Need roll bar padding - The 1947 - Present Chevrolet & GMC Truck Message Board Network

packers05 · 07-31-2009, 07:30 AM

Anyone have any tips on where to get the padding that will give me easyist install and best looks.

Burt4x4 · 07-31-2009, 09:41 AM

First time I use pipe insolation..it didn't last too long but it came in long sticks.
I now use Summit brand padding you see in the pic above.
It only comes in 3ft sections and it has a "fat" side that you install closest to your head or seat.
They sell wide tape to but I found some at a hrdware store.

1949gmc · 07-31-2009, 12:15 PM

Try one of these:

http://www.speedwaymotors.com/Roll-Bar-Padding,896.html

or

http://www.speedwaymotors.com/High-D...dding,445.html

Burt4x4 · 07-31-2009, 12:56 PM

Here is what I used:
http://www.summitracing.com/parts/KIR-99001/

They have some fancy stuff, more for race though:

1949gmc · 07-31-2009, 01:28 PM

Yeah, I used that high density stuff on my IMCA modified. It's good stuff, but it doesn't cover the backside.

07-31-2009, 07:30 AM	#1
packers05 Registered User Join Date: Feb 2009 Location: minonk illinois Posts: 224	Need roll bar padding Anyone have any tips on where to get the padding that will give me easyist install and best looks.

07-31-2009, 09:41 AM	#2
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: Need roll bar padding First time I use pipe insolation..it didn't last too long but it came in long sticks. I now use Summit brand padding you see in the pic above. It only comes in 3ft sections and it has a "fat" side that you install closest to your head or seat. They sell wide tape to but I found some at a hrdware store. __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks

07-31-2009, 12:15 PM	#3
1949gmc Registered User Join Date: Nov 2004 Location: Lindenhurst, IL Posts: 659	Re: Need roll bar padding Try one of these: http://www.speedwaymotors.com/Roll-Bar-Padding,896.html or http://www.speedwaymotors.com/High-D...dding,445.html

07-31-2009, 12:56 PM	#4
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: Need roll bar padding Here is what I used: http://www.summitracing.com/parts/KIR-99001/ They have some fancy stuff, more for race though: __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks

07-31-2009, 01:28 PM	#5
1949gmc Registered User Join Date: Nov 2004 Location: Lindenhurst, IL Posts: 659	Re: Need roll bar padding Yeah, I used that high density stuff on my IMCA modified. It's good stuff, but it doesn't cover the backside.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.