pic request. short pump accessory routing and mounting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MarkMark · 03-07-2009, 07:48 PM

Im in the process of changing from a long to a short pump set up. I have everything off, and have the short pump on. I need some help with how all of the accessory brackets mount. And can I use my Power steering pump without the external reservoir from my long pump setup? I will be running power steering, and A/C.

Thanks
-Mark

Longhorn Man · 03-07-2009, 08:25 PM

big block engine?

MarkMark · 03-07-2009, 08:36 PM

Quote:

Originally Posted by Longhorn Man

big block engine?

yes. cant believe I left out that crucial bit of info.

franks72 · 03-07-2009, 09:41 PM

I dont think your going to be able to use the long water pump, power steering pump. If you dont want a reservoir I think your gona have to go with an aftermarket unit. Why not use the factory pump with the reservior? There are always guys selling the brackets and pumps on here..

Longhorn Man · 03-07-2009, 09:44 PM

frank, the stock big block set up on these trucks do NOT have a resevior.
I doubt you can use the assembly you have... be ready to shell out some cash too... this stuff is NOT cheap.

MarkMark · 03-07-2009, 10:12 PM

I have all the short pump brackets, bought them from Leddzepp. The power steering pump i received from him has an external reservoir. I'll take some pics tomorrow.

I just need pics to see how they all mount.

**leddzepp** · 03-08-2009, 10:07 AM

Here you go Mark...hope this helps.

franks72 · 03-08-2009, 11:54 AM

Opps ,forgot to add the word ( external ) in the sentence, if you dont want a (external) resevior... sorry...

MarkMark · 03-08-2009, 01:32 PM

Quote:

Originally Posted by leddzepp

Here you go Mark...hope this helps.

Thanks, That will get me moving forward.

MarkMark · 03-18-2009, 04:58 PM

Im lost as to where the power steering reservoir mounts. Can any one help??

Johns70 · 03-18-2009, 05:30 PM

mounts to the inside of the driver fender towards the front, close too the corner brace

MarkMark · 03-18-2009, 05:40 PM

To a bracket or directly to the fender. I cant seem to find any thing that looks like it will line up with to bolt in.

Johns70 · 03-18-2009, 10:02 PM

the res. should have a braket on it with two holes. on left fender, right by the windshield washer res. there should be one hole and you will have drill the other. hope this helps

**DANTIP** · 03-19-2009, 06:29 AM

Here are some borrowed photos that show the location of the divorced reservoir. As mentioned before there are two welded nuts on the back of the reservoir bracket that accept bolts through the inside of the front fender.

03-07-2009, 07:48 PM	#1
MarkMark Registered User Join Date: Oct 2008 Location: Richmond Hill, GA Posts: 82	pic request. short pump accessory routing and mounting Im in the process of changing from a long to a short pump set up. I have everything off, and have the short pump on. I need some help with how all of the accessory brackets mount. And can I use my Power steering pump without the external reservoir from my long pump setup? I will be running power steering, and A/C. Thanks -Mark

03-07-2009, 08:25 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: pic request. short pump accessory routing and mounting big block engine?

03-07-2009, 09:41 PM	#4
franks72 Junior Member Join Date: Mar 2005 Location: Wilmington DE Posts: 218	Re: pic request. short pump accessory routing and mounting I dont think your going to be able to use the long water pump, power steering pump. If you dont want a reservoir I think your gona have to go with an aftermarket unit. Why not use the factory pump with the reservior? There are always guys selling the brackets and pumps on here.. __________________ 72 cheyenne super BB402 TH400 Air Tack Tilt Posi P/S P/B AM/FM 12.96 @ 101.82 mph 60ft 1.82 12.39 @111.33 With a 180 shot nos 69 Camaro RS http://s94.photobucket.com/albums/l117/fdelcoglin/ email fdelcoglin@hotmail.com

03-07-2009, 09:44 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: pic request. short pump accessory routing and mounting frank, the stock big block set up on these trucks do NOT have a resevior. I doubt you can use the assembly you have... be ready to shell out some cash too... this stuff is NOT cheap.

03-07-2009, 10:12 PM	#6
MarkMark Registered User Join Date: Oct 2008 Location: Richmond Hill, GA Posts: 82	Re: pic request. short pump accessory routing and mounting I have all the short pump brackets, bought them from Leddzepp. The power steering pump i received from him has an external reservoir. I'll take some pics tomorrow. I just need pics to see how they all mount.

03-08-2009, 10:07 AM	#7
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: pic request. short pump accessory routing and mounting Here you go Mark...hope this helps. Attached Images

03-08-2009, 11:54 AM	#8
franks72 Junior Member Join Date: Mar 2005 Location: Wilmington DE Posts: 218	Re: pic request. short pump accessory routing and mounting Opps ,forgot to add the word ( external ) in the sentence, if you dont want a (external) resevior... sorry... __________________ 72 cheyenne super BB402 TH400 Air Tack Tilt Posi P/S P/B AM/FM 12.96 @ 101.82 mph 60ft 1.82 12.39 @111.33 With a 180 shot nos 69 Camaro RS http://s94.photobucket.com/albums/l117/fdelcoglin/ email fdelcoglin@hotmail.com Last edited by franks72; 03-08-2009 at 11:55 AM.

03-18-2009, 04:58 PM	#10
MarkMark Registered User Join Date: Oct 2008 Location: Richmond Hill, GA Posts: 82	Re: pic request. short pump accessory routing and mounting Im lost as to where the power steering reservoir mounts. Can any one help??

03-18-2009, 05:30 PM	#11
Johns70 Registered User Join Date: Dec 2001 Location: Spring Creek, nevada. U.S.A. Posts: 456	Re: pic request. short pump accessory routing and mounting mounts to the inside of the driver fender towards the front, close too the corner brace __________________ 69 chevy short wide box project 70 GMC jimmy project

03-18-2009, 05:40 PM	#12
MarkMark Registered User Join Date: Oct 2008 Location: Richmond Hill, GA Posts: 82	Re: pic request. short pump accessory routing and mounting To a bracket or directly to the fender. I cant seem to find any thing that looks like it will line up with to bolt in.

03-18-2009, 10:02 PM	#13
Johns70 Registered User Join Date: Dec 2001 Location: Spring Creek, nevada. U.S.A. Posts: 456	Re: pic request. short pump accessory routing and mounting the res. should have a braket on it with two holes. on left fender, right by the windshield washer res. there should be one hole and you will have drill the other. hope this helps __________________ 69 chevy short wide box project 70 GMC jimmy project

03-19-2009, 06:29 AM	#14
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,882	Re: pic request. short pump accessory routing and mounting Here are some borrowed photos that show the location of the divorced reservoir. As mentioned before there are two welded nuts on the back of the reservoir bracket that accept bolts through the inside of the front fender. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.