New member from washington - The 1947 - Present Chevrolet & GMC Truck Message Board Network

IronAudi · 11-24-2009, 04:48 AM

Hi all, robert here gmc newb. After many years on working with non american stuff i'm finally back into some american made fun. I just picked up a 77 swb bbc gmc 2 weeks ago as a work in progress truck and cant wait to get it to where i want it. im currently in puyallup wa and am interested in the local meets and discussions. here is a little info on my truck.
Black primed 1977 SWB BBC
454
complete rebuild
30 over
all arp hard wear
forged crank
100.9cc closed chamber large oval port heads
heads were redone with all new valves, and hardened exhaust seats
hardened pushrods
Crane lifters, and Crane aluminum roller rockers
Crane Energizer 274H06 cam that is .513 lift int./exh
pete jackson gear drive
MSD cap and rotor
Holley 750 vac. secondary carb
edelbrock performer RPM intak
high volume oil pump
hooker super comp headers
3inch duel super 44 flowmaster with pre axel dumps
TH-400 trans with a new converter and stock stall
new high flow Radiator
it has a 12 bolt rear end
for the most part the truck need allot of work , i'm peacing the interior back together as it was bare when i got it, body it pretty much rust free but need allot of attention as with alot of the little chrome features, just pulled out the old slider back window and put in a solid. Picked up a couple of good doors to install, replaced the steering column , basically parting the interior back together as it didn't have anything but a seat and a steering wheel..lol I think the rear end needs to be changed as i cant do much more than 60 on the freeway or the rpms are way to high.
I also took of the wheels it came with a put on some wheels i got from a guy down the road,,, I like the wheel style but maybe in a bigger size, but i,ll wait till i drop her down a little bit first. So by next summer i hope to have all the body work done and new paint layed down. And that's about it. see you all around the forums.

ROBERT

SOME BEFORE
PICS OF WHEN I PICKED THE TRUCK UP

SOME CURRENT PICS
FOUND SOME USED INTERIOR PEICES AND INTSALLED

FRONT END RE FITMENTS

MY FLOWMASTER SET UP, STILL NEED TO COAT THEM.

OVERALL LOOK SO FAR, SO MUCH WHEEL WELL GAP ITS KILLIN ME..LOL

70cstjr · 11-24-2009, 10:06 AM

welcome to the site..its great to have another square body around..looks like you have alot of fun work ahead of you..if you have any question there are alot of people that would love to help you

**old Rusty C10** · 11-24-2009, 04:56 PM

welcome to the site

bruceman1968 · 11-24-2009, 08:51 PM

nice truck, welcome to the site....

IronAudi · 11-28-2009, 10:49 PM

Thanks for the warm welcome guys..

mixermike · 11-29-2009, 10:06 AM

welcome brother

11-24-2009, 04:48 AM	#1
IronAudi Registered User Join Date: Nov 2009 Location: Puyallup WA Posts: 0	New member from washington Hi all, robert here gmc newb. After many years on working with non american stuff i'm finally back into some american made fun. I just picked up a 77 swb bbc gmc 2 weeks ago as a work in progress truck and cant wait to get it to where i want it. im currently in puyallup wa and am interested in the local meets and discussions. here is a little info on my truck. Black primed 1977 SWB BBC 454 complete rebuild 30 over all arp hard wear forged crank 100.9cc closed chamber large oval port heads heads were redone with all new valves, and hardened exhaust seats hardened pushrods Crane lifters, and Crane aluminum roller rockers Crane Energizer 274H06 cam that is .513 lift int./exh pete jackson gear drive MSD cap and rotor Holley 750 vac. secondary carb edelbrock performer RPM intak high volume oil pump hooker super comp headers 3inch duel super 44 flowmaster with pre axel dumps TH-400 trans with a new converter and stock stall new high flow Radiator it has a 12 bolt rear end for the most part the truck need allot of work , i'm peacing the interior back together as it was bare when i got it, body it pretty much rust free but need allot of attention as with alot of the little chrome features, just pulled out the old slider back window and put in a solid. Picked up a couple of good doors to install, replaced the steering column , basically parting the interior back together as it didn't have anything but a seat and a steering wheel..lol I think the rear end needs to be changed as i cant do much more than 60 on the freeway or the rpms are way to high. I also took of the wheels it came with a put on some wheels i got from a guy down the road,,, I like the wheel style but maybe in a bigger size, but i,ll wait till i drop her down a little bit first. So by next summer i hope to have all the body work done and new paint layed down. And that's about it. see you all around the forums. ROBERT SOME BEFORE PICS OF WHEN I PICKED THE TRUCK UP SOME CURRENT PICS FOUND SOME USED INTERIOR PEICES AND INTSALLED FRONT END RE FITMENTS MY FLOWMASTER SET UP, STILL NEED TO COAT THEM. OVERALL LOOK SO FAR, SO MUCH WHEEL WELL GAP ITS KILLIN ME..LOL Last edited by IronAudi; 10-22-2010 at 03:46 PM.

11-24-2009, 10:06 AM	#2
70cstjr Registered User Join Date: Sep 2007 Location: laura, ohio Posts: 935	Re: New member from washington welcome to the site..its great to have another square body around..looks like you have alot of fun work ahead of you..if you have any question there are alot of people that would love to help you __________________ PROJECT CIRCUIT RIDER

11-24-2009, 04:56 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: New member from washington welcome to the site __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-24-2009, 08:51 PM	#4
bruceman1968 Registered User Join Date: Oct 2009 Location: Tampa Bay Posts: 1,549	Re: New member from washington nice truck, welcome to the site....

11-28-2009, 10:49 PM	#5
IronAudi Registered User Join Date: Nov 2009 Location: Puyallup WA Posts: 0	Re: New member from washington Thanks for the warm welcome guys..

11-29-2009, 10:06 AM	#6
mixermike Registered User Join Date: Jan 2008 Location: Post Falls, Idaho Posts: 606	Re: New member from washington welcome brother



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.