late build thread...LOL - The 1947 - Present Chevrolet & GMC Truck Message Board Network

justpball · 01-25-2010, 02:05 PM

ok so everyone keeps asking me about a build thread so I guess I will try to create one, so there may be a few steps left out along the way...LOL, if you have any questions just ask... here we go. Picked up a taterd Burb for some chump change.

Then got her some new shoes, also dropped it some, pulled 2 leafs in the rear, and chopped some 06 chevy coils down and put them in.

Then about 6 months later started the body work for paint...and traded the 22s for some coys so I could keep my AC when I bagged it.

While we had it tore apart at the body shop i started get up parts for the air ride.
here it is after I bagged it,

Then it was not low enough so I chopped the crossmember and cut the cups down to 1.25 inches

.

justpball · 01-25-2010, 02:19 PM

ok so here it is after the chopped xmember

it sits on the front spoiler and the tires are touching the inside of the fender...
Nice but the front bags were touching the a-arm, so i put the 2.5 cups back in and am sinking some 9 inch pipe down into a set of a-arms... so this is it with the bigger cups in.

STOCKISH · 01-25-2010, 02:44 PM

Damn that's sick. The ultimate road trip wagon.

justpball · 01-25-2010, 02:46 PM

love taking it on the Hway! it rides like a caddi!

Driveway Dreams · 01-25-2010, 09:15 PM

Your Burb looks killer as usual. Do you have any close up shots of your headlight bezels after you "cleaned them up"?

justpball · 01-26-2010, 09:24 AM

I will take one for you...

menace121978 · 01-26-2010, 09:42 PM

sick! outstanding job man!

Driveway Dreams · 01-26-2010, 11:10 PM

Quote:

Originally Posted by justpball

I will take one for you...

Thanks! How bad were they before? I am thinking about doing mine, but not sure yet.

justpball · 03-20-2010, 10:53 PM

here is the rear stuff

joe231 · 03-21-2010, 02:07 AM

I love your 'burb!!!
What are the specs on the coys?

hotrod_991 · 03-21-2010, 08:08 AM

i see you fliped the axel and bagged it but kept you leafs and didnt cut the hell outa the botom fo the body. doesnt that make it harder for the bags to raise the frame aways from the axle? sorry dont know alot about bags but thinking about it on my C10 lwb but I dont want to cut up my bed or run a four link. Would rather keep the leafs and my trac bars.

79gmc5.3 · 03-21-2010, 02:50 PM

Very nice paint job!! Love the colors and that stripe!!!

johnnyrvan · 03-21-2010, 06:50 PM

dang seeing that makes me want to get another burb looks nice

justpball · 03-22-2010, 07:31 PM

The coys are 20x10 on rear 5.5 BS, 18x 8 on front with 4 BS

87 dually burb · 03-24-2010, 08:17 PM

3 quick questions for you
what size gas tank are you running?
how close to ground is tank when aired out?
frame to ground in rear aired out?

thanks

I just ripped all my tub work back out raising gas tank
and 3/4 link setup soon building rear to lay body
removing pinch weld and doing 2"x4" frame center section

justpball · 03-25-2010, 09:18 AM

I am still running the stock 35 gallon tank in the stock location, it is about 3 inches off the ground, the frame is about the same. I took the gas tank skid plate off my 4x4 burb and put it on this one so if it drags it is not a big deal, but I still have my hitch on here and it drags before the tank does!

justpball · 03-25-2010, 10:22 AM

Quote:

Originally Posted by Driveway Dreams

Your Burb looks killer as usual. Do you have any close up shots of your headlight bezels after you "cleaned them up"?

here ya go

justpball · 03-25-2010, 10:29 AM

here is what I am doing next!

**nlped** · 03-26-2010, 11:15 AM

^^^That's good work! Looks great...well once it is all cleaned and sprayed, it will be great looking!

justpball · 03-26-2010, 11:34 AM

getting them powdercoated hammertone silver, I have the upper ones as well that we cut and angled down to keep the ball joints from binding

cochino12 · 03-29-2010, 08:23 PM

I see you are running 18" & 20"s what size are the tires? Also would you mind measuring your fender wells in front and back when its aired out? thanks

87 dually burb · 03-29-2010, 09:21 PM

ok I'm ready to see the front aired out with the new arms
so when are you starting on the back

Driveway Dreams · 03-29-2010, 11:37 PM

Quote:

Originally Posted by justpball

here ya go

Beautiful, thank you. May have to do that to mine at some point.

justpball · 04-29-2010, 11:42 AM

Quote:

Originally Posted by cochino12

I see you are running 18" & 20"s what size are the tires? Also would you mind measuring your fender wells in front and back when its aired out? thanks

265-35-18,and 285-30-20, the front fender well is 22 in from the ground and the rear is 21 in

justpball · 04-29-2010, 11:53 AM

here is what I am currently working on, because I am still waiting on my other coys to come in...

01-25-2010, 02:05 PM	#1
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	late build thread...LOL ok so everyone keeps asking me about a build thread so I guess I will try to create one, so there may be a few steps left out along the way...LOL, if you have any questions just ask... here we go. Picked up a taterd Burb for some chump change. Then got her some new shoes, also dropped it some, pulled 2 leafs in the rear, and chopped some 06 chevy coils down and put them in. Then about 6 months later started the body work for paint...and traded the 22s for some coys so I could keep my AC when I bagged it. While we had it tore apart at the body shop i started get up parts for the air ride. here it is after I bagged it, Then it was not low enough so I chopped the crossmember and cut the cups down to 1.25 inches . __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055 Last edited by justpball; 02-02-2015 at 01:54 PM.

01-25-2010, 02:19 PM	#2
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL ok so here it is after the chopped xmember it sits on the front spoiler and the tires are touching the inside of the fender... Nice but the front bags were touching the a-arm, so i put the 2.5 cups back in and am sinking some 9 inch pipe down into a set of a-arms... so this is it with the bigger cups in. __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055 Last edited by justpball; 01-25-2010 at 02:33 PM.

01-25-2010, 02:44 PM	#3
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: late build thread...LOL Damn that's sick. The ultimate road trip wagon. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-25-2010, 02:46 PM	#4
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL love taking it on the Hway! it rides like a caddi! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

01-25-2010, 09:15 PM	#5
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: late build thread...LOL Your Burb looks killer as usual. Do you have any close up shots of your headlight bezels after you "cleaned them up"? __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

01-26-2010, 09:24 AM	#6
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL I will take one for you... __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

01-26-2010, 09:42 PM	#7
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: late build thread...LOL sick! outstanding job man! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

03-20-2010, 10:53 PM	#9
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL here is the rear stuff __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

03-21-2010, 02:07 AM	#10
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: late build thread...LOL I love your 'burb!!! What are the specs on the coys? __________________ *CHEVY ONLY*

03-21-2010, 08:08 AM	#11
hotrod_991 Registered User Join Date: Jul 2009 Location: Thibodaux, LA Posts: 479	Re: late build thread...LOL i see you fliped the axel and bagged it but kept you leafs and didnt cut the hell outa the botom fo the body. doesnt that make it harder for the bags to raise the frame aways from the axle? sorry dont know alot about bags but thinking about it on my C10 lwb but I dont want to cut up my bed or run a four link. Would rather keep the leafs and my trac bars. __________________ "Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint

03-21-2010, 02:50 PM	#12
79gmc5.3 6.0L power......... Join Date: Dec 2009 Location: Acworth GA Posts: 292	Re: late build thread...LOL Very nice paint job!! Love the colors and that stripe!!! __________________ What ever the mind of man can conceive......... he can achieve! My built thread http://67-72chevytrucks.com/vboard/s...d.php?t=375914 1979 GMC Sierra 6.0 L 4L60E 1995 Mustang GT 347

03-21-2010, 06:50 PM	#13
johnnyrvan Registered User Join Date: Dec 2009 Location: tulare,ca Posts: 20	Re: late build thread...LOL dang seeing that makes me want to get another burb looks nice __________________ If your gonna be a bear, be a Grizzly

03-22-2010, 07:31 PM	#14
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL The coys are 20x10 on rear 5.5 BS, 18x 8 on front with 4 BS __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055 Last edited by justpball; 06-21-2010 at 10:53 AM.

03-24-2010, 08:17 PM	#15
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: late build thread...LOL 3 quick questions for you what size gas tank are you running? how close to ground is tank when aired out? frame to ground in rear aired out? thanks I just ripped all my tub work back out raising gas tank and 3/4 link setup soon building rear to lay body removing pinch weld and doing 2"x4" frame center section __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

03-25-2010, 09:18 AM	#16
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL I am still running the stock 35 gallon tank in the stock location, it is about 3 inches off the ground, the frame is about the same. I took the gas tank skid plate off my 4x4 burb and put it on this one so if it drags it is not a big deal, but I still have my hitch on here and it drags before the tank does! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055



Register or Log In To remove these advertisements.

03-25-2010, 10:29 AM	#18
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL here is what I am doing next! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055 Last edited by justpball; 03-25-2010 at 10:32 AM.

03-26-2010, 11:15 AM	#19
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: late build thread...LOL ^^^That's good work! Looks great...well once it is all cleaned and sprayed, it will be great looking! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

03-26-2010, 11:34 AM	#20
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL getting them powdercoated hammertone silver, I have the upper ones as well that we cut and angled down to keep the ball joints from binding __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055 Last edited by justpball; 03-26-2010 at 11:36 AM.

03-29-2010, 08:23 PM	#21
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: late build thread...LOL I see you are running 18" & 20"s what size are the tires? Also would you mind measuring your fender wells in front and back when its aired out? thanks __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually Last edited by cochino12; 03-29-2010 at 08:48 PM.

03-29-2010, 09:21 PM	#22
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: late build thread...LOL ok I'm ready to see the front aired out with the new arms so when are you starting on the back __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

04-29-2010, 11:53 AM	#25
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL here is what I am currently working on, because I am still waiting on my other coys to come in... __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

Register or Log In To remove these advertisements.