***NEED HELP*** CST door emblem location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teamradrz1 · 04-16-2009, 01:42 AM

anyone know where the holes need to be drilled for the CST emblems for a 71 blazer need a measurement from the rear door edge to either the edge of the emblem or the first hole location. NEED ASAP PLEASE!

teamradrz1 · 04-16-2009, 12:02 PM

seriously?!?!
No one has a CST truck and a tape measure?
C'mon guys I really need help on this Paint guys are waiting on this info to drill the holes before they start painting.

CAMVEE · 04-16-2009, 06:16 PM

Hey, I am stripping a 72 CST Blazer for paint, I am wondering how to remove the cst door emblems, is there an easy way? Thanks,,,

Twisted78SS · 04-16-2009, 06:26 PM

Hey teamradrz1,

Drew here. I will stop by Dave's after work and measure a couple of doors. I spoke to Brad and he confirmed as did I that the assembly manual gives some references, but maybe not all. I looked last night at the assembly manual again, and to me it appears that what they list in the picture as reference point #35 is the door center line. They do not list the measurement of it, but from that line they do list the distance for each hole and the hole sizes. Once I get a few measurements from a door today, I will compare them to the assembly manual and update everyone.

Drew

teamradrz1 · 04-16-2009, 09:59 PM

Thanks I have the assembly guide too and wish it were more clear on this stuff I wasn't sure if that was a center line of the door or not.

teamradrz1 · 04-16-2009, 10:01 PM

Quote:

Originally Posted by CAMVEE

Hey, I am stripping a 72 CST Blazer for paint, I am wondering how to remove the cst door emblems, is there an easy way? Thanks,,,

They just pop out with a little force as they do not have back screw downs like most emblems they just have a barbed hole liner that holds the emblems in place.

**too much stuff** · 04-16-2009, 10:27 PM

The emblems should have "barrel clips". If you are careful they should pry off.
Now, from the back of the door, 15 7/16" and 19 1/2" to the centers. I just measured a door i have here that looks correct yet. The door is off a 68 pickup, but i think the emblem location is the same as a blazer. Eric

teamradrz1 · 04-16-2009, 10:46 PM

AWESOME thank you!

04-16-2009, 01:42 AM	#1
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	*NEED HELP* CST door emblem location anyone know where the holes need to be drilled for the CST emblems for a 71 blazer need a measurement from the rear door edge to either the edge of the emblem or the first hole location. NEED ASAP PLEASE! __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4

04-16-2009, 12:02 PM	#2
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	Re: NEED HELP CST door emblem location seriously?!?! No one has a CST truck and a tape measure? C'mon guys I really need help on this Paint guys are waiting on this info to drill the holes before they start painting. __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4 Last edited by teamradrz1; 04-16-2009 at 12:03 PM.

04-16-2009, 06:26 PM	#4
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: NEED HELP CST door emblem location Hey teamradrz1, Drew here. I will stop by Dave's after work and measure a couple of doors. I spoke to Brad and he confirmed as did I that the assembly manual gives some references, but maybe not all. I looked last night at the assembly manual again, and to me it appears that what they list in the picture as reference point #35 is the door center line. They do not list the measurement of it, but from that line they do list the distance for each hole and the hole sizes. Once I get a few measurements from a door today, I will compare them to the assembly manual and update everyone. Drew __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

04-16-2009, 09:59 PM	#5
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	Re: NEED HELP CST door emblem location Thanks I have the assembly guide too and wish it were more clear on this stuff I wasn't sure if that was a center line of the door or not. __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4

04-16-2009, 10:27 PM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: NEED HELP CST door emblem location The emblems should have "barrel clips". If you are careful they should pry off. Now, from the back of the door, 15 7/16" and 19 1/2" to the centers. I just measured a door i have here that looks correct yet. The door is off a 68 pickup, but i think the emblem location is the same as a blazer. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-16-2009, 06:16 PM	#3
CAMVEE Registered User Join Date: Mar 2009 Location: League city tx Posts: 8	Re: NEED HELP CST door emblem location Hey, I am stripping a 72 CST Blazer for paint, I am wondering how to remove the cst door emblems, is there an easy way? Thanks,,,

04-16-2009, 10:46 PM	#8
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	Re: NEED HELP CST door emblem location AWESOME thank you! __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.