67-72 stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

'71k-10 · 02-23-2003, 01:02 AM

I recently bought a 1971 stepside 4x4 that is is great condition. It currently has a Chevy 350 and a rebuilt automatic trans. I am considering installing a 4'' lift and 33'' tires. Does any one else have stepside with this combo or just suggestions or advice. (type of lift, shocks, tires, blocks/rear leafs) Thanks

Mudder · 02-23-2003, 03:33 AM

A 4" and 33's will work fine. Blocks are ok in the rear if you dont go over 4 inches. Lots of tires out there to choose from. Depends on what ya are going to be doing with your truck.

teeitup · 02-23-2003, 11:13 AM

I put a 2 inch tuff country block rear, new spring front on mine. Have 33 x 12.50's on it. I know its not a 4 inch like you asked but just letting you know. Good luck and WELCOME Randy

'71k-10 · 02-23-2003, 02:54 PM

Thanks guys for the input. Any info is great since i am new at the whole truck thing. I will be some on- road driving to school and around town but also off- roading in mild rocks and trails.

02-23-2003, 01:02 AM	#1
'71k-10 Registered User Join Date: Feb 2003 Location: California Posts: 73	67-72 stepside I recently bought a 1971 stepside 4x4 that is is great condition. It currently has a Chevy 350 and a rebuilt automatic trans. I am considering installing a 4'' lift and 33'' tires. Does any one else have stepside with this combo or just suggestions or advice. (type of lift, shocks, tires, blocks/rear leafs) Thanks

02-23-2003, 11:13 AM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I put a 2 inch tuff country block rear, new spring front on mine. Have 33 x 12.50's on it. I know its not a 4 inch like you asked but just letting you know. Good luck and WELCOME Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-23-2003, 02:54 PM	#4
'71k-10 Registered User Join Date: Feb 2003 Location: California Posts: 73	Thanks guys for the input. Any info is great since i am new at the whole truck thing. I will be some on- road driving to school and around town but also off- roading in mild rocks and trails. __________________ 1971 chevy stepside-350 bored 30 over, holley carb, headers,weiland intake, 3 angle valve job-4" tuff country lift with ORD shackle flip, ORD HD front shackles, 33x12.50x15 mastercraft M/T-Th-350 automatic. Primer grey.

02-23-2003, 03:33 AM	#2
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	A 4" and 33's will work fine. Blocks are ok in the rear if you dont go over 4 inches. Lots of tires out there to choose from. Depends on what ya are going to be doing with your truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.