KS For those looking for correct cruise - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chipflyer · 12-27-2009, 05:38 PM

Not mine but here is a very nice 71-72 dealer installed cruise control setup.

Cruise control

**71blksuper4x4** · 12-27-2009, 06:20 PM

hey Jeff, did you happen to stumble across that bracket yet? Like I said no rush, and I understand if you haven't looked as it's pretty cold around here. Trevor

chipflyer · 12-27-2009, 10:15 PM

This is what I have Trevor, if its what you're after you can have it.

Jeff

**72 Super** · 12-27-2009, 10:21 PM

Was cruise control available in 72 from the factory? or were they all dealer installed units? If it was available would this be the exact same set up?

Thanks,Ray

chipflyer · 12-27-2009, 10:33 PM

No it was not a factory option in 1971 or 72. It was available from the dealer. No option code is listed in the 71 or 72 dealer data books that I have, but you could order it in 69 or 70. Maybe even 68, I can't remember for sure.

Jeff

**72 Super** · 12-27-2009, 10:51 PM

Thats what I had thought, but wasn't sure. That sure is a nice complete set up.

**71blksuper4x4** · 12-27-2009, 11:08 PM

Jeff, I will look at the ones I have, I don't think that one is the one I am looking for unless the one on your truck matches this one. I have the correct servo like yours now and am just missing the transducer mount. Trevor

chipflyer · 12-27-2009, 11:22 PM

I'm off tomorrow Trevor, I will compare it with the one on my truck. I moved a bunch of snow and found that in a box and didn't even think to compare them. Think I was a bit numb from the cold.

jaros44sr · 12-28-2009, 12:05 PM

Quote:

Originally Posted by chipflyer

Not mine but here is a very nice 71-72 dealer installed cruise control setup.

Cruise control

I am not familiar with pricing on this item, but would like to ask your opinion on the price. Does the unit look complete to you?

I am considering the purchase of the item, but would like your input...thanks for your time

**71blksuper4x4** · 12-28-2009, 12:35 PM

If Roger says it's complete, it's complete. Roger is a stand up car guy. Bought NOS parts from him in the past.

**71blksuper4x4** · 12-28-2009, 12:41 PM

He does say that it is missing the vacuum tee. Trevor

chipflyer · 12-28-2009, 01:15 PM

Its complete minus the tee, which can easily be made from your existing tee but it also has the wrong switch. He does say that he has the correct under dash switch that he will include for another $95. It's a bit more than I would spend, but it is very nice and you don't see them listed in that condition very often. The 71-72 servo shown is an extremely hard part to find.

Jeff

jaros44sr · 12-28-2009, 01:30 PM

Thanks Guys! Great input! I was looking for Rep. of the guy and you provided that. Correct switch at this point isn't worth an additional 100

I have two problems

I have a 1406 Edelbrock with Lokar throttle and kickdown cables....mounting bracket for cruise/vacuum cable may be an issue

Accel HEI, which is very large, not much space on the firewall for vacuum mount

Any input?

So, if I can get around these two problems I may go for it

**71blksuper4x4** · 12-28-2009, 01:51 PM

the vacuum does not mount on the firewall like the 68-70 cruise. It mounts on top of the inner fender on the D.S. The transducer mounts off to the side facing the motor on the inner fender. Jeff, I just picked up the correct servo 2 weeks ago on ebay for $8, but like I said, I am missing the transducer bracket like what Roger has. I looked at all of them I have, I have 2 (68-70), 1 (72), 1(73-80). I believe you have the 73-80 type in the pic, but I bet you have the correct one like Roger has on your truck. Trevor

chipflyer · 12-28-2009, 02:09 PM

Just looked Trevor, and its not like the one on my truck. I found another that I had but its completely different too. Sorry, I guess I'm not much help.
Good score on the servo, I used to watch Ebay like a hawk for the cruise parts, you have found some great deals up there!

Jeff

jaros44sr · 12-28-2009, 02:10 PM

Quote:

Originally Posted by 71blksuper4x4

the vacuum does not mount on the firewall like the 68-70 cruise. It mounts on top of the inner fender on the D.S. The transducer mounts off to the side facing the motor on the inner fender. Trevor

Thanks for the info, solves one of the problems. Do you have any pics or info. on how the cable mounts to the intake/carb?

**71blksuper4x4** · 12-28-2009, 02:43 PM

Jeff, what does the other look like? I could tell you pretty much from looking at it what style it is.

Jaros, Jeff has the instructions for installing these, it should give you an idea of how everything goes together. My truck is in pieces right now getting it's second rebirth. Trevor

**71blksuper4x4** · 12-28-2009, 02:45 PM

Jaros, what year of truck/blazer are you putting this on? Trevor

jaros44sr · 12-28-2009, 03:07 PM

Quote:

Originally Posted by 71blksuper4x4

Jaros, what year of truck/blazer are you putting this on? Trevor

Well, it was a '72 Jimmy, but I put a '68 Chevy front clip on it. GMC grille just had too much chrome on it for my liking!

Hooking it up to the carb is my only problem now, just doesn't seem like there are enough places to hook up the vacuum linkage. Maybe he'll help me out with pics

jaros44sr · 12-29-2009, 03:50 PM

Quote:

Originally Posted by chipflyer

Not mine but here is a very nice 71-72 dealer installed cruise control setup.

Cruise control

Thanks for the link, talked to Roger today and it seems like I bought it!

Nice to have the help from the forum guys

teeitup · 12-29-2009, 04:27 PM

Roger knows his truck stuff, I think you'll be happy with it

12-27-2009, 05:38 PM	#1
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	For those looking for correct cruise Not mine but here is a very nice 71-72 dealer installed cruise control setup. Cruise control __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

12-27-2009, 06:20 PM	#2
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: For those looking for correct cruise hey Jeff, did you happen to stumble across that bracket yet? Like I said no rush, and I understand if you haven't looked as it's pretty cold around here. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

12-27-2009, 10:15 PM	#3
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: For those looking for correct cruise This is what I have Trevor, if its what you're after you can have it. Jeff Attached Images __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

12-27-2009, 10:21 PM	#4
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,686	Re: For those looking for correct cruise Was cruise control available in 72 from the factory? or were they all dealer installed units? If it was available would this be the exact same set up? Thanks,Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

12-27-2009, 10:33 PM	#5
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: For those looking for correct cruise No it was not a factory option in 1971 or 72. It was available from the dealer. No option code is listed in the 71 or 72 dealer data books that I have, but you could order it in 69 or 70. Maybe even 68, I can't remember for sure. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

12-27-2009, 10:51 PM	#6
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,686	Re: For those looking for correct cruise Thats what I had thought, but wasn't sure. That sure is a nice complete set up. __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

12-27-2009, 11:08 PM	#7
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: For those looking for correct cruise Jeff, I will look at the ones I have, I don't think that one is the one I am looking for unless the one on your truck matches this one. I have the correct servo like yours now and am just missing the transducer mount. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

12-27-2009, 11:22 PM	#8
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: For those looking for correct cruise I'm off tomorrow Trevor, I will compare it with the one on my truck. I moved a bunch of snow and found that in a box and didn't even think to compare them. Think I was a bit numb from the cold. __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

12-28-2009, 12:35 PM	#10
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: For those looking for correct cruise If Roger says it's complete, it's complete. Roger is a stand up car guy. Bought NOS parts from him in the past. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

12-28-2009, 12:41 PM	#11
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: For those looking for correct cruise He does say that it is missing the vacuum tee. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

12-28-2009, 01:15 PM	#12
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: For those looking for correct cruise Its complete minus the tee, which can easily be made from your existing tee but it also has the wrong switch. He does say that he has the correct under dash switch that he will include for another $95. It's a bit more than I would spend, but it is very nice and you don't see them listed in that condition very often. The 71-72 servo shown is an extremely hard part to find. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

12-28-2009, 01:30 PM	#13
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,469	Re: For those looking for correct cruise Thanks Guys! Great input! I was looking for Rep. of the guy and you provided that. Correct switch at this point isn't worth an additional 100 I have two problems I have a 1406 Edelbrock with Lokar throttle and kickdown cables....mounting bracket for cruise/vacuum cable may be an issue Accel HEI, which is very large, not much space on the firewall for vacuum mount Any input? So, if I can get around these two problems I may go for it __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

12-28-2009, 01:51 PM	#14
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: For those looking for correct cruise the vacuum does not mount on the firewall like the 68-70 cruise. It mounts on top of the inner fender on the D.S. The transducer mounts off to the side facing the motor on the inner fender. Jeff, I just picked up the correct servo 2 weeks ago on ebay for $8, but like I said, I am missing the transducer bracket like what Roger has. I looked at all of them I have, I have 2 (68-70), 1 (72), 1(73-80). I believe you have the 73-80 type in the pic, but I bet you have the correct one like Roger has on your truck. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

12-28-2009, 02:09 PM	#15
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: For those looking for correct cruise Just looked Trevor, and its not like the one on my truck. I found another that I had but its completely different too. Sorry, I guess I'm not much help. Good score on the servo, I used to watch Ebay like a hawk for the cruise parts, you have found some great deals up there! Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

12-28-2009, 02:43 PM	#17
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: For those looking for correct cruise Jeff, what does the other look like? I could tell you pretty much from looking at it what style it is. Jaros, Jeff has the instructions for installing these, it should give you an idea of how everything goes together. My truck is in pieces right now getting it's second rebirth. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever



Register or Log In To remove these advertisements.

12-28-2009, 02:45 PM	#18
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: For those looking for correct cruise Jaros, what year of truck/blazer are you putting this on? Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

12-29-2009, 04:27 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: For those looking for correct cruise Roger knows his truck stuff, I think you'll be happy with it __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.