![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#10 |
Registered User
Join Date: May 2005
Location: PA
Posts: 2,696
|
Re: Is it necessary to run rubber fuel line from the cab to the frame?
Ok, so now I feel like I'm going in circles... My main goal was to minimize rubber, but it seems like I'll be using a lot more than I wanted to.
Rubber from the bottom of the cab over to the pre-filter, then between both filters, and the pump, that takes up about 18", then I have maybe a foot or so before I'm up to the bottom of the firewall. BUT!!! -- I'll be transisioning away from the frame, and should be using rubber again. What do I do? Just terminate the steel with another -6AN male fitting where the frame and firewall kind of line up, and run rubber all the way up to the fuel rail? I thought running some fuel line would be one of the easier things I had to do. Here are some pictures so you can come up with a good way for me to do this. ![]() |
![]() |
![]() |
Bookmarks |
|
|