Caddy install help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 11-12-2009, 10:39 AM

Well I had a bunch of pictures saved for future reference, but I seem to have lost/misplaced them.

I had all of Andy's (Longhorn Man) and a bunch from Al (IAFF2407). I went to check Andy's web page again and the page is no longer available. I talked to him via PM and he wasnt sure if he had the pics saved anywhere.

So does anyone else have them? Even close up pics of your own install would be great.

I tried to sell my Caddy 500/400 combo and had zero bites so instead of just letting the stuff sit there I may as well use em.

Thanks for any and all input.

CG · 11-12-2009, 09:53 PM

Anyone...Bueller?

Jayss109 · 11-12-2009, 09:57 PM

I have a few on my website.

See linky below

Jason

jeffspower · 11-12-2009, 09:59 PM

What are you putting it in? 4x4? I have a few pics of my 4x4 install, but could take more of specifics if you want.

68C15 · 11-12-2009, 11:32 PM

you don't want a 500 in there. stick with a SBC. you can always ship the 500/400 combo to me. I'll keep it warm and dry.

**LockDoc** · 11-12-2009, 11:36 PM

Quote:

Originally Posted by 68C15

you don't want a 500 in there. stick with a SBC. you can always ship the 500/400 combo to me. I'll keep it warm and dry.

No you won't... you'll put it in your boat and get it all wet. Fibber..

LockDoc

CG · 11-13-2009, 12:04 AM

Back to sticking it my panel...C10

eric67m · 11-13-2009, 08:36 AM

Just dont tell us that you are going to power your two caddies with small block chevys!

suville · 11-13-2009, 08:41 AM

I've got pic of my install. email me and I'll send em to ya. This can be a bolt in deal using all GM parts, you will need to massage the firewall a bit for head clearance tho. and you wont regret going with the big Cad!

jeffspower · 11-13-2009, 06:44 PM

Here's an old thread of mine showing the firewall mod I done for "trans in the 4x4 position". You will find that if you run stock exhaust manifolds the right manifold clears the frame like it was made for it in this position. If you go further forward, I think you have to put the engine up higher, or trim the frame a bit. I believe a 2wd would be similar clearance- wise.

http://67-72chevytrucks.com/vboard/s...d.php?t=245192

eric67m · 11-13-2009, 09:32 PM

Didnt Livrat (mark) do IAFF247 (al's) swap. Maybe mark has pictures?

CG · 11-14-2009, 02:25 AM

Thanks for the info so far guys...Yeah Eric Im going to have to PM those guys. And down to one Caddy...the purple 56 is in Cali now.

11-12-2009, 10:39 AM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,845	Caddy install help Well I had a bunch of pictures saved for future reference, but I seem to have lost/misplaced them. I had all of Andy's (Longhorn Man) and a bunch from Al (IAFF2407). I went to check Andy's web page again and the page is no longer available. I talked to him via PM and he wasnt sure if he had the pics saved anywhere. So does anyone else have them? Even close up pics of your own install would be great. I tried to sell my Caddy 500/400 combo and had zero bites so instead of just letting the stuff sit there I may as well use em. Thanks for any and all input.

11-12-2009, 09:53 PM	#2
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,845	Re: Caddy install help Anyone...Bueller?

11-12-2009, 09:57 PM	#3
Jayss109 Active Member Join Date: May 2005 Location: San Jose, CA Posts: 235	Re: Caddy install help I have a few on my website. See linky below Jason __________________ Cadillac Powered

11-12-2009, 09:59 PM	#4
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Caddy install help What are you putting it in? 4x4? I have a few pics of my 4x4 install, but could take more of specifics if you want. __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

11-12-2009, 11:32 PM	#5
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Caddy install help you don't want a 500 in there. stick with a SBC. you can always ship the 500/400 combo to me. I'll keep it warm and dry.

11-13-2009, 12:04 AM	#7
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,845	Re: Caddy install help Back to sticking it my panel...C10

11-13-2009, 08:36 AM	#8
eric67m Registered User Join Date: Apr 2005 Location: Monroe, WA Posts: 298	Re: Caddy install help Just dont tell us that you are going to power your two caddies with small block chevys! __________________ 67 K10, lwb, fleetside, 327, 4spd, 205, cab and 3/4 frame swap, 14 bolt, big window, and a "rustoleum roll job"

11-13-2009, 08:41 AM	#9
suville Registered User Join Date: Jun 2003 Location: Mtn. Home, Idaho Posts: 906	Re: Caddy install help I've got pic of my install. email me and I'll send em to ya. This can be a bolt in deal using all GM parts, you will need to massage the firewall a bit for head clearance tho. and you wont regret going with the big Cad!

11-13-2009, 06:44 PM	#10
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Caddy install help Here's an old thread of mine showing the firewall mod I done for "trans in the 4x4 position". You will find that if you run stock exhaust manifolds the right manifold clears the frame like it was made for it in this position. If you go further forward, I think you have to put the engine up higher, or trim the frame a bit. I believe a 2wd would be similar clearance- wise. http://67-72chevytrucks.com/vboard/s...d.php?t=245192 __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

11-13-2009, 09:32 PM	#11
eric67m Registered User Join Date: Apr 2005 Location: Monroe, WA Posts: 298	Re: Caddy install help Didnt Livrat (mark) do IAFF247 (al's) swap. Maybe mark has pictures? __________________ 67 K10, lwb, fleetside, 327, 4spd, 205, cab and 3/4 frame swap, 14 bolt, big window, and a "rustoleum roll job"

11-14-2009, 02:25 AM	#12
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,845	Re: Caddy install help Thanks for the info so far guys...Yeah Eric Im going to have to PM those guys. And down to one Caddy...the purple 56 is in Cali now.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.