Post Pics of your Static Drops!!

[endlessearth]

Bad ass!

[Monte's62]

wow!!! Got cubbage???

[contagious102]

Bigger is better.!!! Never enough. Drove it in the local Christmas Parade last weekend with my Daughter.!!

[chevyrestoguy]

Here's mine, still currently under construction.
The front suspension and rear axle is all '79 Chevy 1/2 ton.
Front: Belltech spindles, 1 coil cut, 2" chassis "Z", wheelbase stretched 1" to center the front wheels in the fender openings, lower control arms moved fwd .75 (my mod). Total drop is 7".
Rear: 5" drop coils, 2" block, ECE Super Track Bar, ECE shock relocators, frame is notched, forward trailing arm brackets flipped. Total drop is 7"
Wheels/tires: '60s vintage ET Supers, 15x6 front/15x8.5 rear (3.0" backspace). 215/60-15 front, 265/70-15 rear.

[Evoracer]

Bump...

[64nlo]

I really like this thread. old school drop.

[rustbucket66]

My 66. 2 1/2" drop spindles and 2" drop springs in the front, and 4" drop springs in the rear.

[Slambone]

My truck has CPP 3" lowered springs which I cut a coil and a half off. The rear has CPP 5" lowered springs with 2" blocks as well. From what I can tell I have the 5/7 drop.

[Fastest32]

Originally Posted by Slambone

My truck has CPP 3" lowered springs which I cut a coil and a half off. The rear has CPP 5" lowered springs with 2" blocks as well. From what I can tell I have the 5/7 drop.

Tires and wheels look perfect. What size?

[Slambone]

Thanks! They're 225/70/15's. I'm also using 2"wheel spacers to push the tires out closer to the fenders

[Dubnova]

Originally Posted by Slambone

My truck has CPP 3" lowered springs which I cut a coil and a half off. The rear has CPP 5" lowered springs with 2" blocks as well. From what I can tell I have the 5/7 drop.

Perfect ....You nailed it!

[Fastest32]

Good to know.

[64nlo]

the Dyanamat under the hood is a good idea. like.

[willyp]

Saturday night.

[Layne]

Very nice.

[rcg66]

Just got it out after a long, cold winter. 2/4 drop using lowered coil springs.

[CPO1]

Looks good.

[4mulaSvaliant]

5" drop springs out back, 2 1/2" drop spindles and 2" drop springs in the front.
Other than a stiff ride in the rear, its great. I plan to keep th rear springs since I use it as a truck and haul stuff still. If anything I may throw a bit of weight back there to soften the ride a bit. Ill likely be putting in at least a 1" block in the rear as well. I like the rake, but its just a bit much.

[lobuck64]

Did 3.5 front springs used rear springs for an a-body adjustable track bar rides good

[1stGrumpy]

Front has '85 crossmember swap with 2 1/2" drop spindles and 2" drop springs. Rear has '70 rear axle swap with Jeep Wrangler coils and 1" block.

[sags]

Previous owner had cut some coils (not sure how much) on front and rear. Just added 2.5 inch drop spindles. Front is way low - like an inch off the bumpstops. Bottoms out and tires rub when turning (but just barely). For those that said they cut them off, what shocks did you use? Also, I am taking suggestions for what size drop coils for the rear. I am thinking 3".

[Texas1963]

Originally Posted by sags

Previous owner had cut some coils (not sure how much) on front and rear. Just added 2.5 inch drop spindles. Front is way low - like an inch off the bumpstops. Bottoms out and tires rub when turning (but just barely). For those that said they cut them off, what shocks did you use? Also, I am taking suggestions for what size drop coils for the rear. I am thinking 3".

I put the 5 inch from CPP on the rear and It looks an drives good no c notch, with adjustable track bar and spings with re-locator kit.

[low6four]

Camaro sub frame front end (4 inch drop). CPP 5" drop coils for the rear.

[SnS C10]

Looks sweet low6four

[Texas1963]

CPP 3/5 with 1 coil cut up front. Adjustable track bar and rear shock relocation kit. After the 1 coil removal up front she was resting on rubber stops so out the stops came. She rides good and I might remove the front stop perch for some more travel.