Live from Belle Rose La - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**regan wilson** · 03-20-2009, 01:04 PM

I finally got me a new computer so i can talk to yall from the track .This is the first of three weeks of racing for me . We have the Houston Nats next week and then the Ennis divisional the following week . This track is great with the exception that there is always a headwind . If someone would turn the wind off the old blue truck would haul ass . I went 10.877 @ 147.50 this morning with a 15 mph headwind. Now if I can just cut a light ! I'm kinda rusty since i havent raced since october .

bigjimzlll · 03-20-2009, 02:25 PM

Good luck Ryan. How many do you hold in SST?

**regan wilson** · 03-23-2009, 07:03 AM

Well it wasnt a good trip ! First I got showered by rocks from the water box that resulted in a busted windshield and a paint chip on my hood . One of my buddies got a guy to come out and repair the windshield so I thought it was getting better . NOT ! Saturday I was on my way to the lanes to get a time run and I heard a funny noise . Well that noise turned out to be a roller lifter squeaking . It went from squeaking to broken in an instant . So I didnt get to race . Now instead of getting ready for the Houston nats I will be pulling the motor to inspect the damage and hopefully get to make our first divisional race in Ennis in two weeks . Jim I usually try to hold .02 becuase you have to be able to get there . You can turn an .88 into a .90 but you cant turn a .92 into a .90 ....

djracer · 03-25-2009, 07:24 AM

what lifters are you runing? How many passes did they have on them?

**regan wilson** · 03-25-2009, 01:29 PM

They were 904 Crowers and they had about 150 runs on them . Alot of people are getting 300 runs out of them so I was going to try to get 200 . I have had the best luck out of Crower so I'm not scared to put the same thing back in it .

djracer · 03-25-2009, 10:37 PM

are they the ones with high pressure pin oiling? I have heard that those and the isky red zones are the best till you get to the jesels.

**regan wilson** · 03-26-2009, 08:04 AM

Yes they call them Hippo's . I broke one of the Red Zone Isky's after about 20 passes but I have three or four sets of Crowers on the shelf that I never had a problem with . Anthing can break , in my opinion and from what I have heard from engine builders Crower and Isky are about the same . I would love to have some Jesels but those things are way too pricey .

Anyway on another note ! Since I was already going to be off racing I have been working on my motor . I took the block , cam , And rods & pistons to my machinist yesterday . After spending all afternoon with him we saved my cam and the rod I was worried about . Even though a friend of mine offered me his car for the Tx Motorplex divisional it looks like I will get to run the truck .

djracer · 03-26-2009, 04:54 PM

cool.

aggie91 · 04-13-2009, 03:38 PM

Regan

Did you make it to the divisional? I talked to David Hale this weekend, he wasn't sure if you motor was back together or not. Said he was shooting to get his back together this year...

72 SUPER10 · 04-13-2009, 06:30 PM

Reagan , is the two four set up faster for you than a single set up, vince.

72 SUPER10 · 04-13-2009, 06:31 PM

Regan , is the two four set up faster for you than a single set up, vince.

**regan wilson** · 04-15-2009, 12:19 PM

Quote:

Originally Posted by aggie91

Regan

Did you make it to the divisional? I talked to David Hale this weekend, he wasn't sure if you motor was back together or not. Said he was shooting to get his back together this year...

Yes I got it back together . It seems to be doing ok but I'm never happy when I have to patch one up . It just needs to live for 5 more divisionals . The truck was doing good at Ennis until first round . It spun on the line and coming off the T-Stop and I couldnt run the number.....Argggg

**regan wilson** · 04-15-2009, 12:23 PM

Quote:

Originally Posted by 72 SUPER10

Regan , is the two four set up faster for you than a single set up, vince.

It was one of the best improvements I have ever had . It picked up 2 tenths and 4 or 5 mph on my old 598 . That was changing from the big Brodix single 4 manifold and a 1250 Holley .

72 SUPER10 · 04-15-2009, 04:23 PM

Thats good to know,it makes lots on the big end im sure with them up higher and the cfm there,along with the big motor, ,vince

03-20-2009, 01:04 PM	#1
regan wilson Senior Member Join Date: Mar 2008 Location: tyler texas Posts: 1,532	Live from Belle Rose La I finally got me a new computer so i can talk to yall from the track .This is the first of three weeks of racing for me . We have the Houston Nats next week and then the Ennis divisional the following week . This track is great with the exception that there is always a headwind . If someone would turn the wind off the old blue truck would haul ass . I went 10.877 @ 147.50 this morning with a 15 mph headwind. Now if I can just cut a light ! I'm kinda rusty since i havent raced since october . __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

03-20-2009, 02:25 PM	#2
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: Live from Belle Rose La Good luck Ryan. How many do you hold in SST? __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

03-23-2009, 07:03 AM	#3
regan wilson Senior Member Join Date: Mar 2008 Location: tyler texas Posts: 1,532	Re: Live from Belle Rose La Well it wasnt a good trip ! First I got showered by rocks from the water box that resulted in a busted windshield and a paint chip on my hood . One of my buddies got a guy to come out and repair the windshield so I thought it was getting better . NOT ! Saturday I was on my way to the lanes to get a time run and I heard a funny noise . Well that noise turned out to be a roller lifter squeaking . It went from squeaking to broken in an instant . So I didnt get to race . Now instead of getting ready for the Houston nats I will be pulling the motor to inspect the damage and hopefully get to make our first divisional race in Ennis in two weeks . Jim I usually try to hold .02 becuase you have to be able to get there . You can turn an .88 into a .90 but you cant turn a .92 into a .90 .... __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

03-25-2009, 07:24 AM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Live from Belle Rose La what lifters are you runing? How many passes did they have on them? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-25-2009, 01:29 PM	#5
regan wilson Senior Member Join Date: Mar 2008 Location: tyler texas Posts: 1,532	Re: Live from Belle Rose La They were 904 Crowers and they had about 150 runs on them . Alot of people are getting 300 runs out of them so I was going to try to get 200 . I have had the best luck out of Crower so I'm not scared to put the same thing back in it . __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

03-25-2009, 10:37 PM	#6
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Live from Belle Rose La are they the ones with high pressure pin oiling? I have heard that those and the isky red zones are the best till you get to the jesels. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-26-2009, 08:04 AM	#7
regan wilson Senior Member Join Date: Mar 2008 Location: tyler texas Posts: 1,532	Re: Live from Belle Rose La Yes they call them Hippo's . I broke one of the Red Zone Isky's after about 20 passes but I have three or four sets of Crowers on the shelf that I never had a problem with . Anthing can break , in my opinion and from what I have heard from engine builders Crower and Isky are about the same . I would love to have some Jesels but those things are way too pricey . Anyway on another note ! Since I was already going to be off racing I have been working on my motor . I took the block , cam , And rods & pistons to my machinist yesterday . After spending all afternoon with him we saved my cam and the rod I was worried about . Even though a friend of mine offered me his car for the Tx Motorplex divisional it looks like I will get to run the truck . __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

03-26-2009, 04:54 PM	#8
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Live from Belle Rose La cool. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-13-2009, 03:38 PM	#9
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Live from Belle Rose La Regan Did you make it to the divisional? I talked to David Hale this weekend, he wasn't sure if you motor was back together or not. Said he was shooting to get his back together this year... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

04-13-2009, 06:30 PM	#10
72 SUPER10 Registered User Join Date: Nov 2008 Location: LUCEDALE MS. Posts: 157	Re: Live from Belle Rose La Reagan , is the two four set up faster for you than a single set up, vince.

04-13-2009, 06:31 PM	#11
72 SUPER10 Registered User Join Date: Nov 2008 Location: LUCEDALE MS. Posts: 157	Re: Live from Belle Rose La Regan , is the two four set up faster for you than a single set up, vince.

04-15-2009, 04:23 PM	#14
72 SUPER10 Registered User Join Date: Nov 2008 Location: LUCEDALE MS. Posts: 157	Re: Live from Belle Rose La Thats good to know,it makes lots on the big end im sure with them up higher and the cfm there,along with the big motor, ,vince



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.