The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-03-2009, 11:23 PM   #1
themargaritaman
Registered User
 
Join Date: Sep 2009
Location: Hesperia, California
Posts: 3
No tail lights!!!

Can anybody help me? I'm not a dummy when it comes to mechanics. I am having an issue with my brake lights/parking lights. During the day, when I am not using my parking lights my brake lights work. At night when I turn on my headlights and or parking lights, I have no tail lights and when I brake, my rear parking lights light up as well as my brake lights. Weird huh?? I have checked all wiring and have no shorts or exposed wiring anywhere. All the wiring in my truck has been replaced. They use to work fine before, but it has sat for 2 years and now this. Does the stop lamp switch correct this?? Everthing is hooked up correctly, and the bulbs are new! Any help would be greatly appreciated. And yes all fuses are fine and the correct size.
themargaritaman is offline   Reply With Quote
Old 12-06-2009, 11:27 AM   #2
68gmsee
Active Member
 
68gmsee's Avatar
 
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
Re: No tail lights!!!

Welcome.... from Texas.

First you want to make sure that you have good ground points on all of the metal going back to the battery. I fought weird problems with lighting for long time before I did the ground fix. Lots of old bolts lose good grounding contact.

What I did:
Ground strap from rear of truck to frame.
Ground strap from rear of cab to frame.
Ground strap from cab to engine.
Ground strap from neg post to radiator support.

I also made sure cable to engine was good and even installed another cable from engine to frame.

After that is done, then go back and check all the wiring. Lots of good wiring diagrams in the faq section of the "electrical" forum.

Last edited by 68gmsee; 12-06-2009 at 11:27 AM.
68gmsee is offline   Reply With Quote
Old 12-07-2009, 12:16 AM   #3
themargaritaman
Registered User
 
Join Date: Sep 2009
Location: Hesperia, California
Posts: 3
Re: No tail lights!!!

Okay I will try that. What is the purpose of so many positions? I'd really hate to cut into the insulation of my wiring kit and cause future problems.
themargaritaman is offline   Reply With Quote
Old 12-07-2009, 03:13 PM   #4
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: No tail lights!!!

to run grounds there is no cutting of wire harness//you get a wire or strap ,drill a hole in crosssill of bed and attach one end then you drill or use existing hole in frame to mount the other end of ground cable// all mount holes should b bright shiny metal to metal contact for good grounding
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline   Reply With Quote
Old 12-07-2009, 04:15 PM   #5
themargaritaman
Registered User
 
Join Date: Sep 2009
Location: Hesperia, California
Posts: 3
Re: No tail lights!!!

Okay. What do you mean by the crossill? Is that any one of the cross members? I have the 2 piece driveshaft also.
themargaritaman is offline   Reply With Quote
Reply

Bookmarks

Tags
brakes, fuse, lights, screwed, short


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com