|
07-01-2009, 12:47 PM
|
#1 |
|
Registered User
 
Join Date: Jan 2009
Location: 77042, Texas
Posts: 102
|
Spindle Question?
How do you tell the difference from a drop spindle and a stock height spindle? All help is appriciated.
Thanks |
|
|
|
07-01-2009, 12:55 PM
|
#2 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,042
|
Re: Spindle Question?
Dropped spindles will generally have the spindle hub higher on the body of the spindle & the spindle hub for an OE unit would be located closer to the bottom of the spindles body. Make sense? Another suggestion is most mfr's will stamp p/n's on their respective parts. If there are any numbers, google the number & see what you get.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 07-01-2009 at 12:57 PM. |
|
|
|
|
07-28-2009, 03:29 PM
|
#3 | |
|
Kvn1011
Join Date: May 2009
Location: kankakee il
Posts: 560
|
Re: Spindle Question?
Quote:
i have been reading that Z'ing the frame 3 inches will allow you to lay frame on 24"wheels or 30" tall tires, now my question is, will three inch drop spindles do the same, without Z'ing the frame?? |
|
|
|
|
|
07-29-2009, 01:42 AM
|
#4 | |
|
Kvn1011
Join Date: May 2009
Location: kankakee il
Posts: 560
|
Re: Spindle Question?
Quote:
|
|
|
|
|
|
07-29-2009, 09:16 AM
|
#5 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,042
|
Re: Spindle Question?
At that tire height, no, you can't lay frame w/a stock front suspension & 3" drop spindles. You can't lay frame w/a 3" 'Z' & stock spindles.
You need the 'Z' & the spindles (or a Dropmember & spindles).
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 07-29-2009 at 09:17 AM. |
|
|
|
|
07-29-2009, 04:35 PM
|
#6 | |
|
Kvn1011
Join Date: May 2009
Location: kankakee il
Posts: 560
|
Re: Spindle Question?
Quote:
thats what i was wanting to clarify, after a month or so i will start on my 72 still studying and learning from you guys, thanks again!! |
|
|
|
|
 |
| Bookmarks |
| Tags |
| drop, spindle, stock |
|
|
Linear Mode
