69-72 Reproduction fenders, both sides - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 10-27-2008, 01:03 PM

I will be pulling these off my truck soon to replace with good originals and don't have the space to keep them around for other future projects. They have never been painted. The gray one just has some primer over the original black coating it was shipped with. The black one is as it came. Both made by Gordon. The truck is normally garaged, and has not been driven in the winter or rainy weather (no wipers installed). $75 each plus the shipping. Greyhound should not cost more than about $50, but that is not a quote, just an estimate.

hgs_notes · 10-28-2008, 08:30 AM

bump

49m · 10-28-2008, 11:08 AM

shipping on driver fender to 40075

hgs_notes · 10-28-2008, 02:58 PM

Quote:

Originally Posted by 49m

shipping on driver fender to 40075

Greyhound to Louisville is about $50. DHL is over $82.

hgs_notes · 10-30-2008, 05:47 PM

Bump again

VA72C10 · 10-30-2008, 05:49 PM

How much for both shipped to 23112 (Greyhound to Richmond, VA)

hgs_notes · 10-30-2008, 06:08 PM

Quote:

Originally Posted by VA72C10

How much for both shipped to 23112 (Greyhound to Richmond, VA)

Surprisingly, its not much more than for a single fender. If I strap them together as a single package shipping by greyhound to Richmond is about $70.

VA72C10 · 10-30-2008, 06:38 PM

Thanks for checking but i am going to pass...

AGRV8D · 10-31-2008, 11:49 AM

how is the fit and finish on them?

hgs_notes · 10-31-2008, 12:13 PM

Quote:

Originally Posted by AGRV8D

how is the fit and finish on them?

The finish was good. Fit is about as expected according to every post I've ever seen concerning repro parts. The only problem area is where they meet the grill, there is more gap than expected. It could be filled easily enough.

Ole69chev · 10-31-2008, 05:38 PM

How about both to 48809, very interested. Thank you.

hgs_notes · 10-31-2008, 05:58 PM

Quote:

Originally Posted by Ole69chev

How about both to 48809, very interested. Thank you.

Shipping for both is $70 through greyhound to Grand Rapids, MI. I was just out there last week. Beautiful area.

hgs_notes · 11-03-2008, 11:36 AM

bump

hgs_notes · 11-08-2008, 12:59 AM

How about $200 shipped for the pair, via greyhound?

8mpg · 11-08-2008, 05:10 PM

$150 shipped to 76092?

hgs_notes · 11-08-2008, 06:21 PM

Quote:

Originally Posted by 8mpg

$150 shipped to 76092?

I can understanding wanting to get the best deal possible, but come on. Shipping alone is $70.

$200 is the lowest I'll go with shipping.

8mpg · 11-08-2008, 11:41 PM

Quote:

Originally Posted by hgs_notes

I can understanding wanting to get the best deal possible, but come on. Shipping alone is $70.

$200 is the lowest I'll go with shipping.

Have you ever shipped with Greyhound? The last time I had a hood/front bumper shipped, they really screwed up the hood. All four corners of the hood were scraped down into the fiberglass, front bumper had the plastic corner bent... They were packaged pretty well. I want to say they wrapped it in 1/8" foam (3 layers), then 2 layers of big bubble wrap. They managed to screw it up. I want to say the hood was dragged across concrete, possibly because it was to heavy.

hgs_notes · 11-09-2008, 09:09 AM

Quote:

Originally Posted by 8mpg

Have you ever shipped with Greyhound? The last time I had a hood/front bumper shipped, they really screwed up the hood. All four corners of the hood were scraped down into the fiberglass, front bumper had the plastic corner bent... They were packaged pretty well. I want to say they wrapped it in 1/8" foam (3 layers), then 2 layers of big bubble wrap. They managed to screw it up. I want to say the hood was dragged across concrete, possibly because it was to heavy.

I've used greyhound 3 times so far with no problems. A hood is hard to to move with one person because of it's size, it probably should have gone freight. Fenders can be easily handled and are not much bigger than typical luggage. Shipping a fender by fedex/ups is about $85 for each fender because of the dimensions, which is more than the cost of the fender.

If anyone requests that something be shipped by a certain carrier and they are willing to pay for it, I'll happily go that route. And if I can't sell them for what I think they are worth, I'll stuff them in the rafters for later use or sale.

10-27-2008, 01:03 PM	#1
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	69-72 Reproduction fenders, both sides I will be pulling these off my truck soon to replace with good originals and don't have the space to keep them around for other future projects. They have never been painted. The gray one just has some primer over the original black coating it was shipped with. The black one is as it came. Both made by Gordon. The truck is normally garaged, and has not been driven in the winter or rainy weather (no wipers installed). $75 each plus the shipping. Greyhound should not cost more than about $50, but that is not a quote, just an estimate. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 10-27-2008 at 01:05 PM.

10-28-2008, 08:30 AM	#2
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	Re: 69-72 Reproduction fenders, both sides bump __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

10-28-2008, 11:08 AM	#3
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: 69-72 Reproduction fenders, both sides shipping on driver fender to 40075 __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

10-30-2008, 05:47 PM	#5
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	Re: 69-72 Reproduction fenders, both sides Bump again __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

10-30-2008, 05:49 PM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 69-72 Reproduction fenders, both sides How much for both shipped to 23112 (Greyhound to Richmond, VA) __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-30-2008, 06:38 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 69-72 Reproduction fenders, both sides Thanks for checking but i am going to pass... __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-31-2008, 11:49 AM	#9
AGRV8D Regular Confuser Join Date: Aug 2005 Location: Highlands, Texas Posts: 197	Re: 69-72 Reproduction fenders, both sides how is the fit and finish on them? __________________ My Stuff Surgeon General never said anything about smokin' Fords. Build Thread

10-31-2008, 05:38 PM	#11
Ole69chev Registered User Join Date: Oct 2008 Location: Grandrapids, MI Posts: 35	Re: 69-72 Reproduction fenders, both sides How about both to 48809, very interested. Thank you.

11-03-2008, 11:36 AM	#13
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	Re: 69-72 Reproduction fenders, both sides bump __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-08-2008, 12:59 AM	#14
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	Re: 69-72 Reproduction fenders, both sides How about $200 shipped for the pair, via greyhound? __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-08-2008, 05:10 PM	#15
8mpg Registered User Join Date: Aug 2008 Location: DFW, Texas Posts: 389	Re: 69-72 Reproduction fenders, both sides $150 shipped to 76092?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.