Canada 12 bolt ring and pinion and carriers

[68chevyfuelie]

For sale a 2.76 gear ratio ring and pinion, and two 3 series open carriers, fit 2.76 to 3.42 ratios I believe. Some light surface rust on these from sitting in my shed, shouldn't affect how they work. Gears and one carrier came out of a 1978 C1500, was working fine, no broken teeth or chips or cracks I could see. I believe the truck had low miles on it, 80,000 or so, but it's been 3 years since I bought these, I may not remember exactly. I have no history on the other carrier, but it's in decent shape as well.

2.76 ring and pinion-$50
Carrier- $60 each

Other ratios and parts available, please see my other posts and respond there. All prices are negotiable and before shipping, in US dollars unless specified different. Please respond in post. Thanks.

[benoit454]

any 10 bolt stuff better then 3.42 like a 3.73 or 4.10 or so?

[68chevyfuelie]

I would assume so, I will look at the yard tomorrow. Do you just need ring and pinion, or carriers as well? Are you looking for nice stuff, or something to beat on? Thanks.

[benoit454]

just something to get a better gear in our 84, it'll be beat on or used daily, maybe or just weekends, it be nice to get all the guts ecept for the axles, but could possibly work with a ring and pinion if they are cheap enough.

[68chevyfuelie]

All I have right now are carriers, sorry. I'm supposed to look at an 88 Blazer this week, I'll let you know if I buy and what gears are in it. It's supposed to have a posi rear, but who knows if it's blown up. Thanks.

[Geezer2]

Originally Posted by 68chevyfuelie

All I have right now are carriers, sorry. I'm supposed to look at an 88 Blazer this week, I'll let you know if I buy and what gears are in it. It's supposed to have a posi rear, but who knows if it's blown up. Thanks.

I could use an open carrier for a 10 bolt 28 spline. I believe a carrier from 2.73 and in the 3's will work. Thanks and standing by

[68chevyfuelie]

benoit454, The Blazer deal fell through, the seller never called me back. I will let you know if I come across anything.

Geezer, I took a look in the yard today, I have a few carriers. A 10 bolt, 28 spline, open, "unloaded" carrier with no spiders/cross pins, and no guarantees on bearings, I'm asking $35 US plus shipping. A "loaded" carrier, with spiders, crosspin and decent, useable bearings, asking $125 plus the ride. A loaded carrier, spiders, crosspin and new Timken bearings asking $150 plus shipping. Thanks and let me know.
David

[Geezer2]

Originally Posted by 68chevyfuelie

benoit454, The Blazer deal fell through, the seller never called me back. I will let you know if I come across anything.

Geezer, I took a look in the yard today, I have a few carriers. A 10 bolt, 28 spline, open, "unloaded" carrier with no spiders/cross pins, and no guarantees on bearings, I'm asking $35 US plus shipping. A "loaded" carrier, with spiders, crosspin and decent, useable bearings, asking $125 plus the ride. A loaded carrier, spiders, crosspin and new Timken bearings asking $150 plus shipping. Thanks and let me know.
David

Thanks David, I have a lead (only a lead) on a carrier locally, but will not know if it is a go until tomorrow 27th. Will be in touch. Thanks again for the answer and I will let you know.

[68chevyfuelie]

Sold 2.76 ring and pinion locally, carriers still available. Thanks.

[jklonowski]

let me know if you get any 12 bolt ring and pinion 3.42