Need longer brake lines - help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hollywood68 · 08-29-2008, 12:41 AM

Well, I finally got around to cutting some stock lower arms so the airbags dont rub (and I sit a lot lower) but now my soft brake lines are too short. They reach, but they are tight and old...so I need new ones, but they need to be longer than stock.

I did some searching and someone mentioned that the 3/4 ton lines are longer but share the same ends. Can anyone verifty this for me? Obviously I am open to any other ideas as well. I am hoping to get everything finished up this weekend and back on the road monday so a custom stainless order isnt really in the cards.

Any help would be GREATLY appreciated

Longhorn Man · 08-29-2008, 12:45 AM

I don't know about the length... but the calipers are the exact same P/N be it a C/10 or a C/20.... so the ends would be the same.

hollywood68 · 08-29-2008, 12:47 AM

Now that is a fast response, thanks a ton.

I didnt mention in my original post, and should have, that the truck has front drum brakes....

and after looking at an old LMC catalog the part #'s for the C10 and C20 are the same, so its pretty easy to figure they are not any loner.

Any other off the shelf solutions?

eseaton · 08-29-2008, 08:18 AM

go to a hose shop and have them custom made is about all i can think of

fun in dirt · 08-29-2008, 09:39 AM

I think you may can use the ones from a K20 (4x4)

**steelhorse** · 08-29-2008, 09:39 AM

What about 4x4 lines they would be longer?

sneakysnake · 08-29-2008, 10:28 AM

Change your steel line, and or relocate where the rubber and steel join to give you more slack

hollywood68 · 08-29-2008, 10:43 AM

thanks for the suggestions, spending some time on Napa's online site trying different models to find one that will work. I wasnt aware they gave the length and end info, great resource...

I could relocate the tab at the chassis but the lines are old and coming apart, so I need new lines as well as longer lines.

Willy Prost · 08-29-2008, 11:11 AM

Take a look at inline tube for some of their braided brake hose sets.

I am installing a set on another vehicle I own.

You can get the braided flex line in various lengths. Get the proper AN to inverted flare or AN to banjo fitting and you are good to go.
http://www.inlinetube.com/

hollywood68 · 08-29-2008, 06:35 PM

some stainless braided lines would be my preference, if I cant find any off the shelf rubber then that is the route I will go.

I came across a couple that are longer, but the one that I thought would be ideal (almost 3" longer) have 3" of metal fitting at the back of the brake backing plate....not sure that is going to work out very well

Still searching...

**special-K** · 08-29-2008, 07:53 PM

You can order them from Inline Tube.The guy is gruff when you mention other than stock needs.But,if you know what ends you need and what length they`ll make`em.I had some made after letting him know I knew exactly what I needed and would pay for them regardless.And,the hose(rear) worked perfect.

CG · 08-29-2008, 08:20 PM

Are 4x4 lines a little longer? Just tossing this out there.

myoldchevytruck · 08-29-2008, 09:26 PM

Hollywood, I got my Steel Braided Lines from a Company In California. They came out to around $30.00 each. I sent my rubber lines to assure having the correct ends. If you need them longer, just tell them. Here's the Companies website: http://www.bonacoinc.com/ Ask for Phillip. I was very happy with the final product. Here's a pic of the finished lines:

69TowRig · 08-30-2008, 12:22 AM

I run Crown lines on mine. I think the price was similar to those posted above.

BigSky71 · 08-30-2008, 03:15 PM

Quote:

Originally Posted by fun in dirt

I think you may can use the ones from a K20 (4x4)

Yea, just order the ones for a K20, that is what I did. They are about 4" longer iirc...

**truckdude239** · 08-30-2008, 03:35 PM

www.inlinetube.com is who made my hard lines an rubber lines on my truck if you need the rubbers longer just let them know and they can do it

hollywood68 · 08-30-2008, 04:18 PM

just got some lines for a 67' Chevy Biscayne and they are 3" longer, but the "fitting" at the backing plate end is about 3"....so have to see if they will work or not.

One of the few vehicles that Napa does not list is the K20, may have to make a phone call or two.

08-29-2008, 12:41 AM	#1
hollywood68 Registered User Join Date: Mar 2008 Location: Denver, Colorado Posts: 69	Need longer brake lines - help! Well, I finally got around to cutting some stock lower arms so the airbags dont rub (and I sit a lot lower) but now my soft brake lines are too short. They reach, but they are tight and old...so I need new ones, but they need to be longer than stock. I did some searching and someone mentioned that the 3/4 ton lines are longer but share the same ends. Can anyone verifty this for me? Obviously I am open to any other ideas as well. I am hoping to get everything finished up this weekend and back on the road monday so a custom stainless order isnt really in the cards. Any help would be GREATLY appreciated

08-29-2008, 12:45 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Need longer brake lines - help! I don't know about the length... but the calipers are the exact same P/N be it a C/10 or a C/20.... so the ends would be the same.

08-29-2008, 12:47 AM	#3
hollywood68 Registered User Join Date: Mar 2008 Location: Denver, Colorado Posts: 69	Re: Need longer brake lines - help! Now that is a fast response, thanks a ton. I didnt mention in my original post, and should have, that the truck has front drum brakes.... and after looking at an old LMC catalog the part #'s for the C10 and C20 are the same, so its pretty easy to figure they are not any loner. Any other off the shelf solutions? Last edited by hollywood68; 08-29-2008 at 01:18 AM.

08-29-2008, 08:18 AM	#4
eseaton Registered User Join Date: Jul 2008 Location: Amarillo, TX Posts: 190	Re: Need longer brake lines - help! go to a hose shop and have them custom made is about all i can think of

08-29-2008, 09:39 AM	#5
fun in dirt Registered User Join Date: Jan 2007 Location: Mississippi Posts: 2,119	Re: Need longer brake lines - help! I think you may can use the ones from a K20 (4x4) __________________ '72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432 '85 K30 "Big Nassy" '06 3500 Duramax ...tow truck '06 Silverado SS...DD '06 C1500 WT...DD '07 Classic C1500 WT...DD Built & sold cause can't keep 'em all: '72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190 '55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938 '69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541 '86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619

08-29-2008, 09:39 AM	#6
steelhorse Senior Member Join Date: Apr 2008 Location: Franklinton NC Posts: 1,309	Re: Need longer brake lines - help! What about 4x4 lines they would be longer?

08-29-2008, 10:28 AM	#7
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: Need longer brake lines - help! Change your steel line, and or relocate where the rubber and steel join to give you more slack Attached Images

08-29-2008, 10:43 AM	#8
hollywood68 Registered User Join Date: Mar 2008 Location: Denver, Colorado Posts: 69	Re: Need longer brake lines - help! thanks for the suggestions, spending some time on Napa's online site trying different models to find one that will work. I wasnt aware they gave the length and end info, great resource... I could relocate the tab at the chassis but the lines are old and coming apart, so I need new lines as well as longer lines.

08-29-2008, 11:11 AM	#9
Willy Prost Senior Member Join Date: Jan 2000 Location: Arlington, VA Posts: 398	Re: Need longer brake lines - help! Take a look at inline tube for some of their braided brake hose sets. I am installing a set on another vehicle I own. You can get the braided flex line in various lengths. Get the proper AN to inverted flare or AN to banjo fitting and you are good to go. http://www.inlinetube.com/

08-29-2008, 06:35 PM	#10
hollywood68 Registered User Join Date: Mar 2008 Location: Denver, Colorado Posts: 69	Re: Need longer brake lines - help! some stainless braided lines would be my preference, if I cant find any off the shelf rubber then that is the route I will go. I came across a couple that are longer, but the one that I thought would be ideal (almost 3" longer) have 3" of metal fitting at the back of the brake backing plate....not sure that is going to work out very well Still searching...

08-29-2008, 07:53 PM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Need longer brake lines - help! You can order them from Inline Tube.The guy is gruff when you mention other than stock needs.But,if you know what ends you need and what length they`ll make`em.I had some made after letting him know I knew exactly what I needed and would pay for them regardless.And,the hose(rear) worked perfect. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-29-2008, 08:20 PM	#12
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,841	Re: Need longer brake lines - help! Are 4x4 lines a little longer? Just tossing this out there.

08-29-2008, 09:26 PM	#13
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: Need longer brake lines - help! Hollywood, I got my Steel Braided Lines from a Company In California. They came out to around $30.00 each. I sent my rubber lines to assure having the correct ends. If you need them longer, just tell them. Here's the Companies website: http://www.bonacoinc.com/ Ask for Phillip. I was very happy with the final product. Here's a pic of the finished lines: __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors Last edited by myoldchevytruck; 08-29-2008 at 09:27 PM.

08-30-2008, 12:22 AM	#14
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: Need longer brake lines - help! I run Crown lines on mine. I think the price was similar to those posted above. __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

08-30-2008, 03:35 PM	#16
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,233	Re: Need longer brake lines - help! www.inlinetube.com is who made my hard lines an rubber lines on my truck if you need the rubbers longer just let them know and they can do it __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube



Register or Log In To remove these advertisements.

08-30-2008, 04:18 PM	#17
hollywood68 Registered User Join Date: Mar 2008 Location: Denver, Colorado Posts: 69	Re: Need longer brake lines - help! just got some lines for a 67' Chevy Biscayne and they are 3" longer, but the "fitting" at the backing plate end is about 3"....so have to see if they will work or not. One of the few vehicles that Napa does not list is the K20, may have to make a phone call or two.

Register or Log In To remove these advertisements.