TV Cable

[6772owner]

So I have been consumed by this LT1 swap and I am getting to the final stages, but have run into a slight snag..... I purchased the Lokar throttle cable, kick down (TV) cable and bracket, and installed them, my question is has anyone else used this set-up on an LT1/700R4? I am questioning the operation of the cable because when I set it for WOT, there is excessive play at the idle position? I had considered redrilling the arm they add to the throttle, but thought I would ask first. Thanks

[leddzepp]

www.bowtieoverdrives.com has some excellent info on how to set up your TV cable

[6772owner]

Thank you very much, I checked out the site and read a ton of info, called them and they were very helpful. I HIGHLY receommend them to anyone else as well.

Thanks Again

[Hart_Rod]

I had that set up on my 48 and never had any issues with it.

[6772owner]

Hart_Rod that is a sweet ride! Thanks for the inout, I was a little scared of it at first LOL

[tphsmith]

I see you have a vacuum line with the one way valves on the line from your opti spark distributor, is your motor a 94? and can someone tell me if a 94 has a vacuum line from the opti spark distributor that connects to the intake, like in the picture? on the LT motors

[Hart_Rod]

Originally Posted by tphsmith

I see you have a vacuum line with the one way valves on the line from your opti spark distributor, is your motor a 94? and can someone tell me if a 94 has a vacuum line from the opti spark distributor that connects to the intake, like in the picture? on the LT motors

Check these sites:

http://www.fierolt1.com/lt1_95_up_OptiReplace.htm

http://www.fierolt1.com/top-end.htm

http://www.fierolt1.com/bottom-end.htm

[tphsmith]

thanks Hart_rod

[6772owner]

My LT1 is from a 96' Camaro, I think the vented opti-spark didnt start til 95', if memory serves me correct.