|
08-29-2008, 01:24 PM
|
#1 |
|
Registered User
Join Date: May 2007
Location: Emporia, kansas
Posts: 300
|
gas tank gromet.
Removing gas tank for deadening mat install. Is there a secret to getting the filler neck thru the rubber gromet . is there a trick to reinstall? Thanks
It is fairly new so rot should not be an issue Don't want to have to replace if not needed. Gary |
|
|
|
08-29-2008, 01:51 PM
|
#2 |
|
Active Member
 
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: gas tank gromet.
Lots of silicone lubricant...
I've done it both with the grommet installed and without. It was easier to do without the grommet installed first. I lubed the grommet up good and pressed it into the hole with a plastic dowel so as not to damage the rubber. When I installed it with the grommet in already, I had to force it throught the hole. That's where the lube comes in. |
|
|
|
|
08-29-2008, 01:55 PM
|
#3 | |
|
454 MAKES IT ROAR
Join Date: Jan 2008
Location: Essex, U.K
Posts: 2,701
|
Re: gas tank gromet.
Quote:
Lube always makes it slip in and out more easily...."nudge nudge wink wink" 
__________________
Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger |
|
|
|
|
|
08-29-2008, 02:33 PM
|
#4 |
|
Firefighter
Join Date: Feb 2001
Location: Yellville, Ar, USA
Posts: 1,943
|
Re: gas tank gromet.
Don't laugh, but K-Y jelly works great, and no silicone mess on the paint either.
__________________
'72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA  
|
|
|
|
|
08-29-2008, 02:50 PM
|
#5 |
|
Registered User
Join Date: May 2007
Location: Emporia, kansas
Posts: 300
|
Re: gas tank gromet.
Are we still talking about my truck
when saying gromet installed and not installed are we talking on tank neck or truck to slide neck thru?
|
|
|
|
|
08-29-2008, 02:54 PM
|
#6 | |
|
Active Member
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: gas tank gromet.
Quote:
The next couple of times, I installed the tank and then lid the grommet in from the outside. Now, I will add, it was a brand new grommet and therefore real soft. I eased it around the opening with a plastic piece. |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
