67-71 doors vs 72 doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tap500 · 01-13-2010, 02:02 PM

What is the difference on the 72 door? I have been told it is just the small hole below the vent window? Is this true?

OARNGESI · 01-13-2010, 02:05 PM

the window regulators are different and door panels

HuggerCST · 01-13-2010, 02:07 PM

Also, the holes that are used to attach the door panels are different. 67-71 used screws along the bottom of the door panel, and '72s used plastic clips.

tap500 · 01-13-2010, 02:15 PM

Thanks guys.

If I have a good rust free 72 door for my 71 is it worth the effort to make it fit?

**72K20** · 01-13-2010, 02:27 PM

If you were anywhere near Texas I would gladly trade you a nice rust free 71 door for that 72 door! Although, a good "rust free" anything is always a good place to start.

dan42 · 01-13-2010, 04:20 PM

I have '72 doors on my '70 - doesn't bother me at all. No one really even notices, except us guys.

**truckster** · 01-13-2010, 05:30 PM

The only real problem you'll run into is that the regulator crank sticks out farther on the 72 than on the 71. If you swap the regulators you shouldn't have a problem.

tap500 · 01-13-2010, 11:30 PM

Summary:
67-68 doors are the same except for the additional hole inside the door just below the vent window and the following other details.
-window regulators are slightly different
-door panels are different
-door panel mounting holes are different

this was just to recap everything in case anything is missing. Thanks to everyone for replying. I was planning on taking my regulator out and using it in the 72 door. Looks like all I will have to do is weld up the hole below the vent window.

**leddzepp** · 01-13-2010, 11:42 PM

Quote:

Originally Posted by tap500

Looks like all I will have to do is weld up the hole below the vent window.

Why would you want to do that? That hole is for a reinforcement screw that sandwiches the door tighter to the vent window frame, making it less prone to wind noise.

turp mcspray · 01-14-2010, 02:45 PM

Yes, leave the holes. The 72 doors would be an upgrade!

tabarcus · 02-12-2010, 09:02 AM

Anyone know if the interior door panels from a 72 C-10 will fit onto the 67 door? And if not, are the modifications significant?

pat 70/71 · 02-12-2010, 12:04 PM

I have 72 doors on my 71 they came from a dump truck! the hole is no biggie for me. I installed nutserts @ the bottom of the doors/ installed the trim/ 71 door panels/ arm rest . I went to Pamona swap meet & after walking every isle I found this guy that had two doors. I needed only the d/s door but he would only sell the pair. I asked how much? gotta get $75 for both! deal, put em in my 65 nova's trunk and off we went. (no dents/ no rust) cheers, Pat

**LockDoc** · 02-12-2010, 08:25 PM

-
Here's what goes in the holes...

LockDoc

**LockDoc** · 02-12-2010, 08:46 PM

Quote:

Originally Posted by tabarcus

Anyone know if the interior door panels from a 72 C-10 will fit onto the 67 door? And if not, are the modifications significant?

I have them on my 67 with no mods. The handles go on pretty hard and I had to try a couple of different ones on the drivers side before I got one to lock on. I also used them on the Red/White '71 4x4.

LockDoc

01-13-2010, 02:02 PM	#1
tap500 Registered User Join Date: Jul 2009 Location: Farmington CT Posts: 41	67-71 doors vs 72 doors What is the difference on the 72 door? I have been told it is just the small hole below the vent window? Is this true? Attached Images

01-13-2010, 02:05 PM	#2
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: 67-71 doors vs 72 doors the window regulators are different and door panels __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

01-13-2010, 02:07 PM	#3
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: 67-71 doors vs 72 doors Also, the holes that are used to attach the door panels are different. 67-71 used screws along the bottom of the door panel, and '72s used plastic clips. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-13-2010, 02:15 PM	#4
tap500 Registered User Join Date: Jul 2009 Location: Farmington CT Posts: 41	Re: 67-71 doors vs 72 doors Thanks guys. If I have a good rust free 72 door for my 71 is it worth the effort to make it fit?

01-13-2010, 02:27 PM	#5
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: 67-71 doors vs 72 doors If you were anywhere near Texas I would gladly trade you a nice rust free 71 door for that 72 door! Although, a good "rust free" anything is always a good place to start.

01-13-2010, 04:20 PM	#6
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: 67-71 doors vs 72 doors I have '72 doors on my '70 - doesn't bother me at all. No one really even notices, except us guys. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

01-13-2010, 05:30 PM	#7
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,915	Re: 67-71 doors vs 72 doors The only real problem you'll run into is that the regulator crank sticks out farther on the 72 than on the 71. If you swap the regulators you shouldn't have a problem.

01-13-2010, 11:30 PM	#8
tap500 Registered User Join Date: Jul 2009 Location: Farmington CT Posts: 41	Re: 67-71 doors vs 72 doors Summary: 67-68 doors are the same except for the additional hole inside the door just below the vent window and the following other details. -window regulators are slightly different -door panels are different -door panel mounting holes are different this was just to recap everything in case anything is missing. Thanks to everyone for replying. I was planning on taking my regulator out and using it in the 72 door. Looks like all I will have to do is weld up the hole below the vent window.

01-14-2010, 02:45 PM	#10
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: 67-71 doors vs 72 doors Yes, leave the holes. The 72 doors would be an upgrade! __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

02-12-2010, 09:02 AM	#11
tabarcus 72ChevyStep Join Date: Jun 2009 Location: Fredericksburg, VA Posts: 545	Re: 67-71 doors vs 72 doors Anyone know if the interior door panels from a 72 C-10 will fit onto the 67 door? And if not, are the modifications significant?

02-12-2010, 12:04 PM	#12
pat 70/71 Registered User Join Date: Nov 2009 Location: newbury park california Posts: 1,038	Re: 67-71 doors vs 72 doors I have 72 doors on my 71 they came from a dump truck! the hole is no biggie for me. I installed nutserts @ the bottom of the doors/ installed the trim/ 71 door panels/ arm rest . I went to Pamona swap meet & after walking every isle I found this guy that had two doors. I needed only the d/s door but he would only sell the pair. I asked how much? gotta get $75 for both! deal, put em in my 65 nova's trunk and off we went. (no dents/ no rust) cheers, Pat

02-12-2010, 08:25 PM	#13
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,513	Re: 67-71 doors vs 72 doors - Here's what goes in the holes... LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.