Rear fender braces needed.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

entourageguy · 08-10-2008, 09:39 PM

The short ones with the opposite bends are for the front fenders.
I need one of those.
Just not sure where the rear ones attach. I'm assuming they go to one of the bolts on the inner box.
Just pulled out my assembly book and it looks like there are 3 braces on the rear fenders and 2 on the front.
2 rears are the same p/n and go from the top of the wheel
well arch to the fender/box mounting bolts.
A 3rd bracket is different p/n and goes from the lower rear portion of the fender to the fender/box bolt like in your pic.
I'll have to crawl under and have another look.

08-10-2008, 09:39 PM	#1
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: Rear fender braces needed.... The short ones with the opposite bends are for the front fenders. I need one of those. Just not sure where the rear ones attach. I'm assuming they go to one of the bolts on the inner box. Just pulled out my assembly book and it looks like there are 3 braces on the rear fenders and 2 on the front. 2 rears are the same p/n and go from the top of the wheel well arch to the fender/box mounting bolts. A 3rd bracket is different p/n and goes from the lower rear portion of the fender to the fender/box bolt like in your pic. I'll have to crawl under and have another look. __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited Last edited by entourageguy; 08-10-2008 at 10:24 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.