Behind the seat ideas? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

COACHMEASON · 02-22-2010, 08:04 PM

As you can see, the PO actually painted the gas tank...Well, I have went with the rear tank so know I have this "red, unpainted spot" behind my seat...Ideas on what to do with it? My intial plan was to sound dampen and maybe carpet a made to fit board that affixed to the back wall...Any suggestions and/or pics would be great...I do plan to put woofers in it at some point, just WAY down on the list...thanks

jsmithbm · 02-22-2010, 08:14 PM

just depends on what you had in mind for the space, some people move the seat all the way back so they have move room under the wheel. But i suppose you could put a very small speaker box, paint it, carpet it, danomat it. What ever tickles your fancy i suppose. Take some photos of it when your done.

fastom · 02-23-2010, 06:05 PM

This is what I did!

C20-67_N_MO · 02-23-2010, 06:31 PM

WOW fastom that looks awesome!

tubbedII · 02-23-2010, 07:28 PM

That sure does, Fastom! How do the highs sound coming from behind the seat like that, and what do you think of those shallow pioneers?

Nova70 · 02-23-2010, 07:39 PM

If you plan on putting some shallow mounts back there I would put some sound dampener on it then just cover it with some carpet for now. Of course you could always do a blowthrough.

But I doubt that's what you're going for. I will have my blowthrough done this summer, I can't wait.

This is my buddies. He's since finished but I'll have this monster sized hole in mine.

Hottrucks · 02-23-2010, 08:18 PM

my tank is still in but heres a pic of a piece of paneling I covered in carpet 4 screws hold it in on top

COACHMEASON · 02-23-2010, 08:29 PM

What type of paneling? Wood paneling?

Hottrucks · 02-23-2010, 08:40 PM

yep cheapest stuff you can find even ask for a damaged sheet I cut a piece of 3/4" pine to match the angle of the tank ...some 3m trim aheasive $11 (most expensive part of the build but I only used a little) the paneling I had $0and the carpet cost me $9 at wally world so I have $20 and about an hour into it I bet you could buy a damaged sheet of 1/8" paneling ( who care what color) for another $5...If you et a chance theres even a console build in my build with a link to the console...should be right on the last page all wood..the console I have about 20 hours into it but thats with the curves radio amp sub woofer ..truth is its pretty easy just alot of fit and trim fit and trim.....

the rest of the paneling and carpet will make quick work of making up some kick panels....or a headliner...material is available at most fabric stores

COACHMEASON · 02-24-2010, 12:43 AM

thanks for the ideas...

70short · 02-24-2010, 03:35 AM

I have this behind my seat MTX 10's

02-22-2010, 08:04 PM	#1
COACHMEASON Keep On Keepin' On Join Date: Apr 2006 Location: Oklahoma Posts: 417	Behind the seat ideas? As you can see, the PO actually painted the gas tank...Well, I have went with the rear tank so know I have this "red, unpainted spot" behind my seat...Ideas on what to do with it? My intial plan was to sound dampen and maybe carpet a made to fit board that affixed to the back wall...Any suggestions and/or pics would be great...I do plan to put woofers in it at some point, just WAY down on the list...thanks Attached Images __________________ 07 Avalanche Z71 92 Mustang 5.0 GT (Triple White w/ 53,000 miles) 72 SWB Chevy w/ PS, AC, 350/350 Current Project ....In paint shop getting body/paint work done (Corvette Velocity Yellow)... http://67-72chevytrucks.com/vboard/s...d.php?t=157669

02-22-2010, 08:14 PM	#2
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Behind the seat ideas? just depends on what you had in mind for the space, some people move the seat all the way back so they have move room under the wheel. But i suppose you could put a very small speaker box, paint it, carpet it, danomat it. What ever tickles your fancy i suppose. Take some photos of it when your done. __________________ Learning as I go! -------------------------------------

02-23-2010, 06:05 PM	#3
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: Behind the seat ideas? This is what I did! Attached Images __________________ Tom: 1968 Chevy SWB ZZ383 W/700R4 Gen-II Compact Vintage Air System PPG paint, Mandarin Copper and Vanilla Shake. http://www.hubgarage.com/mygarage/fastom Stupid should hurt and eventually become fatal!

02-23-2010, 06:31 PM	#4
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Behind the seat ideas? WOW fastom that looks awesome! __________________ Coming Soon: Project 1970 Country Truck

02-23-2010, 07:28 PM	#5
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: Behind the seat ideas? That sure does, Fastom! How do the highs sound coming from behind the seat like that, and what do you think of those shallow pioneers? __________________ 1970 2wd Blazer

02-23-2010, 07:39 PM	#6
Nova70 Registered User Join Date: Jun 2009 Location: Dub VC Utah Posts: 364	Re: Behind the seat ideas? If you plan on putting some shallow mounts back there I would put some sound dampener on it then just cover it with some carpet for now. Of course you could always do a blowthrough. But I doubt that's what you're going for. I will have my blowthrough done this summer, I can't wait. This is my buddies. He's since finished but I'll have this monster sized hole in mine. __________________ '70 K10-- 4" lift on 35"s-- For Sale http://www.ksl.com/index.php?sid=733...iew&ad=4578305 Last edited by Nova70; 02-23-2010 at 07:40 PM.

02-23-2010, 08:18 PM	#7
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Behind the seat ideas? my tank is still in but heres a pic of a piece of paneling I covered in carpet 4 screws hold it in on top Attached Images __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

02-23-2010, 08:29 PM	#8
COACHMEASON Keep On Keepin' On Join Date: Apr 2006 Location: Oklahoma Posts: 417	Re: Behind the seat ideas? What type of paneling? Wood paneling? __________________ 07 Avalanche Z71 92 Mustang 5.0 GT (Triple White w/ 53,000 miles) 72 SWB Chevy w/ PS, AC, 350/350 Current Project ....In paint shop getting body/paint work done (Corvette Velocity Yellow)... http://67-72chevytrucks.com/vboard/s...d.php?t=157669

02-23-2010, 08:40 PM	#9
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Behind the seat ideas? yep cheapest stuff you can find even ask for a damaged sheet I cut a piece of 3/4" pine to match the angle of the tank ...some 3m trim aheasive $11 (most expensive part of the build but I only used a little) the paneling I had $0and the carpet cost me $9 at wally world so I have $20 and about an hour into it I bet you could buy a damaged sheet of 1/8" paneling ( who care what color) for another $5...If you et a chance theres even a console build in my build with a link to the console...should be right on the last page all wood..the console I have about 20 hours into it but thats with the curves radio amp sub woofer ..truth is its pretty easy just alot of fit and trim fit and trim..... the rest of the paneling and carpet will make quick work of making up some kick panels....or a headliner...material is available at most fabric stores __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html Last edited by Hottrucks; 02-23-2010 at 08:41 PM.

02-24-2010, 12:43 AM	#10
COACHMEASON Keep On Keepin' On Join Date: Apr 2006 Location: Oklahoma Posts: 417	Re: Behind the seat ideas? thanks for the ideas... __________________ 07 Avalanche Z71 92 Mustang 5.0 GT (Triple White w/ 53,000 miles) 72 SWB Chevy w/ PS, AC, 350/350 Current Project ....In paint shop getting body/paint work done (Corvette Velocity Yellow)... http://67-72chevytrucks.com/vboard/s...d.php?t=157669

02-24-2010, 03:35 AM	#11
70short Registered User Join Date: Sep 2003 Location: Boise ID Posts: 609	Re: Behind the seat ideas? I have this behind my seat MTX 10's Attached Images __________________ "72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.