|
04-08-2010, 07:32 PM | #1 |
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: My 63 farm truck build thread
I finished the rack today. One thing I can guarantee you is that it is plumb and square. I did struggle with some of the welds though. I did the project outside and there was a periodic breeze to give me issues while welding. Plus I ran out of .023 wire in my smaller welder so I had to pull out the Millermatic 250, which has .035 wire in it plus a big, cumbersome gun. I should have just went and bought another spool of .023 and continued to use the smaller Lincoln machine. But, never the less, it's finished.
I have taken some flak for the tool box, and rightfully so. It's too clean looking. To help with that I did the entire project without covering the box. All of the weld boogers and splatter landed on the box. Plus I stood on top of it in my big old boots while welding the top of the rack. I'd say the tool box is aging nicely after that. I did pull the Tractor Supply emblems off of it too. If the newness of the box continues to wear on me I will strip the powdercoat off of it and give it some artificial aging. And, I have decided not to paint the rack. I want mother nature to add some character to it and make it match the truck better. Awful pictures... For the fellow who asked for pics of the angled posts. I just held the first one in place and tweaked it until it flowed with the cab when viewed from behind. That was 8 degrees canted in. So, I set the saw at 8 degrees and sliced each post to give it that cool gangster lean look. Front, I built it as low to the cab as I dared and still allow for frame flex and cab movement. Look, my truck has a telephone post growing out of the cab roof. Sorry for the poor pictures. I must be pretty tired or something.
__________________
I'm on the Instagram- @Gearhead_Kevin |
04-08-2010, 08:11 PM | #2 |
Account Suspended
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
|
Re: My 63 farm truck build thread
Congrats on TOTM.
Photos are great and the rack fits the theme. Thanks for sharing and keep us posted on your next improvement. |
04-08-2010, 08:30 PM | #3 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: My 63 farm truck build thread
If I find a good old vintage one in my junkyard therapy times I might just snag it for you...
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-08-2010, 10:03 PM | #4 |
Registered User
Join Date: Jun 2006
Location: Indiana
Posts: 4,859
|
Re: My 63 farm truck build thread
The "smaller Lincoln machine," what size is it? I am considering the SP-140 or the SP-180. It sounds like you like the smaller unit better than the larger welder, so I would like to know why. Just collecting information.
__________________
'70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60 |
04-08-2010, 10:09 PM | #5 |
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: My 63 farm truck build thread
My Lincoln is about 15 years old. It's a 120 amp machine.
I also have a big Millermatic 250 amp machine. For almost all jobs, the Lincoln does what I need. It has a small gun which is easy to get into tight areas. I keep it loaded with .023 wire. It's so easy to use on most anything automotive. I can sew just about anything together with it. The big Miller can weld 1/2 inch plate in one pass. It's an absolute monster. It's ideal for heavy duty fab work like frame splices, building trailers, etc. I keep it loaded with .035 wire. It's not that great for thin stuff like this 14ga on this project. Plus the big gun is impossible to get into tight areas. In my shop, I have a place for each of them, but for old trucks, the little Lincoln is tops.
__________________
I'm on the Instagram- @Gearhead_Kevin |
04-08-2010, 11:41 PM | #6 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,997
|
Re: My 63 farm truck build thread
Tx... I've got a Hobart (Miller) Airforce 625 plasma you can use if you're itchin' to start sooner.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
04-27-2010, 09:10 AM | #7 | |
Registered User
Join Date: Apr 2008
Location: Md
Posts: 2,478
|
Re: My 63 farm truck build thread
Quote:
|
|
04-09-2010, 07:09 AM | #8 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: My 63 farm truck build thread
the finished product looks very nice Kevin!
__________________
CHEVY ONLY |
04-09-2010, 10:09 AM | #9 |
I'M TRUCK CRAZY!
Join Date: Oct 2006
Location: Sachse, TEXAS
Posts: 1,737
|
Re: My 63 farm truck build thread
Looks really good. Thanks for the pic from the back. Now we need to see it in action.
|
04-09-2010, 03:10 PM | #10 |
Registered User
Join Date: Jun 2006
Location: Indiana
Posts: 4,859
|
Re: My 63 farm truck build thread
Kevin, so do you think the SP-140 will be fine for most of my truck needs? Body panels, and stuff like that.
__________________
'70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60 |
04-09-2010, 03:40 PM | #11 | |
Senior Member
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 63 farm truck build thread
Quote:
I sold it and bought a Hobart 170 220v machine and it too is an excellent unit, the gun on the Lincoln was better and smaller than the Hobart but I changed the gun to a tweeco gun |
|
04-09-2010, 08:05 PM | #12 |
Registered User
Join Date: Jun 2006
Location: Indiana
Posts: 4,859
|
Re: My 63 farm truck build thread
Looks like I will be scraping money together for an SP-140.
__________________
'70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60 |
04-09-2010, 03:32 PM | #13 |
Registered User
Join Date: May 2008
Location: 505
Posts: 447
|
Re: My 63 farm truck build thread
Rack looks great! Excellent work as usual.
__________________
'68 SWB Fleetside '98 K1500 Silverado |
04-10-2010, 07:32 AM | #14 |
UCA63
Join Date: Aug 2005
Location: Lloydminster AB Can.
Posts: 1,637
|
Re: My 63 farm truck build thread
That turned out awesome Kevin,it absolutely fits theme and period
Like Lake said,or even do your faux finish over the pc on your toolbox. Are you considering any additional signage? like maybe a 1x6 plank just under the top main frame, that might look neat (tho' it dos look great just like it is). T
__________________
member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d) |
04-10-2010, 03:27 PM | #15 |
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: My 63 farm truck build thread
I've started to gather parts for some changes.
I got a different style of grille at the swap meet yesterday. It's different than you might think. I'm going to try age it a bit and swap it in to the truck. Different wheels coming soon too. I'm also trying to pin down an ongoing engine issue. It's been giving me issues since day 1. I just ordered from Summit hoping that I have guessed right on the problem. Pics of grille soon. Pics of wheels once installed.
__________________
I'm on the Instagram- @Gearhead_Kevin |
04-10-2010, 09:49 PM | #16 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: My 63 farm truck build thread
Truck looks good as always Kevin. any hint on the grill?
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
04-13-2010, 07:51 AM | #17 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: My 63 farm truck build thread
bump for the anticipation of new parts
__________________
CHEVY ONLY |
04-14-2010, 07:49 PM | #18 |
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: My 63 farm truck build thread
I spent the afternoon fixing the truck. It's been fouling the spark plugs on all 8 cylinders and generally running awful.
When I removed the carburetor there was a lot of sludge inside the intake manifold on both sides of the divider. Since this is my only means of transportation now, I had to fix it no matter what. So, I ordered a new intake manifold from Summit and it arrived today. My old intake that I like so much is cracked internally and sucking exhaust from the crossover port up into the plenum to be burned in the engine. So, I put an Edelbrock Performer RPM on it. I didn't take pictures of any of it though. You've all seen new intake manifolds a million times without me adding another picture.
__________________
I'm on the Instagram- @Gearhead_Kevin |
04-14-2010, 08:02 PM | #19 |
Real Projects never die
Join Date: Jan 2007
Location: Lawrence, kansas
Posts: 1,508
|
Re: My 63 farm truck build thread
Dude, ive never seen a new intake before!
Wait, just got a sbc edelbrock preformer RPM air gap in the mail yesterday for the camaro... Loving the truck man, the rack looks perfect. Then again, im a fan of "Work" trucks, i dont like anything that cant be used.
__________________
Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums
|
04-15-2010, 02:56 PM | #20 |
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: My 63 farm truck build thread
Plugged away at a few more issues that have been plaguing the truck.
First, very excessive oil consumption and plug fouling. Compression is good and there in no blow by. This one took awhile for me to figure out, but it looks like my beloved Edelbrock C3Bx intake is warped. Since this is my only driver I had to fix it quick so I took the cheesy way out and called Summit for the parts. Edelbrock Performer RPM and new gaskets. I didn't have the down time to spare to powdercoat the new intake so it's box stock bare. Wired for trailer lights and hitch ball installed. Need to be able to drag my little trailer to the swap meets ! Out with the old dirty, dingy instrument cluster... Restored extra cluster... Replaced some old bulbs... The finished product, so much nicer. I lubed the speedo cable while everything was aprt too. I picked up a grille at the swap last weekend I am toying with. It's a big truck grille. Since this picture I have already removed the "Chevrolet" from the top of the grille so it will fit a small truck like mine. I'm a bit on the fence about this as I really like 63 grilles like I have now. If I decide to not run it on my truck it will still be a cool conversation piece for the shop wall. I'm open to suggestions about the grilles though !
__________________
I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 04-15-2010 at 03:42 PM. |
04-15-2010, 03:33 PM | #21 |
VA72C10
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: My 63 farm truck build thread
Hope that solved your problems.
Gauges look great! Man, the grille would look cool on the wall with the lights wired up. I would have liked it with the chevrolet still on it though. I really like the front of your truck as is.
__________________
Looking for a 67-72 swb or blazer project in or around VA. |
04-15-2010, 03:42 PM | #22 |
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: My 63 farm truck build thread
The Chevrolet part is just held on by 4 rivets. If I decide to wall mount it I will definitely put the emblem back onto the grille.
I already have one extra grille on the wall now.
__________________
I'm on the Instagram- @Gearhead_Kevin |
04-15-2010, 03:48 PM | #23 |
VA72C10
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: My 63 farm truck build thread
Cool. I have two GMC grilles hanging from the I-beam in my garage and a wiper cowl , emblems, and some extra dash bezels on the pegboard
__________________
Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 04-15-2010 at 03:48 PM. |
04-15-2010, 09:15 PM | #24 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: My 63 farm truck build thread
what if you put the chevrolet between the two rails. Wonder what it would look like.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
04-16-2010, 01:14 PM | #25 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: My 63 farm truck build thread
I like the new (unique) grille. Kind of wonder what the metal mesh from a BBG type grill would look recessed in the bottom opening about an inch behind the bowtie.
I like it though...
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) Last edited by Primered_69; 04-16-2010 at 01:14 PM. |
Bookmarks |
|
|