Great title! Did the neighbors offer to give you a hand by any chance?

lol no they didnt, but i did catch the neighbors wife looking

haus · 07-13-2008, 12:20 AM

lookin good! what is the name of the color? i'm trying to decide on a color for mine (besides primer grey) and that looks like a good option.

bigbadchev72 · 07-13-2008, 10:56 AM

It is bright red from a 2005 toyota tacoma single stage paint

Big Block · 07-13-2008, 05:08 PM

That's one fine looking Blazer, Danielsan. Wax on! Wax off! Mr Miyagi would be proud.

**Yukon Jack** · 07-14-2008, 10:22 AM

Really looks great. I agree, don't worry about filling the front holes below the turn signals, just get a set of the 4 Wheel Drive emblem's - that's where they go.

jaros44sr · 07-14-2008, 11:31 AM

And yet another one to add to the nice looking Jimmy/Blazer club. This board is full of them, probably more then the P/U side

07-11-2008, 11:27 PM	#1
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Rubbed one out in front of the nieghbors hahaha I finally buffed it out for the first time since new paint, took out alot of blemishes and water spots __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

07-11-2008, 11:38 PM	#2
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Rubbed one out in front of the nieghbors Shiney. __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

07-12-2008, 12:52 AM	#3
woodymm3 Registered User Join Date: Mar 2008 Location: Oklahoma city Posts: 490	Re: Rubbed one out in front of the nieghbors are those the right places for all the emblems? was looking for correct placement for the 350 v8 emblem. was wondering if those were correct?

07-12-2008, 01:21 AM	#4
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: Rubbed one out in front of the nieghbors no its not, i didnt notice until re-assembly after paint. had holes that needed filled __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

07-12-2008, 03:29 PM	#5
BLUE THUNDER Registered User Join Date: May 2007 Location: San Antonio Posts: 993	Re: Rubbed one out in front of the nieghbors Sweet!!!

07-12-2008, 03:43 PM	#6
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Rubbed one out in front of the nieghbors you could put the "4 wheel drive" emblem in on of those spots, my 68 had it on the front fender spot... nice truck, looks like you rubbed it till it turned red! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-12-2008, 10:03 PM	#7
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: Rubbed one out in front of the nieghbors Great title! Did the neighbors offer to give you a hand by any chance? __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

07-13-2008, 12:20 AM	#9
haus MMMM Ramen! Join Date: Mar 2007 Location: Beavercreek, OH Posts: 118	Re: Rubbed one out in front of the nieghbors lookin good! what is the name of the color? i'm trying to decide on a color for mine (besides primer grey) and that looks like a good option. __________________ Tim - 1970 chevy blazer

07-13-2008, 10:56 AM	#10
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: Rubbed one out in front of the nieghbors It is bright red from a 2005 toyota tacoma single stage paint __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

07-13-2008, 05:08 PM	#11
Big Block Big Block Join Date: Mar 2005 Location: Durham, N.C. Posts: 1,649	Re: Rubbed one out in front of the nieghbors That's one fine looking Blazer, Danielsan. Wax on! Wax off! Mr Miyagi would be proud.

07-14-2008, 10:22 AM	#12
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: Rubbed one out in front of the nieghbors Really looks great. I agree, don't worry about filling the front holes below the turn signals, just get a set of the 4 Wheel Drive emblem's - that's where they go. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-14-2008, 11:31 AM	#13
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,467	Re: Rubbed one out in front of the nieghbors And yet another one to add to the nice looking Jimmy/Blazer club. This board is full of them, probably more then the P/U side __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.