Need a liitle help her with power steering bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FRENCHBLUE72** · 07-27-2008, 12:14 PM

Anybody have any clue how this thing goes on its been about 3 years since I removed it and am haveing some troubles getting it back together..

**Stocker** · 07-27-2008, 02:32 PM

That is different than mine, sorry -- but if it helps at all, on mine the slot is on the upper stud on the PS pump, with the lower pump stud being the pivot point.

**FRENCHBLUE72** · 07-27-2008, 08:24 PM

Can anyone help me out here possibly?

d10s69c10 · 07-27-2008, 08:26 PM

*Whips out Camera* Brb!
never mind mine looks nothing like yours. but that does look close to my alternator bracket.

**FRENCHBLUE72** · 07-27-2008, 08:36 PM

Thanks but ya this would be for the power steering on a 454 out of a 75 chevy....

**FRENCHBLUE72** · 07-28-2008, 12:03 AM

Anyone?? imma tring to get this thing fired up...

d10s69c10 · 07-28-2008, 12:39 AM

i can go check out my big block in the morning and get you some pics. but if i remember correctly that 1 of a 3 piece set up on the drivers side. the 2 tp brackets attach to a cast y shaped piece and then another piece of stamped steel below. il post pics first thing.

**FRENCHBLUE72** · 07-28-2008, 07:52 AM

Sweet I have the lower piece mounted already and was not sure if I was missing a piece or not..

70rs/ss · 07-28-2008, 03:49 PM

This piece bolts to the front of the pump and the bolt that slides through the slot goes to the hole on the H2O pump. Hope that helps? The square hole on the end of the bracket is for the AC comp bracket that mounts up top. This is all from memory, but I think it is correct?

**FRENCHBLUE72** · 07-28-2008, 11:02 PM

anyone else have any pics????

**FRENCHBLUE72** · 07-30-2008, 10:05 PM

t.t.t one more time..... anyone with pics????

07-27-2008, 12:14 PM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,601	Need a liitle help her with power steering bracket Anybody have any clue how this thing goes on its been about 3 years since I removed it and am haveing some troubles getting it back together.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-27-2008, 02:32 PM	#2
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,586	Re: Need a liitle help her with power steering bracket That is different than mine, sorry -- but if it helps at all, on mine the slot is on the upper stud on the PS pump, with the lower pump stud being the pivot point. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

07-27-2008, 08:24 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,601	Re: Need a liitle help her with power steering bracket Can anyone help me out here possibly? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 07-27-2008 at 08:29 PM.

07-27-2008, 08:26 PM	#4
d10s69c10 Built 4 Speed Join Date: May 2008 Location: Geneva FL Posts: 619	Re: Need a liitle help her with power steering bracket Whips out Camera Brb! never mind mine looks nothing like yours. but that does look close to my alternator bracket. __________________ 1969 C/10 Short Box: 496/T-56 in worx. "To Be Old And Wise, First You Must Be Young And Stupid" Last edited by d10s69c10; 07-27-2008 at 08:29 PM.

07-27-2008, 08:36 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,601	Re: Need a liitle help her with power steering bracket Thanks but ya this would be for the power steering on a 454 out of a 75 chevy.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-28-2008, 12:03 AM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,601	Re: Need a liitle help her with power steering bracket Anyone?? imma tring to get this thing fired up... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-28-2008, 12:39 AM	#7
d10s69c10 Built 4 Speed Join Date: May 2008 Location: Geneva FL Posts: 619	Re: Need a liitle help her with power steering bracket i can go check out my big block in the morning and get you some pics. but if i remember correctly that 1 of a 3 piece set up on the drivers side. the 2 tp brackets attach to a cast y shaped piece and then another piece of stamped steel below. il post pics first thing. __________________ 1969 C/10 Short Box: 496/T-56 in worx. "To Be Old And Wise, First You Must Be Young And Stupid"

07-28-2008, 07:52 AM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,601	Re: Need a liitle help her with power steering bracket Sweet I have the lower piece mounted already and was not sure if I was missing a piece or not.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-28-2008, 03:49 PM	#9
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Need a liitle help her with power steering bracket This piece bolts to the front of the pump and the bolt that slides through the slot goes to the hole on the H2O pump. Hope that helps? The square hole on the end of the bracket is for the AC comp bracket that mounts up top. This is all from memory, but I think it is correct?

07-28-2008, 11:02 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,601	Re: Need a liitle help her with power steering bracket anyone else have any pics???? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 07-30-2008 at 10:05 PM.

07-30-2008, 10:05 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,601	Re: Need a liitle help her with power steering bracket t.t.t one more time..... anyone with pics???? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.