I went 9.82 in the 1/4 YeeHaw - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kwhite4 · 03-01-2009, 09:14 PM

Me and the wife took a trip to the strip Saturday hoping to get ready for Pinks at the end of the month and run the beast in 1/4. So far all my passes were 1/8 mile so I had no idea what to expect but we made our best pass in the 1/8 and we ran 9.82 in the 1/4 .
I caught myself shutting down at the 1/8 so might of been a little better if I can ever get past that.
Dang thing left so hard I broke the shifter knob right off ( by the way because of this I found the shifter knob is not a good place to put the trans brake button).
Anyway I was very excited to say the least and figured I would share.

6.00 1/8
9.82 1/4

Keith

gchemist · 03-01-2009, 09:42 PM

Where is the video???

Nice work.

enaberif · 03-01-2009, 09:47 PM

Wow 9.82 in the 1/4? That smoking fast for a truck.

**americanmusc1e** · 03-01-2009, 11:06 PM

Quote:

Originally Posted by enaberif

Wow 9.82 in the 1/4? That smoking fast for a truck.

big block or small block??????????? more info on the motor and drivetrain

shortbed70 · 03-01-2009, 11:14 PM

Big Big block

Marv D · 03-01-2009, 11:45 PM

Welcome to the world of a NHRA physical for a competition license, a host of SFI updates and a SMILE EAR TO EAR

Congrats,, 9.anything is kicking @$$ in a truck!

Super73 · 03-02-2009, 12:24 AM

That's moving for sure.. Congrats.. What's the 60' on that pass?

enaberif · 03-02-2009, 01:00 AM

Quote:

Originally Posted by americanmusc1e

big block or small block??????????? more info on the motor and drivetrain

Look at his sig :P

bigjimzlll · 03-02-2009, 08:12 PM

6 flat in the 1/8th is haulin for a 9.8....really haulin

djracer · 03-02-2009, 10:13 PM

Sweet! I think you are still letting off. Have you posted pics of the truck? You need to post it on www.dragtruk.com What were the mph's and 60 ft? You need to update your sig.

kwhite4 · 03-02-2009, 11:39 PM

60 Ft was 1.15
1/8 was 6.01 not exactly 6 flat but close enough for me
1/8 mph 109.46
1/4 was 9.82
1/4 mph cant be right reads 108.30 unless you can lose that much by getting off of it to early. Sure seemed like I was flying,
Made 2 other runs one against a camaro in which he left early and I left late but I still caught him and went 10.23 with a 1.4 60ft 103 mph in the 1/4 and I know I got off of it way early on this one and I was in the bad lane .
The third pass the shifter handle departed the shifter and caused me to fall on my face right off the line, so no good info on that one.

Most of this info probably sounds weird but I only have 15 or so passes on me so I am way green yet and the track doesn't have much in the way of shut down room which can be intimidating.

djracer · 03-02-2009, 11:48 PM

That sixty foot sounds too good to be true!

Alex1 · 03-03-2009, 09:29 AM

How's that glide working in such a heavy vehicle?

**americanmusc1e** · 03-03-2009, 12:34 PM

Quote:

Originally Posted by enaberif

Look at his sig :P

sorry, i was so excited i wasn't paying attention

Super73 · 03-03-2009, 01:03 PM

Kwhite,

How big of a verter you running?
What 1st gear is in the glide?
What's the truck weigh?

Cutting a 1.15 60' is pretty darn amazing for an old pick up..

kwhite4 · 03-03-2009, 01:58 PM

It is a Neil chance converter and they set it up as a 5800 stall, I left on the brake with a 4000 rpm chip.
1.80 straight cut gears in glide. The builder said he was a little afraid of the weight of the truck but so far so good.
Truck weight was 3300 with iron 454 , me in it and no cage, I havent weighed it since adding the aluminum head 565 and putting in cage. I also cut everything of no use out ( 2 cross members fenders ect) and truck has ladder bar set up ( had leaf springs GMC).
Motor made 1011 hp at 7400 rpm according to Schmidt racing engines.

Keith

By the way it was a 9.84 not 9.82 oops I will try to scan the slip tonight for all .

Marv D · 03-03-2009, 02:36 PM

I have to agree with Kevin,, the times are a little unusual. My Nova will pull 1.28 sixty's, go 5.9's @ 115 in the 1/8th, and cross at 9.2's @ 144ish.

Now that's a 2900 pound Nova with a lot less HP than you,, but I just went through some timeslips and even 8.90 door cars crossing at 150mph are only pulling 1.2x sixtys.
Please don't misinturpret what I'm saying,, not trying to discredit, disagree or confront anything,, your kicking @$$ for sure. But I think maybe the timers at your track may have some 'issues'. In the end,, the numbers don't matter, keep doing what your doing,, cause you got that thing FLYING!!!

bigjimzlll · 03-03-2009, 03:20 PM

Yea...somethings not quite right. Nothing on the time slip adds up. For a 9.8 1/4 the 660 should be 6.20 or so. For a sub 1.20 sixty the 660 should be 5.30 and 130 mph. I'm sure it hauled azz, just somethings up with the timing equipment.

Super73 · 03-03-2009, 03:28 PM

Marv,

My buddies chassis car runs consistant 9.0x's with low 1.1x's. But I think the car weighs somewhere around 2,700lbs and makes around 750hp. That is going off memory though.

It does seem based on the 60' to 1/8 then 1/4 that it's nosing over and or your on the brakes pretty hard.. Seat time will probably gain you some ET!!

Super73 · 03-03-2009, 03:33 PM

Kwhite,

Dig up some of your more recent 1/8 mile passes and compare the 60's 330 and 1/8 info. I have seen a napkin ruin a timeslip by blowing across the sensors.

AlienYouth · 03-03-2009, 10:31 PM

well, i run the same mph as u in the 1/4! but mines just a few seconds slower

kwhite4 · 03-04-2009, 12:16 AM

Dont know if you will be able to see it but here is the slip and one of the back of the boat before this pass.
Name: DSCF08772.jpg
Views: 474
Size: 43.5 KB

drag_72 · 03-04-2009, 10:36 AM

what gets me is the really really low mph????

anyways hey dj, whats your plans for paint? or you just gonna stay with the ol' hot rod primer? lol i like that look

djracer · 03-04-2009, 04:39 PM

It will probably stay flat black but a smoother more consistant coat for now.

tubbed 68 · 03-06-2009, 12:37 PM

that is amazing 60 ft for anything but us locals who know little river that is all most impossiable they must have really done something amazing to the track i have yet to run on it but a lot of people are saying it is hooking good.

03-01-2009, 09:14 PM	#1
kwhite4 Junior Member Join Date: Oct 2004 Location: Gatesville texas Posts: 180	I went 9.82 in the 1/4 YeeHaw Me and the wife took a trip to the strip Saturday hoping to get ready for Pinks at the end of the month and run the beast in 1/4. So far all my passes were 1/8 mile so I had no idea what to expect but we made our best pass in the 1/8 and we ran 9.82 in the 1/4 . I caught myself shutting down at the 1/8 so might of been a little better if I can ever get past that. Dang thing left so hard I broke the shifter knob right off ( by the way because of this I found the shifter knob is not a good place to put the trans brake button). Anyway I was very excited to say the least and figured I would share. 6.00 1/8 9.82 1/4 Keith __________________ 68 GMC 565 BBC Abruzzi super pro glide 9.85@135.00

03-01-2009, 09:42 PM	#2
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: I went 9.82 in the 1/4 YeeHaw Where is the video??? Nice work. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

03-01-2009, 09:47 PM	#3
enaberif Registered User Join Date: Jan 2009 Location: Calgary, AB Posts: 1,181	Re: I went 9.82 in the 1/4 YeeHaw Wow 9.82 in the 1/4? That smoking fast for a truck.

03-01-2009, 11:14 PM	#5
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: I went 9.82 in the 1/4 YeeHaw Big Big block __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

03-01-2009, 11:45 PM	#6
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: I went 9.82 in the 1/4 YeeHaw Welcome to the world of a NHRA physical for a competition license, a host of SFI updates and a SMILE EAR TO EAR Congrats,, 9.anything is kicking @$$ in a truck! __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

03-02-2009, 12:24 AM	#7
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: I went 9.82 in the 1/4 YeeHaw That's moving for sure.. Congrats.. What's the 60' on that pass? __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

03-02-2009, 08:12 PM	#9
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: I went 9.82 in the 1/4 YeeHaw 6 flat in the 1/8th is haulin for a 9.8....really haulin __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

03-02-2009, 10:13 PM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: I went 9.82 in the 1/4 YeeHaw Sweet! I think you are still letting off. Have you posted pics of the truck? You need to post it on www.dragtruk.com What were the mph's and 60 ft? You need to update your sig. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-02-2009, 11:39 PM	#11
kwhite4 Junior Member Join Date: Oct 2004 Location: Gatesville texas Posts: 180	Re: I went 9.82 in the 1/4 YeeHaw 60 Ft was 1.15 1/8 was 6.01 not exactly 6 flat but close enough for me 1/8 mph 109.46 1/4 was 9.82 1/4 mph cant be right reads 108.30 unless you can lose that much by getting off of it to early. Sure seemed like I was flying, Made 2 other runs one against a camaro in which he left early and I left late but I still caught him and went 10.23 with a 1.4 60ft 103 mph in the 1/4 and I know I got off of it way early on this one and I was in the bad lane . The third pass the shifter handle departed the shifter and caused me to fall on my face right off the line, so no good info on that one. Most of this info probably sounds weird but I only have 15 or so passes on me so I am way green yet and the track doesn't have much in the way of shut down room which can be intimidating. __________________ 68 GMC 565 BBC Abruzzi super pro glide 9.85@135.00

03-02-2009, 11:48 PM	#12
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: I went 9.82 in the 1/4 YeeHaw That sixty foot sounds too good to be true! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-03-2009, 09:29 AM	#13
Alex1 Registered User Join Date: Jul 2007 Location: Ottawa Ontario Canada Posts: 1,156	Re: I went 9.82 in the 1/4 YeeHaw How's that glide working in such a heavy vehicle?

03-03-2009, 01:03 PM	#15
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: I went 9.82 in the 1/4 YeeHaw Kwhite, How big of a verter you running? What 1st gear is in the glide? What's the truck weigh? Cutting a 1.15 60' is pretty darn amazing for an old pick up.. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49 Last edited by Super73; 03-03-2009 at 01:03 PM.

03-03-2009, 01:58 PM	#16
kwhite4 Junior Member Join Date: Oct 2004 Location: Gatesville texas Posts: 180	Re: I went 9.82 in the 1/4 YeeHaw It is a Neil chance converter and they set it up as a 5800 stall, I left on the brake with a 4000 rpm chip. 1.80 straight cut gears in glide. The builder said he was a little afraid of the weight of the truck but so far so good. Truck weight was 3300 with iron 454 , me in it and no cage, I havent weighed it since adding the aluminum head 565 and putting in cage. I also cut everything of no use out ( 2 cross members fenders ect) and truck has ladder bar set up ( had leaf springs GMC). Motor made 1011 hp at 7400 rpm according to Schmidt racing engines. Keith By the way it was a 9.84 not 9.82 oops I will try to scan the slip tonight for all . __________________ 68 GMC 565 BBC Abruzzi super pro glide 9.85@135.00 Last edited by kwhite4; 03-03-2009 at 02:00 PM. Reason: oops

03-03-2009, 02:36 PM	#17
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: I went 9.82 in the 1/4 YeeHaw I have to agree with Kevin,, the times are a little unusual. My Nova will pull 1.28 sixty's, go 5.9's @ 115 in the 1/8th, and cross at 9.2's @ 144ish. Now that's a 2900 pound Nova with a lot less HP than you,, but I just went through some timeslips and even 8.90 door cars crossing at 150mph are only pulling 1.2x sixtys. Please don't misinturpret what I'm saying,, not trying to discredit, disagree or confront anything,, your kicking @$$ for sure. But I think maybe the timers at your track may have some 'issues'. In the end,, the numbers don't matter, keep doing what your doing,, cause you got that thing FLYING!!! __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

03-03-2009, 03:20 PM	#18
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: I went 9.82 in the 1/4 YeeHaw Yea...somethings not quite right. Nothing on the time slip adds up. For a 9.8 1/4 the 660 should be 6.20 or so. For a sub 1.20 sixty the 660 should be 5.30 and 130 mph. I'm sure it hauled azz, just somethings up with the timing equipment. __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA



Register or Log In To remove these advertisements.

03-03-2009, 03:28 PM	#19
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: I went 9.82 in the 1/4 YeeHaw Marv, My buddies chassis car runs consistant 9.0x's with low 1.1x's. But I think the car weighs somewhere around 2,700lbs and makes around 750hp. That is going off memory though. It does seem based on the 60' to 1/8 then 1/4 that it's nosing over and or your on the brakes pretty hard.. Seat time will probably gain you some ET!! __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

03-03-2009, 03:33 PM	#20
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: I went 9.82 in the 1/4 YeeHaw Kwhite, Dig up some of your more recent 1/8 mile passes and compare the 60's 330 and 1/8 info. I have seen a napkin ruin a timeslip by blowing across the sensors. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

03-03-2009, 10:31 PM	#21
AlienYouth Registered User Join Date: Apr 2007 Location: Westminster, Maryland Posts: 411	Re: I went 9.82 in the 1/4 YeeHaw well, i run the same mph as u in the 1/4! but mines just a few seconds slower __________________ Picturesss 71 C10 383/TH400 13.65 @ 99... 2.06 60' spinnin :/

03-04-2009, 12:16 AM	#22
kwhite4 Junior Member Join Date: Oct 2004 Location: Gatesville texas Posts: 180	Re: I went 9.82 in the 1/4 YeeHaw Dont know if you will be able to see it but here is the slip and one of the back of the boat before this pass. Attached Images __________________ 68 GMC 565 BBC Abruzzi super pro glide 9.85@135.00

03-04-2009, 10:36 AM	#23
drag_72 Ready to go fast!! Join Date: Aug 2008 Location: Carthage,Mo Posts: 219	Re: I went 9.82 in the 1/4 YeeHaw what gets me is the really really low mph???? anyways hey dj, whats your plans for paint? or you just gonna stay with the ol' hot rod primer? lol i like that look __________________ 454 block .30 forged aluminum pistons steel crank valve job Holley Strip Dominator intake 1030cfm holley carb, 250 plate shot roller rockers Erson Solid cam split duration 307/310. .575/.595 lift milodon oil pan fab. aluminum valve covers 4 bolt main splayed anodized caps all studded

03-04-2009, 04:39 PM	#24
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: I went 9.82 in the 1/4 YeeHaw It will probably stay flat black but a smoother more consistant coat for now. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-06-2009, 12:37 PM	#25
tubbed 68 Registered User Join Date: Sep 2006 Location: US Posts: 46	Re: I went 9.82 in the 1/4 YeeHaw that is amazing 60 ft for anything but us locals who know little river that is all most impossiable they must have really done something amazing to the track i have yet to run on it but a lot of people are saying it is hooking good.

Register or Log In To remove these advertisements.