Door hinge slop remedy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jeep & GMC · 12-26-2008, 12:19 PM

There are two bushings and one pin for each hinge (two per door). In each hinge, when the door is off, there are a total of four holes. Two on the cab, two on the door. From what I understand, it was the holes that don't have bushings that were bad. Anyway, it sounds a lot easier than taking the hinges completely off.

robin58 · 12-26-2008, 12:43 PM

Quote:

Originally Posted by Jeep & GMC

From what I understand, it was the holes that don't have bushings that were bad.

There should be bushings in all the holes. If there aren't then they've worn away which is what caused the door to sag.

http://www.bodyshopzone.com/archives...replace_1.html

12-26-2008, 12:19 PM	#1
Jeep & GMC Registered User Join Date: Aug 2007 Location: Montrose,CO Posts: 172	Re: Door hinge slop remedy There are two bushings and one pin for each hinge (two per door). In each hinge, when the door is off, there are a total of four holes. Two on the cab, two on the door. From what I understand, it was the holes that don't have bushings that were bad. Anyway, it sounds a lot easier than taking the hinges completely off. __________________ '97 Chevy z71 starline westerner conversion partially removed.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.