Suspension Talk - The 1947 - Present Chevrolet & GMC Truck Message Board Network

austinstocker · 08-28-2009, 12:32 PM

I recently ordered some 2 1/2" drop spindles and 4" Springs for my 67 C-10, SWB. I ordered them through GMC Pauls online. Put the springs in... Rides like the springs they are sending out for these things are waaay too stiff. Anyone running into this issue? Shocks are not too long or anything, just feels as if I have some large blocks of wood for rear springs. Haha. Once again, just asking if anyone has ordered through GMC Pauls and has this problem.

-1967 Chev SWB, Big Block, Muncie 4 Spd-

ChevLoRay · 08-28-2009, 12:35 PM

If the old springs were shot, it could be what you have now is what it should have been all along. My truck had 2000# rate coils on the back and the new 4-inch shorter springs has a waaaaaaaaay better ride than the old stiff ones did.

If you drove my '96 with leaf springs, you'd prefer the coils on your truck.

austinstocker · 08-28-2009, 12:38 PM

Yeah, I realize that. I was expecting them to be a little bit more stiff... but this is terrible. I might have to go with a car type spring, only problem being, you never know what drop you will get.

austinstocker · 08-28-2009, 12:48 PM

Quote:

Originally Posted by ChevLoRay

If the old springs were shot, it could be what you have now is what it should have been all along. My truck had 2000# rate coils on the back and the new 4-inch shorter springs has a waaaaaaaaay better ride than the old stiff ones did.

If you drove my '96 with leaf springs, you'd prefer the coils on your truck.

Hey ChevLoRay, do you have any pictures of your 69 pickup?

BossHogg69 · 08-28-2009, 03:15 PM

Quote:

Originally Posted by austinstocker

I recently ordered some 2 1/2" drop spindles and 4" Springs for my 67 C-10, SWB. I ordered them through GMC Pauls online. Put the springs in... Rides like the springs they are sending out for these things are waaay too stiff. Anyone running into this issue? Shocks are not too long or anything, just feels as if I have some large blocks of wood for rear springs. Haha. Once again, just asking if anyone has ordered through GMC Pauls and has this problem.

Well, I ordered a set of 6" drop rear springs from them for my '69 that I haven't installed yet. I do know that they asked a lot of questions about the truck saying that the springs' rate is customized for each application. I don't mind a stiff ride, and everyone's opinion of stiff/unbearable is different, but I'm shooting for a "Pro'Touring" theme for my truck, so it may suit me fine.

dan42 · 08-28-2009, 03:29 PM

I have 4" drop springs on my '67 SWB from GMC Paul's, and they seem to ride fine - I had the heavy duty ones from the factory on before and they are a little smoother than those. I have 2" drop springs and a sway bar on the front, and new shocks all around, and it behaves itself nicely on the road.

**lolife99** · 08-28-2009, 04:16 PM

Got any pics of your suspension? Your not hitting on the bumpstops, are you?

unclewatts · 08-28-2009, 11:37 PM

Quote:

Originally Posted by lolife99

Got any pics of your suspension? Your not hitting on the bumpstops, are you?

That was my question too.

big_al_71 · 08-29-2009, 12:09 AM

I was also wondering the same thing about the bump stops...I have six inch slowering springs and my bucket rides awesome..

**N2TRUX** · 08-29-2009, 10:39 AM

While we are always eager to discuss, I have heard great things abut GMC Paul. I would consider contacting him to get some input.

In the meantime, post pics and give us more details.

austinstocker · 08-29-2009, 02:16 PM

Yeah, I know that I am not hitting the bump stops.. I am going to try some different shocks first of all. Thanks for all the input, and it's good to see some of you are happy with GMC Pauls springs. I'll figure it out. Thanks.

08-28-2009, 12:32 PM	#1
austinstocker Registered User Join Date: Jul 2009 Location: Enumclaw, WA Posts: 49	Suspension Talk I recently ordered some 2 1/2" drop spindles and 4" Springs for my 67 C-10, SWB. I ordered them through GMC Pauls online. Put the springs in... Rides like the springs they are sending out for these things are waaay too stiff. Anyone running into this issue? Shocks are not too long or anything, just feels as if I have some large blocks of wood for rear springs. Haha. Once again, just asking if anyone has ordered through GMC Pauls and has this problem. -1967 Chev SWB, Big Block, Muncie 4 Spd-

08-28-2009, 12:35 PM	#2
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Suspension Talk If the old springs were shot, it could be what you have now is what it should have been all along. My truck had 2000# rate coils on the back and the new 4-inch shorter springs has a waaaaaaaaay better ride than the old stiff ones did. If you drove my '96 with leaf springs, you'd prefer the coils on your truck. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

08-28-2009, 12:38 PM	#3
austinstocker Registered User Join Date: Jul 2009 Location: Enumclaw, WA Posts: 49	Re: Suspension Talk Yeah, I realize that. I was expecting them to be a little bit more stiff... but this is terrible. I might have to go with a car type spring, only problem being, you never know what drop you will get. __________________ ____________________________ 1967 C10 SWB Big Block 4 Speed

08-28-2009, 03:29 PM	#6
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Suspension Talk I have 4" drop springs on my '67 SWB from GMC Paul's, and they seem to ride fine - I had the heavy duty ones from the factory on before and they are a little smoother than those. I have 2" drop springs and a sway bar on the front, and new shocks all around, and it behaves itself nicely on the road. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

08-28-2009, 04:16 PM	#7
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Suspension Talk Got any pics of your suspension? Your not hitting on the bumpstops, are you? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-29-2009, 12:09 AM	#9
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Suspension Talk I was also wondering the same thing about the bump stops...I have six inch slowering springs and my bucket rides awesome.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-29-2009, 10:39 AM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Suspension Talk While we are always eager to discuss, I have heard great things abut GMC Paul. I would consider contacting him to get some input. In the meantime, post pics and give us more details. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-29-2009, 02:16 PM	#11
austinstocker Registered User Join Date: Jul 2009 Location: Enumclaw, WA Posts: 49	Re: Suspension Talk Yeah, I know that I am not hitting the bump stops.. I am going to try some different shocks first of all. Thanks for all the input, and it's good to see some of you are happy with GMC Pauls springs. I'll figure it out. Thanks. __________________ ____________________________ 1967 C10 SWB Big Block 4 Speed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.