WIW NOS right inner fender well - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shaneschevys · 05-03-2009, 09:10 PM

Picked this up this past weekend. Just wondering what it was worth. It has never been installed & still has the GM sticker on it.

**72ironmike** · 05-03-2009, 09:21 PM

$75-$150 ?

see ten · 05-03-2009, 09:30 PM

They're still available over the parts counter at your local chevy dealer. As long as you didn't pay more then counter price you did good. If you're planning on reselling it....Don't expect to get any more then counter price for it.

nds1968 · 05-03-2009, 09:51 PM

I paid $150 in the fall for a pass. side. I think it was well worth it. My original one needs sand blasted and a few pin holes fixed if I would use it. So now I can sell it for $50 or so and be ahead of the game.

If these are still available at the dealership I am going have to price the driver side.

LUV2XCLR8 · 05-03-2009, 09:52 PM

I keep hearing that Asa, but nobody seems to want to post any part numbers

**Classic Bowties** · 05-03-2009, 10:02 PM

Quote:

Originally Posted by LUV2XCLR8

I keep hearing that Asa, but nobody seems to want to post any part numbers

R/H - Pn. 3882650
L/H - Pn. 6270855

Cyclone44 · 05-03-2009, 10:11 PM

Quote:

Originally Posted by Classic Bowties

R/H - Pn. 3882650
L/H - Pn. 6270855

Thanks for the parts #'s

19stepSide72 · 05-03-2009, 11:04 PM

whats counter price?

**Classic Heartbeat** · 05-04-2009, 11:43 AM

The R/H $223.55 and L/H $254.43 Both now are discontinued. I found 2 R/H in the country, at least one of witch probably is a reproduction. None of the lefts were found. Unless of coarse you look in my shop where I have a pair of them...lol Sorry but my price isn't what is listed. I may be using them on my panel, but am not married to that idea...

WES

LUV2XCLR8 · 05-04-2009, 02:34 PM

Ouch, I think I will use repoops

**Classic Heartbeat** · 05-04-2009, 05:16 PM

Nothing wrong with the repops LUV2XCLR8. That was why I am not married to the idea of using the NOS ones that I have. However they are a little easier to install and have the nuts welded in place where the repops do not. WES

LUV2XCLR8 · 05-04-2009, 06:28 PM

Same here, I'd like a set, but not for that much

nds1968 · 05-04-2009, 06:39 PM

Quote:

Originally Posted by shaneschevys

Picked this up this past weekend. Just wondering what it was worth. It has never been installed & still has the GM sticker on it.

So what did you pay? Looks like I made out good.

**special-K** · 05-04-2009, 07:55 PM

Figure double the cost of repop for n.o.s.
It depends on the part.But 200% is a good minimum.Just because many are willing to use reproduction doesn`t make it worth less.There will always be the ones who will pay well for original,as manufactured,parts.

05-03-2009, 09:10 PM	#1
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	WIW NOS right inner fender well Picked this up this past weekend. Just wondering what it was worth. It has never been installed & still has the GM sticker on it. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

05-03-2009, 09:21 PM	#2
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,057	Re: WIW NOS right inner fender well $75-$150 ?

05-03-2009, 09:30 PM	#3
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: WIW NOS right inner fender well They're still available over the parts counter at your local chevy dealer. As long as you didn't pay more then counter price you did good. If you're planning on reselling it....Don't expect to get any more then counter price for it.

05-03-2009, 09:51 PM	#4
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: WIW NOS right inner fender well I paid $150 in the fall for a pass. side. I think it was well worth it. My original one needs sand blasted and a few pin holes fixed if I would use it. So now I can sell it for $50 or so and be ahead of the game. If these are still available at the dealership I am going have to price the driver side. __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

05-03-2009, 09:52 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: WIW NOS right inner fender well I keep hearing that Asa, but nobody seems to want to post any part numbers __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-03-2009, 11:04 PM	#8
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: WIW NOS right inner fender well whats counter price?

05-04-2009, 11:43 AM	#9
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: WIW NOS right inner fender well The R/H $223.55 and L/H $254.43 Both now are discontinued. I found 2 R/H in the country, at least one of witch probably is a reproduction. None of the lefts were found. Unless of coarse you look in my shop where I have a pair of them...lol Sorry but my price isn't what is listed. I may be using them on my panel, but am not married to that idea... WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-04-2009, 02:34 PM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: WIW NOS right inner fender well Ouch, I think I will use repoops __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-04-2009, 05:16 PM	#11
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: WIW NOS right inner fender well Nothing wrong with the repops LUV2XCLR8. That was why I am not married to the idea of using the NOS ones that I have. However they are a little easier to install and have the nuts welded in place where the repops do not. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-04-2009, 06:28 PM	#12
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: WIW NOS right inner fender well Same here, I'd like a set, but not for that much __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-04-2009, 07:55 PM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WIW NOS right inner fender well Figure double the cost of repop for n.o.s. It depends on the part.But 200% is a good minimum.Just because many are willing to use reproduction doesn`t make it worth less.There will always be the ones who will pay well for original,as manufactured,parts. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.