292 L6 carb. questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Arekusu · 10-12-2008, 02:26 AM

Hi all. I'm looking for some recommendations on my 292. Right now it's bone stock with out a rebuild (for now) I have headers on the way but I'm wondering what I should be doing on the breathing side. Intakes for these things are almost all the same so I'm gona go with Clifford. But I want good gas mileage. I was thinking about progressive carbs. or maybe a 2 bbl or 4bbl. This truck is gona be a daily driver but when I put my foot all the way it in it I want it to turn this thing on instead of gasping for breath with the 1 bbl currently on it. Any ideas / recommendations would be great. Thanks!

Alex

manimal · 10-12-2008, 09:52 AM

I have done alot of reading on these as I have one too. It's my understanding that the OFFY intake(offenhauser) 4bbl is better on the street than the clifford. Also go with the Holley 390 or Edelbrock 500. Check out webrodder.com Read the build-up of "Six Pack to go" Very nice 292 build up. I am planning on something VERY similar. Good Luck.
-Lance

Arekusu · 10-13-2008, 02:00 AM

Thanks for the info. I think I'm going to use the clifford rebuild kit. I guess I'm leaning towards the Edelbrock 500. Does anyone seem to have any good links besides stovebolt for these things.. maybe someplace to get parts too? I'm still slightly clueless on the L6 but hope to get educated. Thanks!

manimal · 10-13-2008, 09:20 AM

inliners.org
webrodder.com

D13 · 10-14-2008, 05:30 AM

Must be nice to live where you don't need mainfold heat to keep the gas atomized.

the Clifford manifold with water heat is best for the colder climates. I've heard the Offy is better unless you neeed the heat.

Brad · 10-14-2008, 11:06 AM

After having both installed, I'd go back to the Offy if I weren't trying to sell my truck. You'll get good results with either however.

**'68OrangeSunshine** · 10-15-2008, 09:36 PM

I'm running a 292, bored .030 over, with an Offy intake and Clifford Research headers. Carb is an Edelbrock 1404, manual choke, 500 CFM Performer [AFB type]. No carb heat, I live in Tucson, AZ.

Arekusu · 10-17-2008, 01:09 AM

Thanks everyone for helping me out. Here in New Mexico it does get cold just later and for not at long.. (it is a desert.

) If anymore of you L6 guys on here have any ideas for an engine build or recommendations I'm all ears. Thanks again!

10-12-2008, 02:26 AM	#1
Arekusu Registered User Join Date: Mar 2008 Location: Arlington, Va. Posts: 335	292 L6 carb. questions Hi all. I'm looking for some recommendations on my 292. Right now it's bone stock with out a rebuild (for now) I have headers on the way but I'm wondering what I should be doing on the breathing side. Intakes for these things are almost all the same so I'm gona go with Clifford. But I want good gas mileage. I was thinking about progressive carbs. or maybe a 2 bbl or 4bbl. This truck is gona be a daily driver but when I put my foot all the way it in it I want it to turn this thing on instead of gasping for breath with the 1 bbl currently on it. Any ideas / recommendations would be great. Thanks! Alex

10-12-2008, 09:52 AM	#2
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: 292 L6 carb. questions I have done alot of reading on these as I have one too. It's my understanding that the OFFY intake(offenhauser) 4bbl is better on the street than the clifford. Also go with the Holley 390 or Edelbrock 500. Check out webrodder.com Read the build-up of "Six Pack to go" Very nice 292 build up. I am planning on something VERY similar. Good Luck. -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

10-13-2008, 02:00 AM	#3
Arekusu Registered User Join Date: Mar 2008 Location: Arlington, Va. Posts: 335	Re: 292 L6 carb. questions Thanks for the info. I think I'm going to use the clifford rebuild kit. I guess I'm leaning towards the Edelbrock 500. Does anyone seem to have any good links besides stovebolt for these things.. maybe someplace to get parts too? I'm still slightly clueless on the L6 but hope to get educated. Thanks!

10-13-2008, 09:20 AM	#4
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: 292 L6 carb. questions inliners.org webrodder.com __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

10-14-2008, 05:30 AM	#5
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: 292 L6 carb. questions Must be nice to live where you don't need mainfold heat to keep the gas atomized. the Clifford manifold with water heat is best for the colder climates. I've heard the Offy is better unless you neeed the heat. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

10-14-2008, 11:06 AM	#6
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: 292 L6 carb. questions After having both installed, I'd go back to the Offy if I weren't trying to sell my truck. You'll get good results with either however. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

10-15-2008, 09:36 PM	#7
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,451	Re: 292 L6 carb. questions I'm running a 292, bored .030 over, with an Offy intake and Clifford Research headers. Carb is an Edelbrock 1404, manual choke, 500 CFM Performer [AFB type]. No carb heat, I live in Tucson, AZ. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

10-17-2008, 01:09 AM	#8
Arekusu Registered User Join Date: Mar 2008 Location: Arlington, Va. Posts: 335	Re: 292 L6 carb. questions Thanks everyone for helping me out. Here in New Mexico it does get cold just later and for not at long.. (it is a desert. ) If anymore of you L6 guys on here have any ideas for an engine build or recommendations I'm all ears. Thanks again!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.