68 Custom hubcaps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mine4now · 09-21-2008, 01:38 PM

I bought a set of what I thought were 68 1/2 ton hubcaps. When they arrived they were from a 3/4 ton truck with the clips. I did a little measuring and if I cut this extra lip off and roll the edge they will work for my 1/2 ton.

Here is the BIG QUESTION
Should I modify these for my truck? I have heard that the 3/4 ton hubcaps are even harder to find than the 1/2 ton.

stllookn · 09-21-2008, 01:51 PM

Good question. I will look at my 68 1/2 ton caps and my 68 3/4 caps to see. I have seen many more 3/4 ton caps than 1/2 ton caps in my many searches.

**special-K** · 09-21-2008, 10:05 PM

I`d look for 1/2t caps.

stllookn · 09-21-2008, 10:21 PM

I checked the 3/4 ton caps and they are made from three (3) pieces. It would be a risky proposition and you might ruin some good caps. I have seen plenty of the 1/2 ton painted caps; "over the nub style" not the 1/2 ton clip style, which are rare.

I have some old GMC stainless 3/4 ton caps that are trashed. I could send you one for shipping and you could experiment on that.

mine4now · 09-22-2008, 01:42 AM

Thanks for the offer, I did have 5 of the 3/4ton hubcaps one went under the knife. It fits pretty well, the edge needs to be rolled better. I actually have 3 of the original 68 chrome dog dish hubcaps and one of the 67 chrome hubcaps but they are not in great shape. I have yet to find a source for aftermarket hubcaps like mine.

**special-K** · 09-22-2008, 05:51 AM

Yeah,these 67/68s are the tuff finds since they are divided between nub-type and clip-type.Let us see your handywork if you can.Thanks

68gmsee · 09-22-2008, 08:11 AM

Quote:

Originally Posted by mine4now

....... I have yet to find a source for aftermarket hubcaps like mine.

Try these guys.
http://www.ehubcap.com/default.htm

mine4now · 09-22-2008, 07:59 PM

Here is a picture of my handi-work. As you can see the hubcap on the left still has the extra ring.
I used aircraft stripper to clean the paint off, then took my grinder with a wire brush and cleaned them down to bare metal. After using a dolly and hammer to get most of the dents out, one got primed the other started to get polished.

**special-K** · 09-22-2008, 10:03 PM

Nice work.That`s really impressive.

mine4now · 09-23-2008, 10:36 AM

Thank you. It's what you have to do when you have no money, but alot of time and tools. I believe it's called "Hillbilly Engineering"

stllookn · 09-23-2008, 08:54 PM

Code:

I believe it's called "Hillbilly Engineering"

I call it "being a champion of the minimalist lifestyle".

Brad · 09-24-2008, 01:18 PM

Quote:

Originally Posted by stllookn

Code:

I believe it's called "Hillbilly Engineering"

I call it "being a champion of the minimalist lifestyle".

I'll have to remember that!

mine4now · 09-24-2008, 07:02 PM

Hey guys do you know what this hole in my firewall is for? Here is a reference shot and a close-up. Just please don't tell me that it was a "Special Corvette Option"

**John Fabris** · 09-24-2008, 07:05 PM

Clutch rod linkage.

mine4now · 09-24-2008, 07:23 PM

Thanks John, my truck is an automatic is there some sort of grommet that fills that hole?

low'n slow · 09-25-2008, 12:21 AM

I've seen both a metal plate that screws on and a plastic piece that slips in. They come up on the parts board from time to time.

09-21-2008, 01:38 PM	#1
mine4now Registered User Join Date: Nov 2007 Location: Southern, California Posts: 66	68 Custom hubcaps I bought a set of what I thought were 68 1/2 ton hubcaps. When they arrived they were from a 3/4 ton truck with the clips. I did a little measuring and if I cut this extra lip off and roll the edge they will work for my 1/2 ton. Here is the BIG QUESTION Should I modify these for my truck? I have heard that the 3/4 ton hubcaps are even harder to find than the 1/2 ton. Attached Images

09-21-2008, 01:51 PM	#2
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 68 Custom hubcaps Good question. I will look at my 68 1/2 ton caps and my 68 3/4 caps to see. I have seen many more 3/4 ton caps than 1/2 ton caps in my many searches. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

09-21-2008, 10:05 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: 68 Custom hubcaps I`d look for 1/2t caps. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-21-2008, 10:21 PM	#4
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 68 Custom hubcaps I checked the 3/4 ton caps and they are made from three (3) pieces. It would be a risky proposition and you might ruin some good caps. I have seen plenty of the 1/2 ton painted caps; "over the nub style" not the 1/2 ton clip style, which are rare. I have some old GMC stainless 3/4 ton caps that are trashed. I could send you one for shipping and you could experiment on that. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

09-22-2008, 01:42 AM	#5
mine4now Registered User Join Date: Nov 2007 Location: Southern, California Posts: 66	Re: 68 Custom hubcaps Thanks for the offer, I did have 5 of the 3/4ton hubcaps one went under the knife. It fits pretty well, the edge needs to be rolled better. I actually have 3 of the original 68 chrome dog dish hubcaps and one of the 67 chrome hubcaps but they are not in great shape. I have yet to find a source for aftermarket hubcaps like mine.

09-22-2008, 05:51 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: 68 Custom hubcaps Yeah,these 67/68s are the tuff finds since they are divided between nub-type and clip-type.Let us see your handywork if you can.Thanks __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-22-2008, 07:59 PM	#8
mine4now Registered User Join Date: Nov 2007 Location: Southern, California Posts: 66	Re: 68 Custom hubcaps Here is a picture of my handi-work. As you can see the hubcap on the left still has the extra ring. I used aircraft stripper to clean the paint off, then took my grinder with a wire brush and cleaned them down to bare metal. After using a dolly and hammer to get most of the dents out, one got primed the other started to get polished. Attached Images

09-22-2008, 10:03 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: 68 Custom hubcaps Nice work.That`s really impressive. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-23-2008, 10:36 AM	#10
mine4now Registered User Join Date: Nov 2007 Location: Southern, California Posts: 66	Re: 68 Custom hubcaps Thank you. It's what you have to do when you have no money, but alot of time and tools. I believe it's called "Hillbilly Engineering"

09-23-2008, 08:54 PM	#11
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 68 Custom hubcaps Code: I believe it's called "Hillbilly Engineering" I call it "being a champion of the minimalist lifestyle". __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

09-24-2008, 07:02 PM	#13
mine4now Registered User Join Date: Nov 2007 Location: Southern, California Posts: 66	Re: 68 Custom hubcaps Hey guys do you know what this hole in my firewall is for? Here is a reference shot and a close-up. Just please don't tell me that it was a "Special Corvette Option" Attached Images

09-24-2008, 07:05 PM	#14
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: 68 Custom hubcaps Clutch rod linkage. __________________ John Fabris 67 C10 SWB

09-24-2008, 07:23 PM	#15
mine4now Registered User Join Date: Nov 2007 Location: Southern, California Posts: 66	Re: 68 Custom hubcaps Thanks John, my truck is an automatic is there some sort of grommet that fills that hole?

09-25-2008, 12:21 AM	#16
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 882	Re: 68 Custom hubcaps I've seen both a metal plate that screws on and a plastic piece that slips in. They come up on the parts board from time to time.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.