Dana 44 - Corperate 10 interchange? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

eric67m · 05-09-2010, 10:24 PM

My truck has a dana 44, open, disk front end. I also have a corperate 10" front end, open disk that is missing the calipers. The front end will be going to the scrappers, are there any pieces that I should keep for interchange onto my Dana 44?

msgross · 05-09-2010, 10:34 PM

nearly everything from the knuckles out will work. The inner shafts and carrier are different, outer shafts, knuckles, spindles etc... will all work for spares.

I'd pull the carrier and pinion just in case someone needs spares.

05-09-2010, 10:24 PM	#1
eric67m Registered User Join Date: Apr 2005 Location: Monroe, WA Posts: 298	Dana 44 - Corperate 10 interchange? My truck has a dana 44, open, disk front end. I also have a corperate 10" front end, open disk that is missing the calipers. The front end will be going to the scrappers, are there any pieces that I should keep for interchange onto my Dana 44? __________________ 67 K10, lwb, fleetside, 327, 4spd, 205, cab and 3/4 frame swap, 14 bolt, big window, and a "rustoleum roll job"

05-09-2010, 10:34 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Dana 44 - Corperate 10 interchange? nearly everything from the knuckles out will work. The inner shafts and carrier are different, outer shafts, knuckles, spindles etc... will all work for spares. I'd pull the carrier and pinion just in case someone needs spares. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 05-09-2010 at 10:35 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.