''Project '64 SYT Super Yenko Truck" - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jgh64pkup · 04-29-2009, 12:14 PM

thats the only spot they would fit
its really just a toy to play around with
and my school truck

dolphman88 · 04-29-2009, 05:14 PM

i hear ya. lets see the vid of u roastin off those old slicks

NF65Fleetside · 04-30-2009, 11:53 AM

If you stick with the Yenko scheme thats going to be one of a kind! definetly original

jgh64pkup · 04-30-2009, 03:29 PM

i ended up getting rid of the slicks when i got the et streets
so i will do a burout with some radials i need roll control

jgh64pkup · 04-30-2009, 03:30 PM

Quote:

Originally Posted by NF65Fleetside

If you stick with the Yenko scheme thats going to be one of a kind! definetly original

thanks
its going to be a white yenko stripe over sunburst orange

jgh64pkup · 05-03-2009, 01:26 PM

alright heres the pics of the interior
im going to have to modify the kick panels if i decide to put a roll cage in it
im thinking just a 6 point bar

jgh64pkup · 05-03-2009, 01:28 PM

does the front o fthe truck look lower to you
because i cut a coil off of the front coils
i just forgot to mention it

jgh64pkup · 05-06-2009, 08:10 AM

im pulling the doors off my truck to sand them down and primer
i will post some pics later

the lights · 05-22-2009, 06:04 PM

looking good nice work on the fuel cell

jgh64pkup · 05-22-2009, 06:38 PM

thanks i still have to some more prep work and paint it
it will stay like that until i get unlazy and ready to paint

**Captainfab** · 05-23-2009, 01:13 AM

That fuel cell mount looks pretty stout. Are you planning on mounting the pump right there? Might be tempting for some people if you know what I mean.

jgh64pkup · 05-23-2009, 03:26 PM

no i dont guess i know what you mean
what do you mean

Alan's Classic · 05-23-2009, 03:41 PM

Nice work

I have a question. Is the tank removeable from the bottom? I can't tell from the pics if your cage is welded or bolted. If you had to service the tank the bed will have to come off. Just thinking ahead.

**Captainfab** · 05-24-2009, 12:03 AM

Quote:

Originally Posted by jgh64pkup

no i dont guess i know what you mean
what do you mean

What I meant was that someone might help themself to your pump, but it sounds like you'll have it behind a roll pan.

joe231 · 05-25-2009, 10:30 PM

I say go orange on the wheels if you are going to run trim rings, and keep them black if not...
Looking good!

**Captainfab** · 05-26-2009, 12:07 AM

I would say orange wheels with the center cap just like you have it, and trim rings. Orange without trim rings might look good too.....just not sure on that.

jgh64pkup · 05-26-2009, 08:57 AM

Quote:

Originally Posted by joe231

I say go orange on the wheels if you are going to run trim rings, and keep them black if not...
Looking good!

Quote:

Originally Posted by Captainfab

I would say orange wheels with the center cap just like you have it, and trim rings. Orange without trim rings might look good too.....just not sure on that.

thanks
i was thinking no trim rings with the orange do you think it will look better with trim rings
and im keeping the black center caps any way i go with the wheels

joe231 · 05-26-2009, 09:30 AM

I think the trim rings with the orange would just kinda look right...

jgh64pkup · 05-26-2009, 04:14 PM

what style of trim rings

joe231 · 05-26-2009, 05:45 PM

how about some like these?

jgh64pkup · 05-26-2009, 05:57 PM

i have a perfect set(no dings or dents) but they are rusted pretty bad what could i do about that

protrash64 · 05-26-2009, 06:46 PM

Im going to disagree and say the black on the wheels looks tough to me....that burnout vid was lookin' a little scary before it cut out!!!!

jgh64pkup · 05-26-2009, 10:43 PM

DO YOU WANNA SEE ANOTHER ONE!!!!!!
yeah it was scary as hell i got about 4 inches from the wall
ill try again once i get roll control
i tried to tell my dad i needed to put the radials on it
he got it goin pretty good but missed second and it grabed
what kind of roll control should i get i was thinking about a jegs one
its 40 bucks
linky

scotts62 · 05-26-2009, 11:05 PM

Quote:

Originally Posted by jgh64pkup

DO YOU WANNA SEE ANOTHER ONE!!!!!!
yeah it was scary as hell i got about 4 inches from the wall
ill try again once i get roll control
i tried to tell my dad i needed to put the radials on it
he got it goin pretty good but missed second and it grabed
what kind of roll control should i get i was thinking about a jegs one
its 40 bucks
linky

Heck yeah lets see another!!

Buy a good one or you could most definitely be in the wall

1964C10 · 05-29-2009, 01:46 PM

I like the fuel cell! I might have missed it but is that a summit fuel cell? what size? how are you planning on routing the fuel fill?

04-29-2009, 12:14 PM	#1
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 thats the only spot they would fit its really just a toy to play around with and my school truck __________________ Gage 1967 C10 Shortbed Stepside

04-29-2009, 05:14 PM	#2
dolphman88 DDOV Join Date: Sep 2008 Location: North Wilkesboro, NC Posts: 210	Re: my 64 i hear ya. lets see the vid of u roastin off those old slicks __________________ If you don't like the way I drive, stay off the sidewalk http://67-72chevytrucks.com/vboard/s...d.php?t=317070 The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?

04-30-2009, 11:53 AM	#3
NF65Fleetside Registered User Join Date: Feb 2007 Location: Los Angeles Posts: 674	Re: my 64 If you stick with the Yenko scheme thats going to be one of a kind! definetly original

04-30-2009, 03:29 PM	#4
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 i ended up getting rid of the slicks when i got the et streets so i will do a burout with some radials i need roll control __________________ Gage 1967 C10 Shortbed Stepside

05-03-2009, 01:26 PM	#6
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 alright heres the pics of the interior im going to have to modify the kick panels if i decide to put a roll cage in it im thinking just a 6 point bar Attached Images __________________ Gage 1967 C10 Shortbed Stepside

05-03-2009, 01:28 PM	#7
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 does the front o fthe truck look lower to you because i cut a coil off of the front coils i just forgot to mention it Attached Images __________________ Gage 1967 C10 Shortbed Stepside

05-06-2009, 08:10 AM	#8
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 im pulling the doors off my truck to sand them down and primer i will post some pics later __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 05-06-2009 at 08:10 AM.

05-22-2009, 06:04 PM	#9
the lights Registered User Join Date: Dec 2008 Location: turlock CA Posts: 98	Re: my 64 looking good nice work on the fuel cell

05-22-2009, 06:38 PM	#10
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 thanks i still have to some more prep work and paint it it will stay like that until i get unlazy and ready to paint __________________ Gage 1967 C10 Shortbed Stepside

05-23-2009, 01:13 AM	#11
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: my 64 That fuel cell mount looks pretty stout. Are you planning on mounting the pump right there? Might be tempting for some people if you know what I mean. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-23-2009, 03:26 PM	#12
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 no i dont guess i know what you mean what do you mean __________________ Gage 1967 C10 Shortbed Stepside

05-23-2009, 03:41 PM	#13
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: my 64 Nice work I have a question. Is the tank removeable from the bottom? I can't tell from the pics if your cage is welded or bolted. If you had to service the tank the bed will have to come off. Just thinking ahead. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

05-25-2009, 10:30 PM	#15
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: my 64 I say go orange on the wheels if you are going to run trim rings, and keep them black if not... Looking good! __________________ *CHEVY ONLY*

05-26-2009, 12:07 AM	#16
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: my 64 I would say orange wheels with the center cap just like you have it, and trim rings. Orange without trim rings might look good too.....just not sure on that. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-26-2009, 09:30 AM	#18
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: my 64 I think the trim rings with the orange would just kinda look right... __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

05-26-2009, 04:14 PM	#19
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 what style of trim rings __________________ Gage 1967 C10 Shortbed Stepside

05-26-2009, 05:45 PM	#20
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: my 64 how about some like these? __________________ *CHEVY ONLY* Last edited by joe231; 05-26-2009 at 05:46 PM.

05-26-2009, 05:57 PM	#21
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 i have a perfect set(no dings or dents) but they are rusted pretty bad what could i do about that __________________ Gage 1967 C10 Shortbed Stepside

05-26-2009, 06:46 PM	#22
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: my 64 Im going to disagree and say the black on the wheels looks tough to me....that burnout vid was lookin' a little scary before it cut out!!!! __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device Last edited by protrash64; 05-26-2009 at 06:46 PM.

05-26-2009, 10:43 PM	#23
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 DO YOU WANNA SEE ANOTHER ONE!!!!!! yeah it was scary as hell i got about 4 inches from the wall ill try again once i get roll control i tried to tell my dad i needed to put the radials on it he got it goin pretty good but missed second and it grabed what kind of roll control should i get i was thinking about a jegs one its 40 bucks linky __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 05-26-2009 at 10:44 PM.

05-29-2009, 01:46 PM	#25
1964C10 Registered User Join Date: Mar 2008 Location: San Marcos, CA Posts: 578	Re: my 64 I like the fuel cell! I might have missed it but is that a summit fuel cell? what size? how are you planning on routing the fuel fill? __________________ 1964 Fleetside LWB 1995 Yellow Mustang convertible 1996 Camaro Z28 My build thread Looking for help on completing the Disc Brake Upgrade Reference Thread If you didn't build it, you don't really own it

Register or Log In To remove these advertisements.