Blazer experts/Tube coming up by gas tube in bed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Reumster · 03-05-2003, 01:22 PM

Can I remove it?? I want to eliminate it.

JimKshortstep4x4 · 03-05-2003, 01:45 PM

I guess that I would not remove it. It is part of your vent/vapor recovery system and it is there to route vapors to your canister.

If you do decide to remove it, you will need to address the lines from the tank and canister, especially the tank because you may have a gasoline leak caused by the open lines.

jim

tom hand · 03-05-2003, 02:22 PM

If it's the tube I am thinking of, it is simply a vent tube for fillling up the tank. If you remove it it will take you forever to pump gas in the tank without the pump cutting off

bouncytruck · 03-05-2003, 02:34 PM

I agree with tom hand. Why would you want to remove it anyway?

Reumster · 03-06-2003, 01:27 AM

When pumping gas the nozzle shuts off anyway if you stick it to far in. I don't have the charcoal canister on my blazer anyway. This is why I want to address the issue, I'm thinking it's effecting my gas milage. Do trucks have this? And if not what if all these guys are adding blazer tanks? Somethings got to give.

Reumster · 03-06-2003, 12:10 PM

TTT

tom hand · 03-06-2003, 02:22 PM

I don't think it is effecting you gas mileage unless it is leaking gas on the ground, but I think if you remove it you'll be looking at some 30 minute fill-ups...if you don't think so remove it and plug it and see what happens

Andy4639 · 03-07-2003, 09:38 AM

Reumster,

First off I don't know of anyway it can effect your fuel milage in less it's leaking quit a bit, and if thats the case I would have it fixed. Trucks do have the vent hose just not the tube, the gas tank in the trucks run a vent line up through the cab roof.
Now if you want to remove the tube, that could be done as long as you reroute the gas hose so that it will vent. The only problem with this is if it is below the tank it's going to fill up with gas sooner or later and start draining the tank. You may be able to put it inside the sheet metal cover that covers the filler tube up if you wanted hid.
I would suggest getting under the blazer and see where it goes and how it's hooked up to the tank, and go from there.

03-05-2003, 01:22 PM	#1
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	Blazer experts/Tube coming up by gas tube in bed? Can I remove it?? I want to eliminate it. __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

03-05-2003, 02:22 PM	#3
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	If it's the tube I am thinking of, it is simply a vent tube for fillling up the tank. If you remove it it will take you forever to pump gas in the tank without the pump cutting off __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

03-05-2003, 02:34 PM	#4
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	I agree with tom hand. Why would you want to remove it anyway? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-06-2003, 01:27 AM	#5
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	When pumping gas the nozzle shuts off anyway if you stick it to far in. I don't have the charcoal canister on my blazer anyway. This is why I want to address the issue, I'm thinking it's effecting my gas milage. Do trucks have this? And if not what if all these guys are adding blazer tanks? Somethings got to give. __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

03-06-2003, 12:10 PM	#6
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	TTT __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

03-05-2003, 01:45 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I guess that I would not remove it. It is part of your vent/vapor recovery system and it is there to route vapors to your canister. If you do decide to remove it, you will need to address the lines from the tank and canister, especially the tank because you may have a gasoline leak caused by the open lines. jim

03-06-2003, 02:22 PM	#7
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	I don't think it is effecting you gas mileage unless it is leaking gas on the ground, but I think if you remove it you'll be looking at some 30 minute fill-ups...if you don't think so remove it and plug it and see what happens __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

03-07-2003, 09:38 AM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	opitions Reumster, First off I don't know of anyway it can effect your fuel milage in less it's leaking quit a bit, and if thats the case I would have it fixed. Trucks do have the vent hose just not the tube, the gas tank in the trucks run a vent line up through the cab roof. Now if you want to remove the tube, that could be done as long as you reroute the gas hose so that it will vent. The only problem with this is if it is below the tank it's going to fill up with gas sooner or later and start draining the tank. You may be able to put it inside the sheet metal cover that covers the filler tube up if you wanted hid. I would suggest getting under the blazer and see where it goes and how it's hooked up to the tank, and go from there. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.