Rims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Pardue'sCustoms* · 05-23-2003, 06:31 PM

i got a set of 17 and they are 12 wide and 5 3/4 bs will they fit

*Pardue'sCustoms* · 05-23-2003, 06:32 PM

here is a pic.

TIMSPEED · 05-23-2003, 06:39 PM

Wow..that's a wide rim! I have a 17" x 9½" rim with 5½" BS and they fit perfectly...so..with as 12" wide rim..I think you'd need like 8" of backspacing.

PHOENIX · 05-23-2003, 07:46 PM

What eactly do you mean will they fit?

Bolt Pattern 5 on 5.

The wheel will stick out about 1" past the rear wheel well outer edge.

I have 15x10's w/ 4-1/2" BS on the rear and they line up almost perfectly with the wheel well edge.

bagged78 · 05-24-2003, 10:14 PM

Bolt um up and find out?
I had 17/9.5 with 5.5 backspece ithink, they were for a 88-98 chevy.. They were reel close on the inside, about 1.5in or so, kinda rubbed when goin into steep drive ways on an angle, but only on the inside of the inner fender well, but on the out side edge i had about 2 or 2.5 inches to work with so they could be close, should look killer if they work..

**N2TRUX** · 05-24-2003, 11:10 PM

Are those American Racing Torque Thrust II ? If so, you may be incorrect about them being 17"x 12" wheels. They are probably 17"X11", They don't show them in a 12" width....

84Stepper · 05-25-2003, 09:24 PM

Nope, those sure are not AR Torque Thrust II!

*Pardue'sCustoms* · 05-26-2003, 10:54 PM

AR Torque Thrust II!
yes they are and 17x11 is right

**N2TRUX** · 05-27-2003, 12:07 AM

Quote:

Originally posted by 84Stepper
Nope, those sure are not AR Torque Thrust II!

M'kay?? What was your guess then?

**N2TRUX** · 05-27-2003, 12:10 AM

Quote:

Originally posted by Pardue'sCustoms
AR Torque Thrust II! yes they are and 17x11 is right

I thought so. I had recently been on their site looking at them myself. I decided to go with Billet Specialties "Vintec" instead.

The AR Torque Thrust II is a sweet classic wheel. Did you find out if they will fit?

05-23-2003, 06:31 PM	#1
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 621	Rims i got a set of 17 and they are 12 wide and 5 3/4 bs will they fit

05-23-2003, 06:32 PM	#2
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 621	here is a pic. Attached Images

05-23-2003, 06:39 PM	#3
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Wow..that's a wide rim! I have a 17" x 9½" rim with 5½" BS and they fit perfectly...so..with as 12" wide rim..I think you'd need like 8" of backspacing. __________________ I have a few cars... See Them Here

05-23-2003, 07:46 PM	#4
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	What eactly do you mean will they fit? Bolt Pattern 5 on 5. The wheel will stick out about 1" past the rear wheel well outer edge. I have 15x10's w/ 4-1/2" BS on the rear and they line up almost perfectly with the wheel well edge. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

05-24-2003, 10:14 PM	#5
bagged78 world class smart ass! Join Date: Jan 2003 Location: Clinton Utah Posts: 335	Bolt um up and find out? I had 17/9.5 with 5.5 backspece ithink, they were for a 88-98 chevy.. They were reel close on the inside, about 1.5in or so, kinda rubbed when goin into steep drive ways on an angle, but only on the inside of the inner fender well, but on the out side edge i had about 2 or 2.5 inches to work with so they could be close, should look killer if they work.. __________________ Aric 75 2WD BLAZER (never ending project) -some day maybe- 02 2500HD CREW CAB 4X (daily drive) -8" lift 37s and 22s- ____ ____________________________

05-24-2003, 11:10 PM	#6
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Are those American Racing Torque Thrust II ? If so, you may be incorrect about them being 17"x 12" wheels. They are probably 17"X11", They don't show them in a 12" width.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

05-25-2003, 09:24 PM	#7
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Nope, those sure are not AR Torque Thrust II! __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

05-26-2003, 10:54 PM	#8
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 621	AR Torque Thrust II! yes they are and 17x11 is right



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.