'78 Harley Davidson Edition - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bobwires · 04-03-2010, 08:30 PM

the headliner was something the owner ordered from LMC or something. some sort of perforated vinyl, but I really don't care for it. I would have rather used a straight vinyl on this one.

HOGDADDY · 04-03-2010, 09:14 PM

Where is the pics for the body of this truck?

bobwires · 04-04-2010, 12:47 AM

it's going out to the body shop for the finishing touches and some fixing of a couple of chips, and it will be ready for a photoshoot

spinem · 04-04-2010, 01:59 AM

yea mod, not posting classified. if you read it you would have see that.
how much those kick pannels cost to make???

bets licea · 04-04-2010, 11:30 AM

looks sweet keep us posted .

bobwires · 04-04-2010, 05:24 PM

the kicks in this truck were super easy. I think I charged him a couple hundred.

bobwires · 04-04-2010, 05:27 PM

Quote:

Originally Posted by spinem

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

yeah - what's up with this post? I forgot to comment on it before.

ADennis · 04-06-2010, 09:57 AM

Nice work! I like the trim panel above the box. Finishes it off nice. Since no one else has asked what are the seats out of?

bobwires · 04-06-2010, 04:29 PM

The seats are a universal aftermarket set out of some magizine with an adapting bracket to bolt into this truck

bobwires · 06-15-2010, 09:03 PM

These stupid seats are horrible. they look nice, but they are much deeper than the stock bench. thankfully the owner is 5'7", so it's no big deal. I'm 6'0", and it's tight sitting in there.

I remade the rear speaker rings and got all the parts into paint.

polyester primer as a primer and sealer. MDF soaks up a lot. builds REALLY high and it sands nice.

camera didn't focus, but the finish turned out good.

04-03-2010, 08:30 PM	#26
bobwires Registered User Join Date: Feb 2010 Location: Ketchikan, AK Posts: 32	Re: '78 Harley Davidson Edition the headliner was something the owner ordered from LMC or something. some sort of perforated vinyl, but I really don't care for it. I would have rather used a straight vinyl on this one.

04-03-2010, 09:14 PM	#27
HOGDADDY Registered User Join Date: Jul 2006 Location: Alabama Posts: 661	Re: '78 Harley Davidson Edition Where is the pics for the body of this truck?

04-04-2010, 12:47 AM	#28
bobwires Registered User Join Date: Feb 2010 Location: Ketchikan, AK Posts: 32	Re: '78 Harley Davidson Edition it's going out to the body shop for the finishing touches and some fixing of a couple of chips, and it will be ready for a photoshoot

04-04-2010, 01:59 AM	#29
spinem haha, ford guys... Join Date: Feb 2007 Location: Visalia, CA Posts: 576	Re: '78 Harley Davidson Edition yea mod, not posting classified. if you read it you would have see that. how much those kick pannels cost to make???

04-04-2010, 11:30 AM	#30
bets licea Registered User Join Date: Jan 2008 Location: chino,california Posts: 16	Re: '78 Harley Davidson Edition looks sweet keep us posted .

04-04-2010, 05:24 PM	#31
bobwires Registered User Join Date: Feb 2010 Location: Ketchikan, AK Posts: 32	Re: '78 Harley Davidson Edition the kicks in this truck were super easy. I think I charged him a couple hundred.

04-06-2010, 09:57 AM	#33
ADennis Registered User Join Date: Nov 2009 Location: NW MO Posts: 9	Re: '78 Harley Davidson Edition Nice work! I like the trim panel above the box. Finishes it off nice. Since no one else has asked what are the seats out of? __________________ 78 2WD SWB 03 Buell Firebolt 984 Last edited by ADennis; 04-06-2010 at 09:58 AM.

04-06-2010, 04:29 PM	#34
bobwires Registered User Join Date: Feb 2010 Location: Ketchikan, AK Posts: 32	Re: '78 Harley Davidson Edition The seats are a universal aftermarket set out of some magizine with an adapting bracket to bolt into this truck

06-15-2010, 09:03 PM	#35
bobwires Registered User Join Date: Feb 2010 Location: Ketchikan, AK Posts: 32	Re: '78 Harley Davidson Edition These stupid seats are horrible. they look nice, but they are much deeper than the stock bench. thankfully the owner is 5'7", so it's no big deal. I'm 6'0", and it's tight sitting in there. I remade the rear speaker rings and got all the parts into paint. polyester primer as a primer and sealer. MDF soaks up a lot. builds REALLY high and it sands nice. camera didn't focus, but the finish turned out good.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.