![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2009
Location: MT
Posts: 319
|
Re: painting new heads..
You could put high heat clear coat on them if you like the way they look now. Should hold up like any other high heat paint. Had a friend that did a manifold that has held up really well. Not quite the heat though...
You can wash down your cam with mineral spirits to remove the rust preventative that is placed on the cam. I used acetone because thats what I had on hand. Just make sure everything is as clean as possible with your cam and lifters. And if its a flat tappet, plenty of lube...moly. Make sure to prime your lifter before you drop them in as well.
__________________
'67 C-10 Shorty - 454, 5spd, and speed holes! |
![]() |
![]() |
Bookmarks |
|
|