Cab to Fender seal brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**willbilly** · 04-26-2009, 06:24 PM

I am looking for the r&l tin brackets that mount to the cab that the rubber seals are stapled to.

teeitup · 04-26-2009, 06:32 PM

Sorry I did have some must of sold them. Thanks Randy

**willbilly** · 04-27-2009, 05:18 PM

Randy,Thank's for lookin!

byrd · 04-27-2009, 06:13 PM

I have an extra set that was made up by a member. I can't recall his user name right now, but if you want them Lets says $25 shipped. I can get you some pics of them if you would like, they are spot on remakes. LMK.

Randy

**t korinek** · 04-28-2009, 03:12 AM

I have 4 sets of them, they need the rubber seals replaced, if the ones from byrd dont work for you.
Tom

Woody · 04-28-2009, 10:35 AM

Any one have a pic of the brackets?? I have a set of the rubber seals but never could figure how to mount them.

my67chevytruck · 04-28-2009, 10:47 AM

Quote:

Originally Posted by Woody

Any one have a pic of the brackets?? I have a set of the rubber seals but never could figure how to mount them.

Woody this link should help you. I recalled seeing it in the past.

http://67-72chevytrucks.com/vboard/s...t=fender+seals

Orange1970 · 06-27-2014, 08:02 PM

I am also looking for a set of tin brackets to mount the seals. If anyone has a set they are willing to part with please let me know! Thanks Dan

allons · 06-28-2014, 10:10 AM

I have been looking for a pair of those brackets for MONTHS, any help locating some would be very much appreciated. Thanks,

teeitup · 06-28-2014, 11:43 AM

I think I got 4 or 5 sets of brackets out there now, $22 shipped each pair.

Undone · 06-28-2014, 04:42 PM

I'll take a set, also need a pair of the large washer front inner fender bolts if you have any. Thanks

teeitup · 06-28-2014, 04:49 PM

I just looked and I have quite a few sets, the seals are all bad. On the washers your needing, they are on the bolts, I've never taken the washers off before

Undone · 06-28-2014, 06:34 PM

Quote:

Originally Posted by teeitup

I just looked and I have quite a few sets, the seals are all bad. On the washers your needing, they are on the bolts, I've never taken the washers off before

Need bolts and washers.

teeitup · 06-28-2014, 08:23 PM

pic of 3 sets I have plus the bolts, $5 for the pair of them

Undone · 06-28-2014, 09:10 PM

I'll take them,PM payment info.

tjsblazer · 06-28-2014, 10:19 PM

Randy, I would take a set of your brackets please. As long as I can clean them up good in a media blaster and they will still be good metal.
Thanks, Jeff.

**PDXk5** · 08-17-2014, 01:29 AM

Quote:

Originally Posted by tjsblazer

Randy, I would take a set of your brackets please. As long as I can clean them up good in a media blaster and they will still be good metal.
Thanks, Jeff.

Hi Randy, I would be interested in a set too, if they are solid like tjsblazer noted.

Thanks, (another) Jeff

teeitup · 08-17-2014, 10:16 AM

Jeff, I have more sets now, they are solid

**PDXk5** · 08-17-2014, 10:22 AM

Quote:

Originally Posted by teeitup

Jeff, I have more sets now, they are solid

Sweet. $22 shipped to 97217?

Remind me your email so I can pay through PayPal. Do you have the screws that go with the seal brackets? If so, I need those too.

Thanks Jeff.

**PDXk5** · 08-17-2014, 10:49 AM

Payment sent!

Thank you, been looking for a set of these

mikeoj · 08-17-2014, 04:53 PM

Teeitup.I'll take a solid set if you still them.PM me.paypal.Thanks,Mike

hvacfatboy · 08-18-2014, 07:31 AM

put me in line for a set if still available Thanks Richie

teeitup · 08-18-2014, 01:00 PM

Richie, I have 3 or 4 sets still, I will pm you info. Thanks Randy

Rich72C10 · 11-25-2020, 01:26 PM

It appears when my truck was redone some years back (two owners before me) the seals were not replaced/installed/whatever.

Sooo sorry to dig up a old thread but I am looking for the hardware - brackets/bolts. Anyone from this thread still around to offer any up?

Thanks in advance for any help

**Jeff's bowtie's** · 11-25-2020, 04:41 PM

I have a pair of these how’s $35.00 shipped let me know and I can post pics

04-26-2009, 06:24 PM	#1
willbilly Junior Member Join Date: Oct 2008 Location: ontario,ny Posts: 34	Cab to Fender seal brackets I am looking for the r&l tin brackets that mount to the cab that the rubber seals are stapled to.

04-26-2009, 06:32 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Cab to Fender seal brackets Sorry I did have some must of sold them. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-26-2009 at 06:37 PM.

04-27-2009, 05:18 PM	#3
willbilly Junior Member Join Date: Oct 2008 Location: ontario,ny Posts: 34	Re: Cab to Fender seal brackets Randy,Thank's for lookin!

04-28-2009, 03:12 AM	#5
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Cab to Fender seal brackets I have 4 sets of them, they need the rubber seals replaced, if the ones from byrd dont work for you. Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-28-2009, 10:35 AM	#6
Woody Registered User Join Date: Feb 2000 Location: Georgetown, KY, USA Posts: 631	Re: Cab to Fender seal brackets Any one have a pic of the brackets?? I have a set of the rubber seals but never could figure how to mount them.

06-27-2014, 08:02 PM	#8
Orange1970 Registered User Join Date: Feb 2009 Location: Sauk City, WI Posts: 15	Re: Cab to Fender seal brackets I am also looking for a set of tin brackets to mount the seals. If anyone has a set they are willing to part with please let me know! Thanks Dan

06-28-2014, 10:10 AM	#9
allons Registered User Join Date: Apr 2013 Location: West Liberty, Ohio Posts: 288	Re: Cab to Fender seal brackets I have been looking for a pair of those brackets for MONTHS, any help locating some would be very much appreciated. Thanks,

06-28-2014, 11:43 AM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Cab to Fender seal brackets I think I got 4 or 5 sets of brackets out there now, $22 shipped each pair. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-28-2014, 04:42 PM	#11
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: Cab to Fender seal brackets I'll take a set, also need a pair of the large washer front inner fender bolts if you have any. Thanks

06-28-2014, 04:49 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Cab to Fender seal brackets I just looked and I have quite a few sets, the seals are all bad. On the washers your needing, they are on the bolts, I've never taken the washers off before __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-28-2014, 08:23 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Cab to Fender seal brackets pic of 3 sets I have plus the bolts, $5 for the pair of them Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-28-2014, 09:10 PM	#15
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: Cab to Fender seal brackets I'll take them,PM payment info.

06-28-2014, 10:19 PM	#16
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: Cab to Fender seal brackets Randy, I would take a set of your brackets please. As long as I can clean them up good in a media blaster and they will still be good metal. Thanks, Jeff. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

08-17-2014, 10:16 AM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Cab to Fender seal brackets Jeff, I have more sets now, they are solid __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-17-2014, 10:49 AM	#20
PDXk5 Senior Member Join Date: Aug 2012 Location: Portland, OR Posts: 939	Re: Cab to Fender seal brackets Payment sent! Thank you, been looking for a set of these



Register or Log In To remove these advertisements.

08-17-2014, 04:53 PM	#21
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	Re: Cab to Fender seal brackets Teeitup.I'll take a solid set if you still them.PM me.paypal.Thanks,Mike __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.

08-18-2014, 07:31 AM	#22
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	Re: Cab to Fender seal brackets put me in line for a set if still available Thanks Richie

08-18-2014, 01:00 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Cab to Fender seal brackets Richie, I have 3 or 4 sets still, I will pm you info. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2020, 01:26 PM	#24
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: Cab to Fender seal brackets It appears when my truck was redone some years back (two owners before me) the seals were not replaced/installed/whatever. Sooo sorry to dig up a old thread but I am looking for the hardware - brackets/bolts. Anyone from this thread still around to offer any up? Thanks in advance for any help __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

11-25-2020, 04:41 PM	#25
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,955	Re: Cab to Fender seal brackets I have a pair of these how’s $35.00 shipped let me know and I can post pics

Register or Log In To remove these advertisements.