LFD's gas pedal adapters (71-72 gas pedals in 67-70's) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 11-09-2009, 09:11 PM

LFD's

Gas pedal adapters for 67-70 chevy's

Like most of us with 67-70's the one down fall is the gas pedal linkage rods. I personally had had a few over the years that have self accelerated when the motor would lift as the chassis flexed, not real fun. So over the years I always like to install the 71-72 cable style gas pedal and now you can too as a bolt in unit! All you need to supply is the 71-72 gas pedal and what ever kind of cable that best suits your needs. Wether it is a stock SB,BB with a carb or a newer LT1,LSX style with injection this is the way to go. It gives more room behind the motor and cleans up the fire wall at the same time. This kit is designed to allow you to fill the 3 bolt holes in the firewall were the old pedal mounted and still use the weld nuts on the inside of the fire wall for the new mount plate. All you have to do is drill one hole for the cable to exit and hit the road. Install time is approximately 1-2 hours depending on how well you bend under the dash. If the engine bay is empty figure on 30 mins and you will be done.

Here are a few pics with the 71-72 set up in a 68 that I did for a customer who wanted everything cleaned up and wanted the safer cable style linkage at the same time.

The adapter kit includes the adapter plate, hardware and instructions. The price shipped in the USA is $35 total (this includes shipping and tax)

Kevin
LFD Inc.

Lines up with the stock location of the floor mounted pedal.
[IMG]

[/IMG]

Can be sued with the stock 71-72 cable.
[IMG]

[/IMG]

Notice the mounting holes are gone!
[IMG]

[/IMG]

A few minutes with a 1/2" drill and a small flat file and you are ready to go. Note a lot of the newer cables just use a round hole so it is even less work but the square hole only took about 5 minutes once the 1/2" hole was drilled.
[IMG]

[/IMG]

Here is my 70 SWB LowBuck with a 92 LT1 and my pedal conversion with over 16,000 miles so far.
[IMG]

[/IMG]

sdailey · 11-09-2009, 09:21 PM

Kevin you're a mind reader. I'm doing this very install in my '69. I'm in for one of your kits when you get everything setup.

Thanks.

stealthy '69 · 11-09-2009, 09:27 PM

That's pretty cool. Count me in on one too.

Sinister · 11-09-2009, 09:45 PM

That rocks. Count me in. Are the '72 pedal assemblies repopped?

fatboys69 · 11-09-2009, 09:46 PM

just waitin on paypal info GOTTA AVE ONE !!!! SLICK !!!!!!!!
MAN YOU DO NICE WORK !!!!!

**lolife99** · 11-09-2009, 09:51 PM

Kevin,...
count me in also.
Send me a PM when you have your Paypal account set up.
Thanks.

**fine69** · 11-09-2009, 09:58 PM

Hmmmm, who knew? I always liked the 67-70 rods better. Never would have thought about adding a cable setup to a truck.

Good job on it though. Hope you sell a bunch.

Rokcrln · 11-09-2009, 10:04 PM

Quote:

Originally Posted by fine69

Hmmmm, who knew? I always liked the 67-70 rods better. Never would have thought about adding a cable setup to a truck.

Good job on it though. Hope you sell a bunch.

Just make sure your motor and trans mounts are in good shape. I happen to know fence's dont hold up to our trucks very well

Kevin
LFD Inc.

**Hart_Rod** · 11-09-2009, 10:06 PM

Paypal sent.

R/

Rokcrln · 11-09-2009, 10:29 PM

PayPal link is up!

Click here

I think I will have a busy day Tuesday

Kevin
LFD Inc.

Jim_PA · 11-09-2009, 10:30 PM

Quote:

Originally Posted by Hart_Rod

Paypal sent.

R/

But how do you know where to send payment to?? I want one too

Ok, Paypal info was posted at the same time. I'm now all paid up too

Rokcrln · 11-09-2009, 10:33 PM

Quote:

Originally Posted by Jim_PA

But how do you know where to send payment to?? I want one too

He had the early release form sent to him

The link is now at the bottom of my sig!

Kevin
LFD Inc.

Jim_PA · 11-09-2009, 10:34 PM

Quote:

Originally Posted by Rokcrln

He had the early release form sent to him

The link is now at the bottom of my sig!

Kevin
LFD Inc.

Aren't there laws against that?

gcburdic · 11-09-2009, 10:36 PM

Paypal sent!!!....Thanks Kevin!

Rokcrln · 11-09-2009, 10:52 PM

Quote:

Originally Posted by Jim_PA

Aren't there laws against that?

Yes in PA but in Ca and FL we over look that kind of thing.

Kevin
LFD Inc.

**lolife99** · 11-09-2009, 10:58 PM

Payment sent.
Thanks.

stealthy '69 · 11-10-2009, 12:31 AM

Payment sent out to you.

sleepertruck72 · 11-10-2009, 01:19 AM

Don't forget to include "1992 LT1 Engine must be purchased seperately, NOT included"

Cool adapter !

CheyenneShop · 11-10-2009, 01:41 AM

Payment sent, thanks - Ronnie

fatboys69 · 11-10-2009, 10:15 AM

Payment sent - THANKS FATBOY

BB72CHEVKT · 11-10-2009, 10:47 AM

Man I wish you would have posted this last week. I was installing new carpet in the 69 over the weekend and I am having to cut up the plastic part on the driver side for the gas pedal pegs. It is no easy task to do and I hope when I am finished it looks decent. This jewel would have saved the day and been a much cleaner look than what mine will probably turn out to be.

Rokcrln · 11-10-2009, 11:30 AM

Quote:

Originally Posted by BB72CHEVKT

Man I wish you would have posted this last week. I was installing new carpet in the 69 over the weekend and I am having to cut up the plastic part on the driver side for the gas pedal pegs. It is no easy task to do and I hope when I am finished it looks decent. This jewel would have saved the day and been a much cleaner look than what mine will probably turn out to be.

Sorry I will try not to slack so much in the future

Kevin
LFD Inc.

lts70 · 11-10-2009, 12:22 PM

I am wanting to put the newer style petal in my 70. Do you have a picture of what comes in the kit? I am not seeing what it actualy is in your picture, but if i need it to switch out pedals.... it will be mine!

sdailey · 11-10-2009, 12:41 PM

Payment sent Kevin.

Thanks!

Sinister · 11-10-2009, 01:34 PM

Payment sent. Thanks.

11-09-2009, 09:11 PM	#1
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	LFD's gas pedal adapters (71-72 gas pedals in 67-70's) LFD's Gas pedal adapters for 67-70 chevy's Like most of us with 67-70's the one down fall is the gas pedal linkage rods. I personally had had a few over the years that have self accelerated when the motor would lift as the chassis flexed, not real fun. So over the years I always like to install the 71-72 cable style gas pedal and now you can too as a bolt in unit! All you need to supply is the 71-72 gas pedal and what ever kind of cable that best suits your needs. Wether it is a stock SB,BB with a carb or a newer LT1,LSX style with injection this is the way to go. It gives more room behind the motor and cleans up the fire wall at the same time. This kit is designed to allow you to fill the 3 bolt holes in the firewall were the old pedal mounted and still use the weld nuts on the inside of the fire wall for the new mount plate. All you have to do is drill one hole for the cable to exit and hit the road. Install time is approximately 1-2 hours depending on how well you bend under the dash. If the engine bay is empty figure on 30 mins and you will be done. Here are a few pics with the 71-72 set up in a 68 that I did for a customer who wanted everything cleaned up and wanted the safer cable style linkage at the same time. The adapter kit includes the adapter plate, hardware and instructions. The price shipped in the USA is $35 total (this includes shipping and tax) Kevin LFD Inc. Lines up with the stock location of the floor mounted pedal. [IMG][/IMG] Can be sued with the stock 71-72 cable. [IMG][/IMG] Notice the mounting holes are gone! [IMG][/IMG] A few minutes with a 1/2" drill and a small flat file and you are ready to go. Note a lot of the newer cables just use a round hole so it is even less work but the square hole only took about 5 minutes once the 1/2" hole was drilled. [IMG][/IMG] Here is my 70 SWB LowBuck with a 92 LT1 and my pedal conversion with over 16,000 miles so far. [IMG][/IMG] Last edited by 70LonghornCST; 04-07-2015 at 06:04 PM. Reason: removal of paypal link; member not currently subscribed

11-09-2009, 09:21 PM	#2
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Kevin you're a mind reader. I'm doing this very install in my '69. I'm in for one of your kits when you get everything setup. Thanks. __________________ Shannon

11-09-2009, 09:45 PM	#4
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) That rocks. Count me in. Are the '72 pedal assemblies repopped? __________________ Beat it to fit, Paint it to match...

11-09-2009, 09:46 PM	#5
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) just waitin on paypal info GOTTA AVE ONE !!!! SLICK !!!!!!!! MAN YOU DO NICE WORK !!!!!

11-09-2009, 09:51 PM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Kevin,... count me in also. Send me a PM when you have your Paypal account set up. Thanks. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-09-2009, 09:58 PM	#7
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Hmmmm, who knew? I always liked the 67-70 rods better. Never would have thought about adding a cable setup to a truck. Good job on it though. Hope you sell a bunch. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

11-09-2009, 10:06 PM	#9
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Paypal sent. R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-09-2009, 10:29 PM	#10
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) PayPal link is up! Click here I think I will have a busy day Tuesday Kevin LFD Inc.

11-09-2009, 10:36 PM	#14
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Paypal sent!!!....Thanks Kevin! __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

11-09-2009, 10:58 PM	#16
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Payment sent. Thanks. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-10-2009, 01:19 AM	#18
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Don't forget to include "1992 LT1 Engine must be purchased seperately, NOT included" Cool adapter ! __________________ 72 C20 Longbed 05 1500 Z71

11-10-2009, 01:41 AM	#19
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Payment sent, thanks - Ronnie __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

11-10-2009, 10:15 AM	#20
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Payment sent - THANKS FATBOY

11-10-2009, 10:47 AM	#21
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Man I wish you would have posted this last week. I was installing new carpet in the 69 over the weekend and I am having to cut up the plastic part on the driver side for the gas pedal pegs. It is no easy task to do and I hope when I am finished it looks decent. This jewel would have saved the day and been a much cleaner look than what mine will probably turn out to be. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 Last edited by BB72CHEVKT; 11-10-2009 at 10:48 AM. Reason: add info

11-10-2009, 12:22 PM	#23
lts70 1970 Daily Driver Join Date: Jun 2007 Location: Glenns Ferry IDAHO Posts: 1,038	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) I am wanting to put the newer style petal in my 70. Do you have a picture of what comes in the kit? I am not seeing what it actualy is in your picture, but if i need it to switch out pedals.... it will be mine! __________________ It's not truly yours if you didn't build it yourself or if you don't do your own maintenance.



Register or Log In To remove these advertisements.

11-10-2009, 12:41 PM	#24
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Payment sent Kevin. Thanks! __________________ Shannon

11-10-2009, 01:34 PM	#25
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Payment sent. Thanks. __________________ Beat it to fit, Paint it to match...

Register or Log In To remove these advertisements.