04-22-2010, 11:31 PM | #2 |
Account Suspended
Join Date: Jan 2007
Location: Tucson
Posts: 2,183
|
Re: Front end torque
The factory assembly manual says tighten past 40-60 ft/lbs to the next slot to allow insertion of the cotter key for the ball joints. Tie rod ends get torqued 25-35 ft/lbs plus the next slot to allow insertion of the cotter key.
Last edited by Fitz; 04-22-2010 at 11:49 PM. |
Bookmarks |
|
|