The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical > Truck Audio

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-14-2009, 04:34 PM   #1
travisfraughton
Registered User
 
travisfraughton's Avatar
 
Join Date: Jun 2008
Location: provo, ut
Posts: 69
stereo sit.

ok among a new radiator this summer, and new springs all around, i'm looking at my stereo, which is your typical cd deck and kind of wishing that someone hadn't cut out the original fit, so that i could've gotten a stock looking stereo with a hidden disc changer, buuuuuttt.
that's my situation, anybody know of a good cd deck that will fit and not seem so out of place in my 70?
travisfraughton is offline   Reply With Quote
Old 03-14-2009, 05:05 PM   #2
spinning wheels
Registered User
 
spinning wheels's Avatar
 
Join Date: Sep 2001
Location: Hacienda Heights, California USA
Posts: 474
Re: stereo sit.

Quote:
Originally Posted by travisfraughton View Post
ok among a new radiator this summer, and new springs all around, i'm looking at my stereo, which is your typical cd deck and kind of wishing that someone hadn't cut out the original fit, so that i could've gotten a stock looking stereo with a hidden disc changer, buuuuuttt.
that's my situation, anybody know of a good cd deck that will fit and not seem so out of place in my 70?
I have a Kenwood dual shaft AM/FM cassette receiver, model KRC-2007. As for CD player, you can either install a disk player under the seat or as many are doing now, just run an iPod or satellite receiver (SiriusXM) with a RF signal to your radio.
I have not seen any CD players with dual shafts, that is why most dash panels are cut. There is always the glove box installation, or under the dash installation.
__________________
'72 GMC custom camper 350/350
spinning wheels is offline   Reply With Quote
Old 03-14-2009, 05:35 PM   #3
heavy71chevy
Registered User
 
heavy71chevy's Avatar
 
Join Date: Apr 2007
Location: antreville, south carolina
Posts: 873
Re: stereo sit.

http://www.ikesound.com/kenwood_kdc_bt838u that would look real sweet in a 67-72 and has alot of nice features also I really like this deck http://www.ikesound.com/pyle_plcd45mp
__________________
"Dixie Destroyer"
71 C10 LWB Fleet
Future Blown Prostreet Monster
heavy71chevy is offline   Reply With Quote
Old 03-14-2009, 05:47 PM   #4
travisfraughton
Registered User
 
travisfraughton's Avatar
 
Join Date: Jun 2008
Location: provo, ut
Posts: 69
Re: stereo sit.

oh, i neglected to mention before that the interior, seats and cab, are all hugger orange. so i don't think that i want the typical blue backlit type of deck. an orange backlight? red even might work. black/white might look ok too. i would love to see some pics of others decks they've installed in a 67-72. anyone????
and thanks for all replies, they're appreciated.

Last edited by travisfraughton; 03-14-2009 at 05:48 PM.
travisfraughton is offline   Reply With Quote
Old 03-14-2009, 10:30 PM   #5
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Re: stereo sit.

I have this one in the 71. I have the cd changer under the seat. It lights up green.



CD changer sitting in the passenger side floor.


2 10" subs where the gas tank use to be.


__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 03-15-2009, 12:11 AM   #6
spinning wheels
Registered User
 
spinning wheels's Avatar
 
Join Date: Sep 2001
Location: Hacienda Heights, California USA
Posts: 474
Re: stereo sit.

Andy, where did you put your fuel tank?

Looks like you have spent a lot of time and labor on your truck. Very well done.
__________________
'72 GMC custom camper 350/350
spinning wheels is offline   Reply With Quote
Old 03-15-2009, 12:22 AM   #7
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Re: stereo sit.

Thanks,
I have been working on this since 1986. I moved the tank to the bed since it's a LWB. It sits in the front of the bed, it's something I need to redo but just haven't taken the time to do. I get started on other mods and never seem to get to it.
I want to move it under the bed in the rear but I haven't seen a system yet that I want to use.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 03-15-2009, 07:20 AM   #8
AceX
>130dB Moderator
 
AceX's Avatar
 
Join Date: Aug 2006
Location: Sacramento, CA
Posts: 2,130
Re: stereo sit.

The Pioneer P800 and 880PRS are the absolute perfect unit.

P800 (new)


DEH-880PRS (last year's model...)
__________________
Living Life @ 130dB
LED Tail Light Conversion; How-to

Friend. Father. Brother.
RIP El Jay


-------------------------------------------------------------------------------------------------------------------------
CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.
AceX is offline   Reply With Quote
Old 03-15-2009, 04:13 PM   #9
spinning wheels
Registered User
 
spinning wheels's Avatar
 
Join Date: Sep 2001
Location: Hacienda Heights, California USA
Posts: 474
Re: stereo sit.

AceX, but do these receiver fit in an uncut dash?
__________________
'72 GMC custom camper 350/350
spinning wheels is offline   Reply With Quote
Old 03-15-2009, 11:37 PM   #10
dan42
Registered User
 
dan42's Avatar
 
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
Re: stereo sit.

No - The only ones you can get for uncut dash are the Retrosound ( I have one of them) and Custom Autosound. Both are really inferior units, but you don't have to cut. It better be important to you not to cut. I'm on my second Retrosound unit and am still having problems.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD
Click here to support the board
Philippians 4: 6-7

Last edited by dan42; 03-15-2009 at 11:38 PM.
dan42 is offline   Reply With Quote
Old 03-16-2009, 01:28 AM   #11
spinning wheels
Registered User
 
spinning wheels's Avatar
 
Join Date: Sep 2001
Location: Hacienda Heights, California USA
Posts: 474
Re: stereo sit.

Quote:
Originally Posted by dan42 View Post
No - The only ones you can get for uncut dash are the Retrosound ( I have one of them) and Custom Autosound. Both are really inferior units, but you don't have to cut. It better be important to you not to cut. I'm on my second Retrosound unit and am still having problems.
Dan,

Thanks, I have a Kenwood receiver with the dual shafts that will fit without cutting my dash.

I haven't installed it, I bought it years ago and it is no longer produced.

I need to change my exhaust, cause with my current setup, you can almost hear yourself thinking...... almost
__________________
'72 GMC custom camper 350/350
spinning wheels is offline   Reply With Quote
Old 03-16-2009, 05:33 PM   #12
AceX
>130dB Moderator
 
AceX's Avatar
 
Join Date: Aug 2006
Location: Sacramento, CA
Posts: 2,130
Re: stereo sit.

That Kenwod unit might be able tp provide a decent output signal to an amplifier. It will probably be on the low end of the voltage scale, but it should be able to feed an amp or two with a signal. All this is provided the unit has RCA outputs.

EDIT: sorry, I hadn't gotten it into my head that you DIDN'T have a cut dash. My daddy never dun learned me ta' read good.
__________________
Living Life @ 130dB
LED Tail Light Conversion; How-to

Friend. Father. Brother.
RIP El Jay


-------------------------------------------------------------------------------------------------------------------------
CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

Last edited by AceX; 03-16-2009 at 05:47 PM.
AceX is offline   Reply With Quote
Old 03-17-2009, 07:03 PM   #13
travisfraughton
Registered User
 
travisfraughton's Avatar
 
Join Date: Jun 2008
Location: provo, ut
Posts: 69
Re: stereo sit.

nice responses, i'm still kind of torn up. i guess i should just go shopping one day and see what catches my eye. i like the idea of moving the tank from behind the seat. i'm running some door speakers, and a pair of 8 in truck riders (kenwood if i'm not mistaken.) that will make it pretty loud, but a lil louder wouldn't be bad, (don't tell my wife)
travisfraughton is offline   Reply With Quote
Old 03-18-2009, 04:47 AM   #14
AceX
>130dB Moderator
 
AceX's Avatar
 
Join Date: Aug 2006
Location: Sacramento, CA
Posts: 2,130
Re: stereo sit.

"Quality over Quantity" is phrase best applied to car audio. Possibly more than anything else.

It won't matter how loud it is if it sounds like garbage. When people ask me how loud my system gets (dB) I usually tell them one of three things:

1. Who cares?
2. Its a sound quality system, bot a dB demon...
3. It gets loud enough...

I did eventually get some numbers on it in order to please these people, but to this day, those are my usual responses...
__________________
Living Life @ 130dB
LED Tail Light Conversion; How-to

Friend. Father. Brother.
RIP El Jay


-------------------------------------------------------------------------------------------------------------------------
CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.
AceX is offline   Reply With Quote
Old 03-19-2009, 02:31 PM   #15
travisfraughton
Registered User
 
travisfraughton's Avatar
 
Join Date: Jun 2008
Location: provo, ut
Posts: 69
Re: stereo sit.

true dat ^^^^
travisfraughton is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:36 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com