My patina - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

50MOTORHEAD · 03-08-2009, 12:33 PM

You could have at least washed it before you took the pictures-He-He,looks good,it looks OLD,,,,,,,ain't that the point !-KB

andrewt2 · 03-11-2009, 11:09 PM

this is a great looking build, i really enjoy what you did with it!

BlueJeep · 04-29-2009, 02:19 PM

Can you post some pics of the inside of your bed? I'm curious to see what you did back there and how much of it you lost.

Also, do you have a picture of how you mated the OEM column to the s10 steering box?

Thanks!

c10addict · 04-29-2009, 02:44 PM

Subscribed... This is one of the trucks that made me go buy my 54 GMC

iokua80 · 04-30-2009, 05:11 AM

I'll try to get some pics of the bed today. With the way the c notch and four link was set I lost quite a bit of bed. I could have actually made the c notch smaller but didn't realize that it was gonna be too big until I got the bed on the frame. Oh well. It would lay out on 22s.

I'll also get a couple pics of the steering. It wasn't hard. Just took some thinking and testing. Me and my buddy tried one way and modified it once to get it to work. You'll see what I mean when I post the pics.
Later,
Josh

Quote:

Originally Posted by BlueJeep

Can you post some pics of the inside of your bed? I'm curious to see what you did back there and how much of it you lost.

Also, do you have a picture of how you mated the OEM column to the s10 steering box?

Thanks!

iokua80 · 04-30-2009, 07:01 PM

This is the rear of the bed near the tailgate

This is near the passenger side at the head of the bed.

And this is the mini-tub

BlueJeep · 04-30-2009, 07:51 PM

Any pictures of the "good stuff" under that floor, maybe with the tailgate open? And the steering column?

Thanks!

jeffs51chevy · 04-30-2009, 09:45 PM

Quote:

Originally Posted by BlueJeep

Any pictures of the "good stuff" under that floor, maybe with the tailgate open? And the steering column?

Thanks!

BlueJeep,
I definetly don't want to hijack, but I've got a few pics of how I worked the steering stuff out on my thread. Just search "Yet Another s10 Swap". It seemed to work out slick.

Jeff

BlueJeep · 04-30-2009, 10:42 PM

Quote:

Originally Posted by jeffs51chevy

BlueJeep,
I definetly don't want to hijack, but I've got a few pics of how I worked the steering stuff out on my thread. Just search "Yet Another s10 Swap". It seemed to work out slick.

Jeff

Did you modify your stock steering column too? I'll have to check it out. I really dig the "stockish" interior.

iokua80 · 06-22-2009, 08:46 PM

It's been a while but I thought I'd share my new part.....well sorta new. More like rusty. Anyways, I made this yesterday out of logging chain. The shift knob is a Tiki knob from Hawaii. Figured it would go good with me since I'm Hawaiian too. haha Anyways, here's some pics.

Later,
Josh

72BlckButy · 06-22-2009, 08:57 PM

Nice work on the shifter!

iokua80 · 06-22-2009, 09:33 PM

Thanks. It did not start out as having so many curves and bends. I was gonna just have one bend in it but it ended up not working. Then it hit the seat. Or it hit the dash. Or the steering wheel. LOL So basically I just said screw it and that's how it turned out.
Later,
Josh

72BlckButy · 06-22-2009, 09:38 PM

Well Josh, I think it came out just right regardless...

Any other plans for it?

iokua80 · 06-23-2009, 05:03 AM

My only plans are to drive it till it breaks then fix it and drive it more. Want to try to do some different headers though. I don't like how the ones on there now have the steering shaft go through the middle of it. Other than that, nothing else. Maybe and this is a big maybe, I'll do paint in about 10 years. If I do paint it, I want to chop it and pancake the hood.
Later,
Josh

texas56 · 06-26-2009, 09:24 AM

Awesome truck! We are doing kinda the same thing. We had plans to paint it so alot of the body work is done so now going to Fake Patina it.

Most challanging parts we have ran into is trying to make the running board mounts look good and also the Toe board and Floors. As far as headers, Im sure it will matter on placement of the motor in the compartment, but I ended up using 67- 81 camaro SBC. they fit very well and you didnt have to have that tube over the steering shaft. I actually am running a blown Small Block and it is going to fit under the hood. I can email pics if you want to see how the headers fit. Let me know! Great JOb again on your truck. Looks cool!

iokua80 · 06-26-2009, 12:46 PM

Nice. Sounds like you're gonna have a pretty sweet truck. Send some pictures of the headers and of your truck. I think I found a header that will work but am interested in seeing yours. I believe that a 69-72 chevy exhaust manifold will work. Thanks for the pics
Later,
Josh

texas56 · 06-26-2009, 03:33 PM

Quote:

Originally Posted by iokua80

Nice. Sounds like you're gonna have a pretty sweet truck. Send some pictures of the headers and of your truck. I think I found a header that will work but am interested in seeing yours. I believe that a 69-72 chevy exhaust manifold will work. Thanks for the pics
Later,
Josh

Ok shoot me an email and Ill send them.I cant seem to figure out how to post them

rustSpot · 08-10-2009, 02:36 PM

Dig this build! One of my favs on the forum for sure.

Laid_Out_50 · 08-10-2009, 07:26 PM

I like your truck and how low it is

03-08-2009, 12:33 PM	#51
50MOTORHEAD Registered User Join Date: Nov 2008 Location: midwest Posts: 113	Re: My patina You could have at least washed it before you took the pictures-He-He,looks good,it looks OLD,,,,,,,ain't that the point !-KB

03-11-2009, 11:09 PM	#52
andrewt2 Registered User Join Date: Oct 2007 Location: Carbondale, Kansas Posts: 547	Re: My patina this is a great looking build, i really enjoy what you did with it!

04-29-2009, 02:19 PM	#53
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: My patina Can you post some pics of the inside of your bed? I'm curious to see what you did back there and how much of it you lost. Also, do you have a picture of how you mated the OEM column to the s10 steering box? Thanks! __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

04-29-2009, 02:44 PM	#54
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: My patina Subscribed... This is one of the trucks that made me go buy my 54 GMC __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

04-30-2009, 07:01 PM	#56
iokua80 Registered User Join Date: Apr 2008 Location: Sylva NC Posts: 92	Re: My patina This is the rear of the bed near the tailgate This is near the passenger side at the head of the bed. And this is the mini-tub

04-30-2009, 07:51 PM	#57
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: My patina Any pictures of the "good stuff" under that floor, maybe with the tailgate open? And the steering column? Thanks! __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

06-22-2009, 08:46 PM	#60
iokua80 Registered User Join Date: Apr 2008 Location: Sylva NC Posts: 92	Re: My patina It's been a while but I thought I'd share my new part.....well sorta new. More like rusty. Anyways, I made this yesterday out of logging chain. The shift knob is a Tiki knob from Hawaii. Figured it would go good with me since I'm Hawaiian too. haha Anyways, here's some pics. Later, Josh

06-22-2009, 08:57 PM	#61
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: My patina Nice work on the shifter! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-22-2009, 09:33 PM	#62
iokua80 Registered User Join Date: Apr 2008 Location: Sylva NC Posts: 92	Re: My patina Thanks. It did not start out as having so many curves and bends. I was gonna just have one bend in it but it ended up not working. Then it hit the seat. Or it hit the dash. Or the steering wheel. LOL So basically I just said screw it and that's how it turned out. Later, Josh

06-22-2009, 09:38 PM	#63
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: My patina Well Josh, I think it came out just right regardless... Any other plans for it? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-23-2009, 05:03 AM	#64
iokua80 Registered User Join Date: Apr 2008 Location: Sylva NC Posts: 92	Re: My patina My only plans are to drive it till it breaks then fix it and drive it more. Want to try to do some different headers though. I don't like how the ones on there now have the steering shaft go through the middle of it. Other than that, nothing else. Maybe and this is a big maybe, I'll do paint in about 10 years. If I do paint it, I want to chop it and pancake the hood. Later, Josh

06-26-2009, 09:24 AM	#65
texas56 Registered User Join Date: Jun 2009 Location: Dickinson Texas Posts: 286	Re: My patina Awesome truck! We are doing kinda the same thing. We had plans to paint it so alot of the body work is done so now going to Fake Patina it. Most challanging parts we have ran into is trying to make the running board mounts look good and also the Toe board and Floors. As far as headers, Im sure it will matter on placement of the motor in the compartment, but I ended up using 67- 81 camaro SBC. they fit very well and you didnt have to have that tube over the steering shaft. I actually am running a blown Small Block and it is going to fit under the hood. I can email pics if you want to see how the headers fit. Let me know! Great JOb again on your truck. Looks cool!

06-26-2009, 12:46 PM	#66
iokua80 Registered User Join Date: Apr 2008 Location: Sylva NC Posts: 92	Re: My patina Nice. Sounds like you're gonna have a pretty sweet truck. Send some pictures of the headers and of your truck. I think I found a header that will work but am interested in seeing yours. I believe that a 69-72 chevy exhaust manifold will work. Thanks for the pics Later, Josh

08-10-2009, 02:36 PM	#68
rustSpot NO REGRETS Join Date: Oct 2006 Location: Rockwall, Texas Posts: 498	Re: My patina Dig this build! One of my favs on the forum for sure.

08-10-2009, 07:26 PM	#69
Laid_Out_50 Registered User Join Date: Aug 2009 Location: Bay Area Cali Posts: 270	Re: My patina I like your truck and how low it is



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.