![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Self bleaders....... brakes
I bought a set of self bleaders that screw into the bleader holes for my disk brakes my question is can I just leave them in there? Or should I just replace them with the originals?
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,217
|
Re: Self bleaders....... brakes
Leave them in there.
|
![]() |
![]() |
![]() |
#3 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: Self bleaders....... brakes
Now the next question since I got that figured out and done. With the rear brake line detached from the prop valve when i pump the pedal I should get a steady stream of fluid correct? Not just dribble dribble..
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2010
Location: Roanoke, Tx.
Posts: 1,561
|
Re: Self bleaders....... brakes
You should get a steady stream of brake fluid. Why do you have the line off at the prop. valve? I am having trouble getting the brake line off of the rear brake hose. It connects in side of the frame. And it is hard to get to. I have been trying to soak it with penetrating oil. The rear hose is the only old part on the brake system. I may have to replace the line from front to the rear. Good luck . Grady
One more thing. Don't let up on the brake pedal with the line off. You will suck air back into the master cyl. Last edited by grs; 02-13-2010 at 06:06 PM. |
![]() |
![]() |
![]() |
#5 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: Self bleaders....... brakes
I took that line off cause I was not getting fluid to the rear brakes and im just getting a slight drizzle from the line soooo id guess I need a new master cylinder...
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Self bleaders....... brakes
maybe read a service manual about how to bleed brakes properly and centering your pin
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#7 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: Self bleaders....... brakes
edited....
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 02-13-2010 at 06:46 PM. Reason: no reason just reading the service manual... |
![]() |
![]() |
![]() |
Bookmarks |
|
|