how to adjust transmission linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

circa55 · 03-15-2009, 09:54 PM

Hey all,

I have a 1972 C10 with a 350 and 3 spd automatic. I cannot shift below drive unless the engine is off and I'm not moving.

Where can I find literature on how to adjust my transmission linkage? I'm assuming that's all I need to do?

PanelDeland · 03-16-2009, 10:14 AM

This will help.

http://67-72chevytrucks.com/vboard/s...d.php?t=215307

There is a list of this type stuff which usually has more info than can be given in a thread,here's the link.

http://67-72chevytrucks.com/vboard/s...d.php?t=157669

circa55 · 03-16-2009, 12:40 PM

Thanks Paul. Looks like some good stuff there, and I will bookmark that one.

Trouble is, mine is an automatic tranny, and I didn't find anything to help me.

tim21391 · 03-16-2009, 01:28 PM

my truck gear shifter wouldnt come out of park..it ende dup being my steering column on the firewall was to tight... so i loosened the bolts and it worked... not sure if its your problem.. just my .02

03-15-2009, 09:54 PM	#1
circa55 Registered User Join Date: Feb 2008 Location: Shelton, CT Posts: 3	how to adjust transmission linkage Hey all, I have a 1972 C10 with a 350 and 3 spd automatic. I cannot shift below drive unless the engine is off and I'm not moving. Where can I find literature on how to adjust my transmission linkage? I'm assuming that's all I need to do?

03-16-2009, 10:14 AM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: how to adjust transmission linkage This will help. http://67-72chevytrucks.com/vboard/s...d.php?t=215307 There is a list of this type stuff which usually has more info than can be given in a thread,here's the link. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

03-16-2009, 12:40 PM	#3
circa55 Registered User Join Date: Feb 2008 Location: Shelton, CT Posts: 3	Re: how to adjust transmission linkage Thanks Paul. Looks like some good stuff there, and I will bookmark that one. Trouble is, mine is an automatic tranny, and I didn't find anything to help me.

03-16-2009, 01:28 PM	#4
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: how to adjust transmission linkage my truck gear shifter wouldnt come out of park..it ende dup being my steering column on the firewall was to tight... so i loosened the bolts and it worked... not sure if its your problem.. just my .02 __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.