![]() |
![]() |
#1 |
Registered User
Join Date: Apr 2008
Location: Sabattus, Maine
Posts: 84
|
![]()
The tear down is finally complete, I just need a few more parts. These are the last few I can't buy new. I need the rear cross member for the frame on my 72 GMC K2500. The one that the rubber mallet is sitting on in the picture. I also need the upper rear shock mounts right in back of them. Both are real rotten and beyond repair. Since the junkyards here in Maine are exactly that... full of junk I hope someone else knows where I can get some nice ones. I believe you can buy new ones for a C20 (shock mounts) but not a K20. Once I have these I can paint the frame and start reassembly. I am getting the itch to start working on this thing again and when it's warm enough where the metal doesn't stick to my hands I will get at it.
Thanks Navysnipe |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2005
Location: Canton North carolina
Posts: 3,079
|
Re: Where do I get?
Contant member t kornick he has helped me out w/ my 4x4 build in the past and he has nice clean az parts
__________________
67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Jan 2009
Location: highspire,pa
Posts: 423
|
Re: Where do I get?
Yeah you can by upper shock mount for a GM deal there a workhorse part numbers.I bought a set,Heres a thread i started about shock mounts awhile back,I hope this helps you out.
http://67-72chevytrucks.com/vboard/s...94#post3069894 15698355 LH 15698356 RH
__________________
'72 chevy k20 '06 H-D Springer softail http://www.bluemooncruisers.com/ http://www.enginecycle.com/ ~Eric ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2008
Location: Lafayette, IN
Posts: 226
|
Re: Where do I get?
Ah ha
__________________
Mark 1967 C/10 stepside lwb daily driver 1968 C/10 fleetside lwb parts truck 1971 Cheyenne Super swb project Last edited by evilways; 02-08-2010 at 06:02 PM. |
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Jan 2009
Location: highspire,pa
Posts: 423
|
Re: Where do I get?
Mine look like they are in the same location as your by looking at your picture.I gave you the part numbers for the mounts..look at the cad drawling in link to the tread i gave you also.In fact the mounts i bought like the same as you have...When i got my truck the upper shock mounts were gone.
__________________
'72 chevy k20 '06 H-D Springer softail http://www.bluemooncruisers.com/ http://www.enginecycle.com/ ~Eric ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2008
Location: Sabattus, Maine
Posts: 84
|
Re: Where do I get?
So, Bignbad you are saying that I can take those two part numbers and go down to the local GM dealer and order them and they will bolt right up to my 72 GMC 4x4 using the original three rivet holes?? If thats the case I am there with the Visa next week. I know the crossmember will be a challenge but I have a few phone numbers for bone yards in California that will ship for cheap.
Navysnipe |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2008
Location: Sabattus, Maine
Posts: 84
|
Re: Where do I get?
OK I jumped the gun a little I posted before I finished my coffee. So I need to find the nearest workhorse dealer and buy them.....got it. I would like to look at them before I purchase them does anyone have some pictures of these things??
Navysnipe |
![]() |
![]() |
![]() |
Bookmarks |
|
|