1966 C10 Window Regulator

[welch_41]

I've been searching and searching and can't find shat about window regulator repair kit for a 66' C10. The regulator as a whole is in good shape but the teeth on the small sprocket are worn and tend to lock up going either direction. Will the regulator repair kit for a 67' work on a 66? The repair kits for models up to 64' don't look like what I pulled out of the door. Repair kits for 65' and 66' do not seem to exist. However, the kit for the 67' looks real close but that only goes as far as looking at a picture on a website. Thanks in advance for the help.

[LILRED66]

For the money and time, I would buy a new window regulator. They are available from all the usual suspects. I think they are less than $50.00 bones.

[welch_41]

The time wasn't an issue but if I can save a few bucks and get a repair kit for around 15 bucks then there is some extra money that I can spend on replacing the seals in the door.

[LILRED66]

I don't know of anyone selling a rebuild kit for the '60-'63 or the 4-5-6 chevy truck window regulators. Here is a link to LMC Truck, but they don't sell them either, only the replacment window regulator.

http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=13

I have several good, used window regulators, if you want to go that route. Let me know if I can help and good luck with the search.

[welch_41]

These are the only ones that I've found which don't match what I have.
http://www.classicparts.com/Door-Parts/products/185/3/0
Do the regulators that you have move freely?

[LILRED66]

The window regulators I have are good, used parts, that operate properly. Let me know if I can help.