Rear Sway Bar Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mike76251 · 04-17-2003, 05:24 AM

I was thinking about a bar for my '84 1/2 ton and need to know how close to the rear cover most of them run.
I had to relocate the spare and it is about two inches from the cover now.
Do these bars line up with the center of the cover or are they offset at all.
Thanks for any comments,
Mike

knucklebuster · 04-18-2003, 08:54 PM

I'm not sure about where they line up at but if it helps i remember someone the oyher day showing taking a sway bar from a camaro and using it.You may want to try a search .It had plenty of pics with it.

ocbaud · 04-18-2003, 10:18 PM

my hellwig bar goes underneth my axle(over it if its not lowered as much as mine)

Mike76251 · 04-19-2003, 05:02 AM

Thanks much Guys,
I have about ten feet of hot-rolled steel laying out there.
It is just begging to be made into a bar.
It is 1 1/5" stuff.........I won't even have to heat treat it!
Oh well.....another project.

04-17-2003, 05:24 AM	#1
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,500	Rear Sway Bar Question I was thinking about a bar for my '84 1/2 ton and need to know how close to the rear cover most of them run. I had to relocate the spare and it is about two inches from the cover now. Do these bars line up with the center of the cover or are they offset at all. Thanks for any comments, Mike

04-18-2003, 08:54 PM	#2
knucklebuster Failure is NOT an option! Join Date: Feb 2003 Location: greenwood s.c. Posts: 811	I'm not sure about where they line up at but if it helps i remember someone the oyher day showing taking a sway bar from a camaro and using it.You may want to try a search .It had plenty of pics with it. __________________ House payment or truck parts?????.........why does life have to be so complicated? 1969 Chevy Shortbed Fleetside 1969 Camaro ps pb a/c(drove in high school now it's just a yard ornament,but it's next on the list for resto) 1990 Ni$$an hardbody( daily beater that has been really beaten!) 1999 Grand Am GT(wifes ride...never buy a pontiac!!Trust Me)

04-18-2003, 10:18 PM	#3
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	my hellwig bar goes underneth my axle(over it if its not lowered as much as mine)

04-19-2003, 05:02 AM	#4
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,500	Thanks much Guys, I have about ten feet of hot-rolled steel laying out there. It is just begging to be made into a bar. It is 1 1/5" stuff.........I won't even have to heat treat it! Oh well.....another project.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.