What did you get done 11/22/2009 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 11-22-2009, 06:00 PM

I didnt do a dern thing truck related except for trying to locate a couple of parts. My project is kinda parked for winter anyway how about you all?

Also let me take this opportunity to wish each of you a very happy thanksgiving and heres to hoping that those who are travelling have a safe trip and those who are hosting friends or family have a wonderful time together

Scootin 81 C20 · 11-22-2009, 06:09 PM

I didn't get much done either Bob. I did however rotate my tires on Friday.

westie 666 · 11-22-2009, 06:53 PM

Nothing much done Saturday, but Sunday pulled the old 350 for a complete rebuild.

S10Fan · 11-22-2009, 07:18 PM

I had an awesome weekend! Drove the Heap across the state to visit my brother and sister in law. On the way back I stopped in Charlottesville Va and met fellow board member "Sluggish" (Will) for a burger, fries, coke and some bench racing.

Will and I decided that Charlottesville would be a great central location for a future meet of forum members. Well, members in the Va, NC, MD, W VA, PA region, and of course anyone else that wants to make the trip.

Seriously, we could plan a spring '10 meet, nothing formal, just a casual weekend of fellowship and lots of bench racing.

bluex · 11-22-2009, 07:24 PM

I only had one night off this weekend so I stayed on the third shift schedule and showed my '78 some love.

New parts:

Temp sender, which i hope fixes the problem, wiring is good so I'll be hunting a gauge if it dosent

Blower motor and wheel, should have changed this 5 yrs ago.

1 1/16" Swaybar with ECE frame brackets. I've had this for about 5 yrs.

New to it black seatbelts had these for about 5 yrs too.

Also did a oil change and service, but ran out of grease as I did the upper ball joints, so I'll have to finish the rest of that later.

I cleaned up the underside of the engine as it has an oil leak, only when its running that I cant track down. It looks to be maybe a combo of the pass side valve cover and the timing cover. I was gonna drive it today, but the rain put a stop to that.

bigblock79 · 11-22-2009, 07:27 PM

i was not able to do nothing this weekend but hopeing i get my new swb 4x4 home this weekend

ghettoluxury · 11-22-2009, 07:41 PM

Started the Right Hand Drive Conversion

whiskeydented · 11-22-2009, 07:41 PM

I cut up an 87 2wd and a 78 4x4 to make room at work for all the snow piles when they hopefully never come.

81shortstep · 11-22-2009, 08:29 PM

i welded new ends onto my rear end and built some fuel tank and pump mounts
Name: rear 1.jpg
Views: 260
Size: 70.8 KB

Name: tank mounts.jpg
Views: 267
Size: 50.6 KB

Justins76 · 11-22-2009, 08:44 PM

Got my seats done, new cowl weatherstripping and my windshield washer working.

ROLLIN' TOPLEZZ · 11-22-2009, 09:30 PM

Spent the day pulling parts in the junkyard, got the gas door and filler neck from a blazer. Also got wiring for my power doors from a suburban.

78-5.3 · 11-22-2009, 09:59 PM

Quote:

Originally Posted by ghettoluxury

Started the Right Hand Drive Conversion

thats cool that is my next project im from AUSTRALIA origanally and have already located a few right hand drive parts

78-5.3 · 11-22-2009, 10:02 PM

i polished my truck it was painted in 1993 and never cut and polished

mwooten92 · 11-22-2009, 10:13 PM

Got alot done on the ole 85' this weekend. worked all day saturday and sunday

-got the rollpan welded on the bed.
-put license plate lights in it.
-reworked the cab corners to fit the rollpan.
-modified the flowmaster exaust into turn downs before the rear axle
-put new rear shocks on.

here for pics http://67-72chevytrucks.com/vboard/s...=367919&page=2

07SSSC · 11-22-2009, 10:18 PM

Nothin, got 2"-3" of snow this morning. Wiped some snow off the cowl area (it was snowing sideways under the carport) and that was all I did to it all weekend. I think winter is here.

ghettoluxury · 11-22-2009, 10:31 PM

Quote:

Originally Posted by 78-5.3

thats cool that is my next project im from AUSTRALIA origanally and have already located a few right hand drive parts

Thanks and what Right hand drive parts do you have? I think I am going to use a steering box from an 88-98 since they bolt to the inside of the frame.

hot trux · 11-22-2009, 11:02 PM

Got the rear fenders sanded, buffed and installed Name: fender rear.jpg
Views: 254
Size: 40.9 KB

78-5.3 · 11-22-2009, 11:05 PM

Quote:

Originally Posted by ghettoluxury

Thanks and what Right hand drive parts do you have? I think I am going to use a steering box from an 88-98 since they bolt to the inside of the frame.

back home in OZ i have a 73 -80 dash they are fiberglass ! steering column ; heater box , steering parts , oh right hand wiper set up other stuff i will have too see when i get back home for a visit in feb i go back once some time twice a year!!

**lolife99** · 11-22-2009, 11:16 PM

Quote:

Originally Posted by hot trux

Got the rear fenders sanded, buffed and installedAttachment 516511

Jeff,... love the stepside fenders on it!
I can't wait to see it in person.

ghettoluxury · 11-22-2009, 11:44 PM

Quote:

Originally Posted by 78-5.3

back home in OZ i have a 73 -80 dash they are fiberglass ! steering column ; heater box , steering parts , oh right hand wiper set up other stuff i will have too see when i get back home for a visit in feb i go back once some time twice a year!!

Cool, didn't know they ever made a right hand dash.

GMC91 · 11-23-2009, 12:05 AM

Got the rest of my frame brackets off, ready for stripping down and panting now.

SCOTI · 11-23-2009, 12:23 AM

Worked 7a - 12a Fri.
Worked 7a - 5:30p Sat.
Worked 7a - noon today. Notice the theme? I did play around for a few mins mocking up the seats going into my 64 project . . ....

bagged74 · 11-23-2009, 12:45 AM

changed the engine in the 2wd Blazer i picked up last week. hopefully be driving it next week.

bigblock73 · 11-23-2009, 12:57 AM

Quote:

Originally Posted by SCOTI

Worked 7a - 12a Fri.
Worked 7a - 5:30p Sat.
Worked 7a - noon today. Notice the theme? I did play around for a few mins mocking up the seats going into my 64 project . . ....

Scoti, details on the seats please.

78-5.3 · 11-23-2009, 06:46 AM

Quote:

Originally Posted by ghettoluxury

Cool, didn't know they ever made a right hand dash.

yup mostly 77-80 the C-50 was a big thing over there too i rode to work in one every day!!!

11-22-2009, 06:00 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	What did you get done 11/22/2009 edition I didnt do a dern thing truck related except for trying to locate a couple of parts. My project is kinda parked for winter anyway how about you all? Also let me take this opportunity to wish each of you a very happy thanksgiving and heres to hoping that those who are travelling have a safe trip and those who are hosting friends or family have a wonderful time together __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-22-2009, 06:09 PM	#2
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: What did you get done 11/22/2009 edition I didn't get much done either Bob. I did however rotate my tires on Friday. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

11-22-2009, 06:53 PM	#3
westie 666 Registered User Join Date: Mar 2008 Location: AUCKLAND NZ Posts: 264	Re: What did you get done 11/22/2009 edition Nothing much done Saturday, but Sunday pulled the old 350 for a complete rebuild. __________________ 77 Cheyenne no longer in bits

11-22-2009, 07:18 PM	#4
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: What did you get done 11/22/2009 edition I had an awesome weekend! Drove the Heap across the state to visit my brother and sister in law. On the way back I stopped in Charlottesville Va and met fellow board member "Sluggish" (Will) for a burger, fries, coke and some bench racing. Will and I decided that Charlottesville would be a great central location for a future meet of forum members. Well, members in the Va, NC, MD, W VA, PA region, and of course anyone else that wants to make the trip. Seriously, we could plan a spring '10 meet, nothing formal, just a casual weekend of fellowship and lots of bench racing. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

11-22-2009, 07:24 PM	#5
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Re: What did you get done 11/22/2009 edition I only had one night off this weekend so I stayed on the third shift schedule and showed my '78 some love. New parts: Temp sender, which i hope fixes the problem, wiring is good so I'll be hunting a gauge if it dosent Blower motor and wheel, should have changed this 5 yrs ago. 1 1/16" Swaybar with ECE frame brackets. I've had this for about 5 yrs. New to it black seatbelts had these for about 5 yrs too. Also did a oil change and service, but ran out of grease as I did the upper ball joints, so I'll have to finish the rest of that later. I cleaned up the underside of the engine as it has an oil leak, only when its running that I cant track down. It looks to be maybe a combo of the pass side valve cover and the timing cover. I was gonna drive it today, but the rain put a stop to that. __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

11-22-2009, 07:27 PM	#6
bigblock79 67 Chevy Stepside Join Date: Mar 2007 Location: Jonesville NC Posts: 836	Re: What did you get done 11/22/2009 edition i was not able to do nothing this weekend but hopeing i get my new swb 4x4 home this weekend __________________ 1967 Chevy stepside 1976 BIG DOOLEY 454 turbo 400 4:11

11-22-2009, 07:41 PM	#7
ghettoluxury Registered User Join Date: Apr 2009 Location: Waynesfield Ohio Posts: 1,991	Re: What did you get done 11/22/2009 edition Started the Right Hand Drive Conversion __________________ 1949 Five Window, 1973 Step Side, 2000 Z71

11-22-2009, 07:41 PM	#8
whiskeydented Registered User Join Date: Dec 2006 Location: connecticut Posts: 261	Re: What did you get done 11/22/2009 edition I cut up an 87 2wd and a 78 4x4 to make room at work for all the snow piles when they hopefully never come.

11-22-2009, 08:29 PM	#9
81shortstep Registered User Join Date: Feb 2007 Location: saskatoon,canada Posts: 51	Re: What did you get done 11/22/2009 edition i welded new ends onto my rear end and built some fuel tank and pump mounts __________________ 81 gmc short box stepside(rebuild in progress) 09 mitsubishi lancer gt

11-22-2009, 08:44 PM	#10
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	Re: What did you get done 11/22/2009 edition Got my seats done, new cowl weatherstripping and my windshield washer working. __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!

11-22-2009, 09:30 PM	#11
ROLLIN' TOPLEZZ Registered User Join Date: Jun 2009 Location: L.A. CA. Posts: 111	Re: What did you get done 11/22/2009 edition Spent the day pulling parts in the junkyard, got the gas door and filler neck from a blazer. Also got wiring for my power doors from a suburban.

11-22-2009, 10:02 PM	#13
78-5.3 Registered User Join Date: Oct 2009 Location: Waterboro ,MAINE Posts: 547	Re: What did you get done 11/22/2009 edition i polished my truck it was painted in 1993 and never cut and polished Attached Images

11-22-2009, 10:13 PM	#14
mwooten92 Registered User Join Date: Jul 2009 Location: Memphis Posts: 336	Re: What did you get done 11/22/2009 edition Got alot done on the ole 85' this weekend. worked all day saturday and sunday -got the rollpan welded on the bed. -put license plate lights in it. -reworked the cab corners to fit the rollpan. -modified the flowmaster exaust into turn downs before the rear axle -put new rear shocks on. here for pics http://67-72chevytrucks.com/vboard/s...=367919&page=2

11-22-2009, 10:18 PM	#15
07SSSC Registered User Join Date: Apr 2009 Location: Buhl, ID Posts: 288	Re: What did you get done 11/22/2009 edition Nothin, got 2"-3" of snow this morning. Wiped some snow off the cowl area (it was snowing sideways under the carport) and that was all I did to it all weekend. I think winter is here. __________________ '69 Chevy C/10-under reconstruction -- '68 C20 Camper 50th Anniversary-runs, but sorely needs a resto -- '07 Cobalt SS/SC-very fun DD -- '93 Chevy K2500-LQ4/4L80E swap -- '84 Trans Am-awaiting (LS) drivetrain -- '00 Trans Am-road tripper -- '06 Z06-577 WHP beast

11-22-2009, 11:02 PM	#17
hot trux '85 Stepside Join Date: Jan 2006 Location: montgomery city mo. Posts: 360	Re: What did you get done 11/22/2009 edition Got the rear fenders sanded, buffed and installed Last edited by hot trux; 11-22-2009 at 11:04 PM. Reason: spelling



Register or Log In To remove these advertisements.

11-23-2009, 12:05 AM	#21
GMC91 Always trouble Join Date: Jul 2009 Location: Hartsellle, Al Posts: 1,111	Re: What did you get done 11/22/2009 edition Got the rest of my frame brackets off, ready for stripping down and panting now. __________________ 91 Silverado Regular cab, 2wd, swb-project truck 97 Silverado Extended cab, 2wd, swb-driver

11-23-2009, 12:23 AM	#22
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: What did you get done 11/22/2009 edition Worked 7a - 12a Fri. Worked 7a - 5:30p Sat. Worked 7a - noon today. Notice the theme? I did play around for a few mins mocking up the seats going into my 64 project . . .... Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-23-2009, 12:45 AM	#23
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: What did you get done 11/22/2009 edition changed the engine in the 2wd Blazer i picked up last week. hopefully be driving it next week.

Register or Log In To remove these advertisements.