Help with exaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*ksjh1316* · 11-26-2008, 10:59 AM

Alright it is time to but some exaust on the truck but I can't figure out which one to get. I have a 67 chevy short frame with a 350 and a stock manifolds. What I am looking ofr is a complete syletem that is bolt on I have seen some on Jegs and Summit as well as LMC. Any one have any luck with these or similar systems. I am looking for easy to install with decent preformance and not too loud. Any suggestions are welcome

gcburdic · 11-26-2008, 11:13 AM

This is what I did....I ordered flow master 40's, an h-pipe setup, adjusting couplers, and some turn downs.....had to do a little welding....but it sounds oh so good!!!

big_al_71 · 11-26-2008, 11:36 AM

I went to a local muffler shop I had Dynomax installed and for $425.00 completeed job it was a heck of a deal and it sounds just right.

cdowns · 11-26-2008, 11:59 AM

i've used the lmc kit it was good quality easy to install and lasted well also used a system from jcwhitney that i believe was the same as the lmc kit both kits i went with the turbo mufflers

glock35ipsc · 11-26-2008, 12:25 PM

Quote:

Originally Posted by cdowns

i've used the lmc kit it was good quality easy to install and lasted well also used a system from jcwhitney that i believe was the same as the lmc kit both kits i went with the turbo mufflers

I used the same kit from LMC and it installed very easy and fit good. The JC Whitney is indeed from the same manufacturer.

11-26-2008, 10:59 AM	#1
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Help with exaust Alright it is time to but some exaust on the truck but I can't figure out which one to get. I have a 67 chevy short frame with a 350 and a stock manifolds. What I am looking ofr is a complete syletem that is bolt on I have seen some on Jegs and Summit as well as LMC. Any one have any luck with these or similar systems. I am looking for easy to install with decent preformance and not too loud. Any suggestions are welcome

11-26-2008, 11:13 AM	#2
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Help with exaust This is what I did....I ordered flow master 40's, an h-pipe setup, adjusting couplers, and some turn downs.....had to do a little welding....but it sounds oh so good!!! Attached Images __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

11-26-2008, 11:36 AM	#3
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Help with exaust I went to a local muffler shop I had Dynomax installed and for $425.00 completeed job it was a heck of a deal and it sounds just right. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-26-2008, 11:59 AM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Help with exaust i've used the lmc kit it was good quality easy to install and lasted well also used a system from jcwhitney that i believe was the same as the lmc kit both kits i went with the turbo mufflers __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.